Advertising on the portal

Clothes pattern for small dogs. Clothing pattern for small breed dogs: interesting ideas, descriptions and recommendations

In sultry frosts, people keep warm with warm clothes. Bad weather also causes discomfort for dogs, it is especially difficult in winter time certain breeds unaccustomed to harsh climates. Clothes for dogs can be made with your own hands using the patterns presented, and they are designed not only to warm your four-legged friend, but also to dress them up, providing you with an original and fashionable wardrobe.

How to properly measure a dog

To ensure that the clothing meets the required parameters, fits the dog perfectly and does not cause discomfort, it is important to take measurements correctly.

  1. It is better to take measurements from a dog when it is standing, fully resting on its paws.
  2. To measure the neck, a rope is tied around it. This determines the length from the beginning of the neck to the end of the body. This line corresponds to the dimensions of the free collar.
  3. The back is measured in the center. The actual size corresponds to the distance from the withers to the base of the tail. The tail is raised or in a standing state. It is better to position the pet so that the owner can see the side.

    The dog should stand straight, not hunched over, or lower its head.

  4. The chest volume is measured behind the front legs. There is the widest part of the animal’s body (including cats).
  5. The overall waist circumference of girls is measured in front of the hind legs. For boys, this is the area in front of the genitals.
  6. The distance between the paws is determined by measuring the length from the front paw to the hind thigh. The dog should stand sideways to the owner.
  7. The length of the sleeves is measured from the middle of the back (spine).

Add 1-3 centimeters to the pattern when cutting the material. This is necessary so that the dog’s clothes fit loosely and do not press the fur.

Material

Some owners prefer to dress the animal not only in winter, but also in summer. Veterinarians advise against doing this.

In the heat and heat, your pet’s skin needs to breathe. And only in the evening, in cool weather, can you put on a T-shirt or T-shirt made of natural fabric - cotton, knitwear - on the dog.

If we're talking about In case of rainy autumn, preference should be given to waterproof material - raincoat fabric, bologna.

As for winter, you should approach the choice of clothing for your pet with all responsibility. Under a jacket or bologna overalls, wear a warm sweater, better knitted with your own hands. To prevent your dog from freezing, a good option for warming him up would be fur, fleece, or padding polyester lining.

Constructing a pattern

To create a pattern, you first need to draw a rectangle. One side is equal to the length of the future clothing. In the figure, mark the points that correspond to the dimensions chest and waist. Afterwards the width of the back is indicated and, if necessary, the pattern line is extended.

The width of the backrest is divided into 2 equal parts. This results in an intersection point. A third of the circumference of the pet’s neck is measured from it. If you connect the points with a semicircular line, you will get the neck parameters. After this, the size of the hole for the dog's paws and tail is calculated.

As for the finished pattern, everything is much simpler here. The selected diagram is transferred to graph paper and cut out in accordance with the dog’s parameters. The finished elements are laid out on fabric, cut out, and then stitched. Next, the neck and sleeves are processed.

How to sew your own clothes

Housewives sticking to fashion trends, do not miss the opportunity to dress up their pets, purchasing a wide variety of clothes for four-legged animals from famous brands.

However, dogs do not always need clothes only to demonstrate the refined taste of the owner. Chihuahuas, Yorkies, short-haired dachshunds, toy terriers are most susceptible to adverse weather conditions. What can we say about the Mexican hairless dog, the American hairless terrier, the “orchid”? Their bodies will quickly freeze under the influence of Russian frosts.

Overalls

Overalls are needed not only for pets with short hair, who always freeze in cold weather, but also for long-haired dogs.

This item of clothing will protect the animal from severe frosts, dust, dirt, and slush. The owner will not have to wash and comb the dog every time after a walk, removing all kinds of Velcro from it.

Pattern for warm overalls.

It can also be used as workwear. To determine the length of the cage, the length of the back is measured. To do this, a flexible centimeter is stretched from the withers to the base of the tail. The resulting length is divided by 8. For example, 50 cm: 8 = 6.25 cm. This will be the size of one cell.

Costume

If the dog owner does not want to see his pet dirty after a walk or does not want him to freeze, it is advisable to sew him a warm suit.

The cut should be comfortable so as not to restrict the dog’s movements. As for the fabric, it is selected depending on the weather. If we are talking about autumn, then the best option there will be waterproof material. At the same time, increase the pattern by a few centimeters and repeat it on the fabric used. Then both patterns are sewn together, the clasp and cuffs are inserted. Now you don’t have to put off your walk, even if it’s raining outside.

Dog costume pattern

Raincoat

The main rule for sewing a raincoat is the choice of fabric. For small dogs it is better to purchase soft and thin material, for large dogs - dense and durable. You should not give preference to cheap materials so that the skin does not overheat. The fabric from which the raincoat is made should not bunch up, irritate the dog with rustling noise, or slide off. Therefore, the material should be approached responsibly.

Pattern for the simplest dog raincoat.

blanket

Unlike overalls, blankets are much more comfortable for a dog to wear. They do not restrict movement, are easy to put on, and are made of lightweight materials.

Dogs may need blankets in 3 cases:

  1. After the operation, it is put on the stomach and fixed on the back so that the pet does not lick the stitches. Blankets are sewn from natural materials - cotton, linen, knitwear. Synthetic fabrics You should not use it, otherwise the wound will swell, sweat, and overheat.
  2. For walking in cold weather. Sewn from warm materials - fur, wool, felt. Such clothing will protect the dog from hypothermia.
  3. For a walk in rainy weather. Made from waterproof materials.

Taking measurements from a dog for sewing a blanket

Pattern and photo of postoperative blanket

To sew a blanket for the cold, you should use the same pattern. Only this will be half of the finished product. That is, the fabric needs to be folded in half. The cut is applied to the fold of the material.

Velcro, strings, and buttons are used to secure the blanket.

Sweater

The dog will need a jacket in cold, windy weather. If executed correctly, the proposed pattern is suitable even for the most active doggies, since movements are absolutely not constrained.

For brightness, you can sew small details, decorative elements, patterns, stripes, pockets, zippers, and so on on the back.

Pattern for a jacket

Dresses

A four-legged fashionista in a dress always causes affection among owners or others on a summer walk. In order to create a beautiful sundress for a pet, you do not need to have the skills of a professional. Even novice seamstresses can sew a dress for their beloved dog. Everything is done according to the pattern, and then the item is complemented with decorative elements.

Any openwork fabric, lace and multi-colored ribbons are used for this. The more elements are used, the more elegant the dress will look.

For the skirt you will need a lace ribbon. Its width should be equal to the dog’s waist (measurement taken in front of the hind legs).

Patterns for dresses

Vest

The vest is good for walking in cold and cool weather. In cold weather, it is worn over overalls and a sweater.

The length of the cage in the proposed pattern is equal to the distance from the collar to the base of the tail, divided by 10. So, if the length of the back is 30 centimeters, then the size of the cage will be 3 centimeters.

Pattern for a vest

The material used for this is different. It can be raincoat fabric, soft drape, fur, flannel, knitwear, bologna and so on. If you plan to sew a vest with a lining or wear it over overalls, then an allowance is made on the back for the fastener.

Jacket

To protect your pet from bad weather, be it rain, snow, wind or frost, you need to sew a jacket. For winter it is preferable to use a lining.

If you plan to wear it over a sweater or overalls, add 1-3 centimeters to the pattern. The autumn jacket is made from waterproof materials.

Jacket pattern for boys and girls

T-shirt, panties

The T-shirt is worn on a dog on a cool summer evening.

It is sewn from natural materials so that the pet’s skin can breathe: cotton, linen, knitwear. For this, use a regular children's T-shirt or turtleneck. You only need 2 parts. The one on the left is the back, the one on the right is the tummy.

Pattern for a T-shirt

Panties are needed during heat, to prevent other dogs from being allowed near the dog during a walk, or immediately after giving birth. We are talking about sanitary panties, which must include a pad. They will protect furniture and floors from bloody discharge.

The simplest option for sewing panties for a dog is old children's tights. All you need to do is step back a few centimeters from the crotch and cut off the excess tissue. After this, a hole is made for the tail. The cutting line needs to be hemmed.

The main thing is that the elastic band of the tights does not put pressure on the dog’s stomach and does not fall off. If the dog pulls off his panties, then the remaining parts of the tights are used as suspenders.

There is a more complex version of dog pants with a pattern.

T-shirt

The T-shirt is ideal for a summer walk in evening time when there is a chill in the air. You can sew it from an unwanted children's T-shirt. It is better if it is made from natural materials. This is how your pet's skin breathes.

Pattern for a T-shirt made from children's clothing

Trousers

Dogs also need pants, especially in cold weather. You can sew them with a warm lining made of wool, fur, and so on. To prevent your pet from getting wet, it is advisable to use waterproof fabrics.

Pattern for pants

Make pants for miniature dog You can use warm socks or knee socks. To do this, the heel of each sock is cut off. Next, an incision is made to the elastic band. It turns out two parts that are sewn together. The edges are hemmed. The belt is made of elastic or lace.

Hat, cap and panama hat

Some dogs have hats in their wardrobe. Some will think that this is the owner's whim. However, veterinarians call caps and Panama hats essential for dogs in sunny weather. A hat won't hurt even in severe frosts. They are sewn from durable material lined with fur or wool.

Measurements for headgear

Pattern for a cap

Pattern for a winter hat

For toy terrier

Pattern for overalls

Pattern for blanket

Pattern for a raincoat

Pattern for a dress

For Spitz

Pattern for overalls

Pattern for summer overalls

For Pekingese

Pattern for overalls

Pattern for a vest

Yorkie

Pattern for overalls

For chihuahua

Pattern for overalls with a hood

The second version of the pattern for overalls

Pattern for blanket

For a dachshund

Pattern for blanket

Pattern for a crochet sweater

For a pug

Pattern for knitted overalls

Pattern for coat

Pattern for a vest

For a puppy

Pattern for a vest

Pattern for blankets

Pattern for denim overalls

Pattern for pants

For Labrador

Pattern for overalls

Pattern for a vest

Knitted items

Dogs have always been popular pets. These charming creatures require special care. Some of them are susceptible to unfavorable conditions, so they need clothes.

There is one for dogs large number stores that offer jackets, pants, overalls from famous brands. To save money, you can knit clothes for your pet yourself using detailed instructions and patterns.

Sweater

Pattern for knitting a sweater

The second version of a knitted sweater pattern with step-by-step instructions

The second version of the knitted hat pattern

The third version of the knitted hat pattern

blanket

Pattern for a knitted blanket

Shoes

Buying boots for a four-legged pet is not difficult. However, no one can guarantee that the animal will be comfortable in them. Therefore, it is better to make shoes for the dog with your own hands. Here you can take into account all the features of your pet - the angle of elevation, the size and placement of the paws, the height of the boot. But the most important thing is that sewing or knitting boots for a dog is not at all difficult, especially since detailed descriptions and diagrams.

Some useful tips:

  1. Shoes for dogs should be sewn in pairs, since the size of the back and front slippers differ from each other.
  2. Boots should not slip, so a rough material is selected for the sole.
  3. Shoes should not be tight. Therefore, it is more advisable to leave a reserve. Otherwise the dog will refuse to wear it.
  4. For accurate measurements, the dog must stand upright, fully resting on its paws.
  5. Buttons and zippers are not used as fasteners. It would be better if it was an elastic band, Velcro, or braid with a fastener. The fasteners should not squeeze the paws, otherwise blood circulation will be disrupted and the dog will quickly freeze.
  6. To prevent shoes from chafing, the seams are made on the outside.

Pattern of shoes for a dog

The central circle is the outline of the foot. The line between the circles is the desired height of the boots.

The second version of the shoe pattern, in which you can walk in any weather.

As you can see, sewing clothes for a pet is not difficult. Also, using patterns you can make not only sweaters, overalls, jackets, but also a muzzle, harness, and bed. And to make it easier for the owner and not have to measure the dog every time before creating a thing, you can make a mannequin that matches the parameters of the animal.

Small breeds of dogs are more susceptible to adverse weather, so they need clothing more than others. Even if you don’t want to buy overalls, jackets, and so on decorated with various details, then you can’t do without functional wardrobe items. The dog must have winter clothes and shoes.

Walking options are made from practical materials that are easy to clean off. Not very suitable for autumn thick fabrics, which I will protect from moisture. For winter clothes for dogs the presence of insulation is important. Exactly last group is most popular among owners of mini dogs.

Shoes are needed not only to protect from the dirt and salt that are sprinkled on the roads, but also to prevent damage to the paws from glass, stones, and metal parts that may be lying in the grass.

All kinds of decorative wardrobe items are not always carried functional purpose. They can act as decoration for the animal. Such options are also gaining popularity and conquering markets at a fairly high speed.

If you know how to sew or knit at least a little, then You can make clothes for your pet yourself. If you haven't done this before, then first try sewing new item a wardrobe for a dog from an old jacket, raincoat, jeans or other clothes. And we will consider basic clothing patterns for dogs.

Designations in the picture:

  1. back length from withers to tail
  2. neck girth
  3. chest girth
  4. waist circumference
  5. distance between paws (belly length)
  6. chest width
  7. front paw length
  8. length hind legs
  9. belly length for males
  10. ear to ear distance
  11. head circumference
  12. muzzle girth

To get it right take measurements from the dog, there are a few things to consider. The dog should take a position as close as possible to its usual one, and then it should be measured in several places. You must measure the back, neck and chest, waist, belly (lengthwise), chest width, paws (lengthwise), crown, head and muzzle diameter.

An example of a simple blanket for a dog. Pattern

To make a blanket for a dog, you need to measure the back (AB) and neck (BAB). The back part can be made from either one or two parts. If there is only one piece, then the material must be folded in half. It is important to leave allowances.

Now you need to attach the collar and back in the direction of BAB. In this case, the points must coincide. The collar is sewn in a circle, and a belt is sewn underneath. Let the so-called T-part go around the back of the animal and act as a retainer. Where point B is located, make a loop for the tail. The width of the belt can be increased: then it will cover almost the entire stomach. You can sew insulation on the back side.

Designations in the picture:

  1. neck girth;
  2. back length from neck to tail;
  3. distance from neck to elbow joint;
  4. the width of the belt on the stomach, depending on desire;
  5. 2/3 of the neck circumference;
  6. 2/3 of chest circumference;
  7. 7+9 = 1\3 of chest circumference plus 2-5 cm;
  8. collar width, depending on desire.

To make a knitted blanket, you need to measure the neck, back, the distance between the neck and elbow, the width of the belt and collar. You also need to calculate values ​​such as 2/3 of the neck, 2/3 of the sternum.

You need to start the product from the collar. There should be 2-3 loops in 1 cm. Continue knitting in the round until you reach the desired length, then cast off one-third of the stitches. Continue knitting the back, adding loops along the edges every other row. Once the back is equal to the width of the chest, do not add loops. Approximately 10 cm before the bottom edge, decrease two loops at the edges. The belly and paws need to be knitted separately. How long they turn out will determine where the zipper will be placed.

To sew a vest, you will need to measure your back and chest in the area located behind the elbow. Divide the length along the back into 10 parts. This will be the side of one square on the grid. Make a grid on the sheet, and then transfer the drawing to the pattern. Don't forget to leave allowances.

The belly will be made from one piece. If it is necessary to make a lining, you will need to cut out two copies of the parts. After you have joined the lining to the main product, baste the pieces. Next, you need to sew the parts of the stomach and back so that the letter designations match. Then you can start processing the armhole and collar.

We knit a sweater for a mini-breed dog puppy

To make a sweater for a mini puppy, you need to place the sock so that the heel is pointing up. Mark the holes for the paws. It is necessary to take into account that the heel will be located on the puppy’s sternum. Before cutting holes, go over future cuts with a regular seam. Using a crochet hook, carefully tie up the legs and sleeves. Then sew them and make a hole for the tail. Do not forget that in order for the dog to relieve itself, you also need to make a hole.

Making a T-shirt is also easy. To sew it, use a children's T-shirt. Mark the length of the dog's back on it. The lower back is cut along a convex line, and the lower abdomen is cut along a concave line. The widest place will be where the sternum is located. Now you need to process the cuts, not forgetting to sweep the side seams to B. Try it on and, if necessary, increase the size of the armhole. Now sew the parts and do not forget about the need to finish the seams.



To make a sweater for a small dog, you can use a sleeve from a similar human subject wardrobe It is desirable that it be made in a chunky knit style. Add about 5 cm to the length of the back. Mark the places where the sleeves will be, cut holes and process the sections. From the unused part of the sweater, cut two rectangular pieces and sew two cylinders. These will be the sleeves that you will sew to the main piece. Don't forget to sand the bottom.



To make a sweatshirt, you need to measure the back and chest. Make patterns from knitwear. Don't forget about allowances. Form the hood, fasten the parts of the sternum and back, and then sew the product. For decoration, you can trim the edges with bright braid.

To knit a hat, first cast on 20 loops with knitting needles, knit 10 cm and count the number of loops in one cm. Measure the dog’s head and divide the resulting value in half. Cast on the resulting number of loops and make a fabric corresponding to the height of the hat, multiplied by two. Along the edges (about 5 cm) knit with an elastic band. Now fold the product in half so that the elastic protrudes a couple of cm on the front side. Next, sew the seams. The corners of the resulting hat can be decorated with decorative elements. To make a set, you can knit an additional scarf.

With a little patience, sewing clothes for your pet will not be difficult at all. This will also take a minimum of money and time. In addition, you may have interesting hobby, which will benefit both you and your beloved dog.


Small breeds of dogs need clothing not only because of fashion, but also because of the lack of undercoat or hair itself (Chinese Crested, for example) and for this reason they are constantly cold and can even get sick due to hypothermia. Patterns for creating cute and comfortable dog clothes are completely different today, but we will present the most popular ones.

Let's look at the main types of clothing for small dog breeds

Functional clothing– things used for autumn-winter-spring walks: these are jackets made of light but waterproof material, warmer fur coats or down jackets, as well as safety shoes.

Decorative clothing- it includes things that do not carry any functional load, but serving for purely aesthetic purposes. This various dresses, blouses, pants, T-shirts and other things that, in their assortment, are close to the human wardrobe.

Buying ready-made clothes for your pets or sewing them yourself is a matter of taste and wallet for each individual owner. This article will talk about how to sew clothes for your dog without spending a large amount of money, because for this you can use your old boring things, such as a jacket or jeans.

Let's look at how to sew clothes for a dog using a pattern, using the example of a sports overall for a Chihuahua. For work we will need: a sheet of paper, fabric (preferably cotton or knitted velor), threads in the color of the fabric, sewing machine(you can do without it - the overalls are not large size), rhinestones or other decorations at your request.

Stages of sewing overalls for a domestic dog using patterns

First, we make a pattern on paper, if necessary, adjusting it according to the size of your dog. To construct this pattern, a 2*2 cm cage is used, the length of the dog’s back is 22 cm.

At this stage, it is important to correctly construct all the clothing patterns for the dog, and several nuances must be taken into account: the gender of the animal, the volume of fur, skin folds, nails, tail, freedom of movement. It is also important to take into account the characteristics of each specific breed: for example, when sewing clothes for Yorkies, you need to make an allowance for freedom of movement, taking into account the volume of fur, and in clothes for a French bulldog there should be a wider neck, since dogs of this breed have a thick and massive neck .

We cut out the finished pattern and transfer it to the fabric, leaving 1 - 2 cm for allowances, taking into account all the features of your dog. We sweep the product along the seams and try the overalls on the dog. After we are convinced that it is in season and the animal feels comfortable in it, we finally sew it together. Glue rhinestones, sew on stripes or other decorations that you have prepared. The end result should be a suit like this.

By analogy with this costume, you can sew several more models of clothing for a Chihuahua (for example, a raincoat or a poncho with a hood). Dogs of this breed have delicate skin and quickly lose heat, so to protect against scratches, it is recommended to wear it at all times, regardless of the weather.

Warm clothing is also necessary for dog breeds such as the Chinese Crested and Toy Terrier. The fact is that the Chinese Crested has practically no hair, and the Terriers have no undercoat, as a result of which these dogs almost constantly freeze, even in an apartment.

We are trying to study popular types of shoes for small breeds

In addition to clothing, in winter for dogs small breeds Shoes are also needed to protect the paws from glass shards, garbage and chemicals that are sprinkled on the streets in cities. Shoes, like clothes, can easily be made from old things, such as a woolen jacket. The sole is usually made from genuine leather, suede or other waterproof materials. Winter shoes are usually lined with fur, padding polyester, fleece or other insulating materials. To keep the boots securely on the paws, Velcro, buckles, and elastic bands are used.

As an example, I suggest looking at a few photos with shoe options for your pets, which you can make yourself:

  • When sewing shoes, the main thing is not to allow the elastic bands to put too much pressure on the limbs, otherwise blood circulation will be disrupted and the paws will quickly freeze. To create a shoe pattern, you need to put the dog on a sheet of paper, outline the paws (note that the front and hind limbs different in size) and add 10 - 12mm for a loose fit.
  • Today on the Internet there are a large number of sites offering free downloads of clothing and shoe patterns for dogs. various breeds. On the one hand, this is very convenient - you don’t need to bother with drawings. It is enough to print out the pattern and start sewing, but such ready-made drawings, as a rule, do not take into account the characteristics of an individual dog and it may happen that the downloaded pattern will not suit your pet.
  • In any case, regardless of whether you download a ready-made pattern or draw it yourself, making clothes for your dog with your own hands will allow you not only to dress your pet in comfortable clothes, but also to create his individual wardrobe, which will not be similar to any other dogs.

As an example, I offer several photographs with original clothes for dogs.

In cold weather, rain, heavy snow or wind, people wear warm, waterproof clothes, hats, and scarves. Our smaller brothers - dogs - also get cold and catch colds, and since people are responsible for those they have tamed, it is the direct responsibility of people to monitor the health of their four-legged comrades, protect them from colds and select clothes appropriate for the weather.

First of all, clothes are vital necessary for small “pocket” dogs, such as:

  • toy terriers;
  • Yorkshire Terriers;
  • chihuahua;
  • Chinese Crested;

These breeds of small dogs have very short and fine hair without undercoat, and crested breeds They have no hair on the body, only in the ears, muzzle and tail. Owners of such breeds, especially crested and Chihuahuas, should special attention pay attention to your pets’ wardrobe to avoid unnecessary hypothermia, pneumonia and other complications.

Wardrobe

Every dog, and especially small breed dogs (such as Chihuahuas), should have its own wardrobe. Of course, you can do without decorative suits and dresses. But Warm clothes are a must-have in your wardrobe:

  • A suit-overall made of raincoat waterproof fabric: this thing will save your dog from hypothermia in cold weather, and your apartment from black puddles and stains;
  • A jumpsuit with padding polyester or faux fur will protect your pet from cold weather, chilly winds and heavy snowfalls;
  • A knitted sweater made of thick yarn or a shirt made of thick knitwear will protect your pet from minor spring and autumn cold snaps;
  • An insulated blanket for dachshunds and other hunting breeds will help protect the animals’ lungs from hypothermia;
  • It is also advisable to have boots with waterproof soles in your wardrobe, which will save the paws of small dog breeds from hypothermia, frostbite, mechanical damage and chemical burns;

Taking measurements yourself

In order to create a clothing pattern for your animal with your own hands, you must first remove it from your dog or similar dog same breed all necessary measurements, that is:

Transferring measurements to patterns with your own hands

When transferring measurements to a pattern for future clothing, you need take into account seam allowances. The parts cut out by yourself will be sewn together, but at the same time they should be free and not restrict the dog’s movements. Therefore, on a do-it-yourself pattern, on each side you should leave 1 to 3 cm for seams and free movements dogs in clothes. After cutting out the pattern and basting it, you need to put it on your dog and see if it fits well, if it does not cause discomfort to the animal, and if it is the right size.

If the pattern fits well according to all these parameters, then it can be stitched on a machine or carefully stitched by hand. Fasteners, as a rule, on such models are made on the back in the form of zippers, this makes it easier to dress active and playful dogs before the walk.

Basic and most common patterns

Simple blanket

The back can consist not only of two parts, but also be one-piece. The entire model consists of 4 pattern pieces. The back and collar parts are sewn along the BAB line, then the collar pattern is secured into a ring with threads or buttons (clasps), and the T-shaped belt pattern is attached along the bottom and the blanket is secured with it. You can attach a tail loop to the end of the blanket. The blanket can also be made insulated by placing padding polyester or thick knitwear on the lining, but for such a model it requires twice as many patterns, that is, 8.

Vest

In this model, the back will be sewn from two patterns, and the belly from one. If you want to make an insulated vest, you will need to cut out twice as many patterns and sew a layer of insulating padding polyester between them. First, a zipper is sewn into the back part, and then the parts are sewn together.

Sweater for a small dog

This sweater can be sewn from a regular sleeve from an old sweater without using any pattern. The bottom of the sleeve will become the dog’s collar; from it you need to set aside the length of your dog’s back and, having previously stitched the sleeve, cut off all excess. Then mark and cut holes for the legs.

Overalls

The jumpsuit consists of 11 parts: two patterns for the back, two patterns for each leg and one pattern for the tummy and chest. First, a lock is sewn between the two back pieces, then the back is sewn to the belly piece, leaving holes for the sleeves. Each sleeve is sewn separately and then sewn to the main part of the overalls. If you want to make a jumpsuit for the colder season, you need to cut out twice as many parts, and between them there are insulating parts: synthetic padding or faux fur, the inner part can be cut out of thick knitwear or wool, and the outer part from a waterproof material. Then the overalls can be worn on the dog in the cold, in the snow, and even in the rain instead of a raincoat.

Decorative clothing

T-shirt

The easiest way to sew a T-shirt for a dog is from an old children's T-shirt, but it is worth remembering that the bottom of the T-shirt will remain convex along the back of the dog, and it will need to be shortened along the stomach. You also need to take into account that the widest part of the dog’s body is the chest, and therefore clothing patterns need to be swept away, after trying them on and making sure that the dog’s movements are not constrained. Only if the dog is comfortable in clothes, you need to sew a T-shirt.

Dress

In addition to sweaters, overalls and vests, you can sew your pet with your own hands and decorative clothing, for example, a dress. For the main part of the dress, a vest or T-shirt made of light fabric is suitable, and for the skirt, a rectangular piece of fabric, equal in length to two girths of the dog’s abdomen, is suitable. Additionally, the dress can be decorated with silk, chiffon, satin ribbons, beads or stripes.

Additionally

In addition to sweaters and vests, you can also sew your pet your own a hat or scarf and boots. The main thing is that things are convenient, comfortable, made from natural fabrics and do not restrict the dog’s movements. All this will help your dog avoid drafts and complications from colds during the cold season.

Today there are hundreds of breeds in the world, many of which are not at all adapted to the harsh climate. This is especially true for small pets (e.g. Yorkshire Terrier or Chihuahua) and short-haired dogs (Doberman, Dalmatian, etc.). It is not surprising that owners try to protect them from the cold by wearing all kinds of jackets, overalls or vests, often resembling a smaller copy of human clothing. However, buy them in finished form can be very problematic, because stores do not always have the required sizes, so in such cases, all that remains is to sew clothes for the dog with your own hands, having previously developed a pattern taking into account all its parameters.

What will you need?

Before moving on to the active stage of work, you need to choose the material for the future overalls. In this matter, preference should be given to light fabric, which has a water-repellent effect and a dense edge, which will help save time on processing seams.

Of course, your dog may have several options in her wardrobe. outerwear, but if this is not the case, then you need to try to make the product as universal as possible (for any weather). To do this, in addition to the material for the top layer, you need to prepare a warmer underlay.

Important! If your dog constantly participates in exhibitions, then you know how important it is to properly care for its coat, soit is better to choose a material with a smooth texture (for example, viscose or silk),so that the fabric does not tangle or damage the hairs.

In addition to the fabric, we immediately prepare other components of successful work:
  • zipper (it is most convenient to use the tractor variety, especially since it has high level reliability and wear resistance, so you don't have to worry mechanical damage teeth or other damage);
  • elastic band (give preference to a product that is round in cross-section: it is more convenient to adjust and it stretches less);
  • fastener on the collar (choose at your discretion: Velcro, button or button).

 You can also choose additional accessories, which from a design point of view will help make the overalls more interesting.

How to take measurements of a dog?

When you have decided on the fabric and model of the future overalls for your dog, it’s time to move on to taking measurements, since it’s unlikely to be possible without a life-size pattern.

First you need to measure the length of your pet's body, starting from the neck to the very base of the tail. Divide the value obtained in centimeters into 8 parts, as a result of which 1/8 of the total length will be equal to 1 square on the pattern sheet.

It is necessary to draw the entire sheet with such cells (for small and medium-sized dogs, a piece of paper or a piece of wallpaper will be enough), preparing a simple diagram of the future product.
Having completed this task, we move on to measuring the circumference of the neck (denoted as K-D), the front (L-I) and hind legs (M-H), the volume of the animal’s hip (F-B), as well as the place where the front paw becomes the shoulder blade (G-D).

Don't forget to measure your waist circumference (A-B) and chest circumference at the deepest part of your chest (D-C). And finally, we measure the circumference of the tail in order to later make a hole the right size(G-H).

Important! EIf you are not a professional and are sewing overalls for the first time, first make trial version using old material (for example, an unnecessary sheet).

To create a pattern for a regular jumpsuit, these measurements will be quite sufficient - provided that you are more interested in a comfortable fit and not in the presence of pockets in certain places or any other additions that require other measurements.

All measurements obtained should be transferred to paper, connecting the points together. In the upper part, you need to add 30 mm to the measurements for the back of the animal.

Making a pattern with your own hands

It should be noted right away that as a result of cutting the paper pattern, you should end up with several separate parts: a pattern for the back, tummy, chest, sleeves and hood (if you are going to add it to the product).

If you are going to sew a product from only one type of fabric, which is easier, separating the pants from the chest is not required. But if you have two types of fabric, and you want the jumpsuit to consist of two parts, then on the largest paper part (the back) you need to draw a dividing line using a ruler (starting at the bend on the belly side and going up).

Now we lay out the fabric (the grain thread should run horizontally) and place the largest paper back pattern on top, folding it back and securing it with pins.
It is necessary to leave seam allowances on all sides (1 cm on the concave lines, 1.5 cm on the other sides, 2 cm should be left for the hem at the bottom). To do this, step back the specified distance from the paper part and draw lines with a piece of soap. Having cut out one part along the marked lines, we proceed to similar markings of the rest.

Important! You need to apply allowances, as well as cut fabric, only along the line of the former fold, since the rest of the part has already been cut from another material.

If you have it consisting of two colors, then the finished product should be two patterns of each of them (before applying the paper cutting, you need to fold the fabric in half). Now we again take the paper pattern of the back and bend the folded part to make a pattern of a different color from it.
We attach it to the fabric with pins and outline it with soap, leaving the same allowances of 1.5 cm.

As a result, you will have two separate pieces of “paper back”. Now, using the same principle, we cut the breast and sleeve from the fabric. As for the latter, often on the pattern the part that goes to the tummy turns out to be narrower at the bottom than the part that goes to the back, so it is advisable to equalize them.

To do this, first we pin the part going to the back to the fabric folded in half, and then we insert a second paper pattern (going to the stomach) to the corner of the future neckline. After this, the second part, not yet attached to the fabric, needs to be moved to the distance that is missing.

Having placed two sleeve parts side by side on one double fabric, step back 1.5 cm on the sides and 2 cm on the bottom and cut out the part (along the perimeter, without cutting the fabric into two parts, like a paper pattern).
You should also cut out a strip for the lock as a separate element so that the slider does not pull in the dog’s fur. The length of this strip should be equal to the length of the chest minus one centimeter. Again, fold the fabric in half and draw out a rectangle 3-3.5 cm wide. After adding allowances, you can cut out this part as well.

From the lining, all the details are cut out in exactly the same way (you must first fold the fabric in half), only when cutting the sleeves you do not need to leave allowances for the hem, but simply trace the existing pattern, folding it bottom part. We do the same with the pants pattern, leaving no allowances.

Did you know? Dogs can recognize up to 250 words and even count up to 5. Their intelligence is at the level of two-year-old human children.

When cutting out the back, there is no longer any need to separate part of the pants and the chest and we simply trace the part around the entire perimeter, retreating 1.5 cm everywhere, only leaving no room for hems in the lower part. In order for the hood to be fastened, we additionally cut out a strap from the fabric (a rectangle measuring 3x4.5 cm + allowances).

Sewing overalls

When you already have all the components of the future jumpsuit, all that remains is to sew them together. Let's start, perhaps, with the easiest thing and sew our strap onto the hood and the locking bar.

This needs to be done only on two sides: top and bottom, so that later you can turn the part right side out and smooth it out thoroughly. We take out the corners of the inside-out parts with a needle, only carefully so as not to pull out the stitching threads.

We sew the finished and ironed elements around the perimeter again, leaving only the cut side untouched (the fold, top and bottom are processed). We take the parts for the hood and manually connect them, after which we sew everything along the same seams using a machine. The front part can be sealed with several lines, or it can be supplemented with a fur strip.

We cut off all processed indents, leaving only half a centimeter after the stitching. Then we turn the hood inside out and iron all the allowances towards the central part. All that remains is to do the decorative stitching, retreating 1 mm from the edge of the seams (set the machine mode to 4).

In exactly the same way, the inner part of the hood is sewn together (from a different fabric), after which its inner and outer parts are sewn together (we connect it “along the face” and then turn it inside out).

Now it’s time to sew the back and pants (an option when the pattern of overalls for a dog was made taking into account the use of two types of fabric), which is also easy to do with your own hands, following the step-by-step instructions provided.
We place these two parts with their right sides facing each other, stitch them down 1.5 cm from the edge, cut off the excess parts, iron them and perform a decorative stitch along the front side. When the back of the future garment has become a single whole, we attach insulation to it (from the wrong side) and baste it.

We do the same with the sleeves, and if some part of the insulation has come out, you can always trim it. When the insulation has taken its place on the largest part of the pattern (back + pants), we proceed to sewing the latter: we bring together the side seams of each part (the insulation should be with outside) and grind them down, retreating 1.5 cm from the edge.

Important! When doing machine stitching, try to grab the insulation only along the very edge, and if it comes out more, cut it off with scissors so that it does not thicken the legs.

There should be 2 cm of fabric left at the bottom for hemming, so if the padding polyester gets within this distance, it also needs to be cut off. Ideally, you should press the seam on the legs so that there are no bulges when processing the sides.
Now we sew the sleeve to the back, just do not confuse the line going to the stomach with the line going to the back (the one above). Having sewn one, we do the same with the other, not forgetting to cut off the excess fabric and padding at the allowances.

We iron the allowance towards the sleeve and next to the main seam we make decorative stitching on the sleeve side. Next, we connect the sleeves to part of the breast. The seams need to be sewn, retreating 1.5 cm from the edge. Having completed this task, we turn everything inside out and move on to connecting the sleeve seam with the side seam.

Important! Do not overstitch where the side seam passes.to the edgebreasts 1.5 cm and insert the elastic (simply sew it on the indicatedfrom the edgedistance along with the side seam).

Processing the sleeve seam (we step back 2 cm from the edge) is done by stitching the corner diagonally (not along the perimeter, but slightly at an angle). When folding the sleeve, this will help the adjacent seams fit together more accurately.

Having sewed all the parts to each other, you need to reduce the allowance along the entire perimeter of the product to 1-1.5 cm. You can also process the seams with a zigzag. For greater convenience, we make several notches in the place where the sleeve is sewn to the part of the body (this will make the sleeve softer and there will be no folds on the front side).
Having turned everything inside out, we iron the seams again and sew on decorative elements: emblems, buttons, buttons, etc. It is important to do this before the lining is sewn.

Let's move on to connecting the lining parts. We sew the pants in the same way, and then connect part of the back with part of the sleeve and tummy. If you have chosen a smooth material for the lining, then we additionally process the seams using an overlocker.

Fold the side seams (sleeve seam and side seam). On one side we sew the stitch without finishing 1.5 cm to the end (as was done with the main fabric), and on the other we sew only the edges, leaving a hole for turning the overalls inside out.

Now we take the hood and turn it inside out with the side that should later end up in the middle. We sew the front parts of both parts together at a distance of 5 cm from the edge, thus aligning the edge of the overalls with the edge of the front part of the hood.
Then we take the lining and, turning it right side out, sew it to the inside front of the hood. Similar actions are also performed on the other side (5 cm from the edge).

After the corners of the overalls are connected to the lining, take the latter and connect it to the inside of the overalls - right sides facing each other. As a result, the inner part of the overalls must be sewn to the lining, and its outer part must be sewn to the product itself.

Sew the strap to the hood, leaving 1 cm from the edge and leaving 1 mm at the bottom.

Time to move on to the zipper. If necessary, it must be shortened so that 1.5 cm remains at the bottom and top (seam allowances). Open the zipper and sew it to the parts of the breast (teeth facing out) so that there is about 2 cm left to the edge. A restrictive strip is sewn on top of one part of the zipper, which is used to prevent wool from getting into the slider (the connection is made in the same seam as the zipper was sewn on, but does not reach its edge).

The entire structure is covered with a lining and stitched again using the same seam. Be sure to trim the seam allowance and fold it toward the breast. The top edge of the zipper also needs to be folded and only then stitched all the way to the end.

Similar actions are performed on the other side: lifting the lining, the zipper is laid with its teeth outward (the slider on its front side should look down).

On this side, the zipper at the top is sewn on top of the already attached tab on the hood. Now we cover the lining and sew it along the same seam. Once the zipper is secured, take the edges of the elastic (so it can taper) and pin it to the zipper seam (it should extend 1.5cm from the edge to allow the seam to contract).
We do the same on the other side.

Having secured the elastic on both sides so that it can later be stretched and sewn, we make a stitch along the zipper, moving to the hood, at the same time sewing its upper part and moving to the second part with the lock.

To complete the task, it is better to use a special zipper foot.

If you have sewn everything properly (you can verify this by slightly turning the overalls), cut off the parts of the fabric protruding above the seams, leaving only 0.5 cm, and make notches in the places where the hood bends.

Now we will sew on the hood. To do this, turn it inside out and tuck it inside between the lining and the main part of the product. We turn out the corners on both sides and connect the two parts of the hood, sweeping them together. In this case, you need to make sure that all its seams match.
Next, we look for places to sew the lining to the main part and, stepping back 5 cm from the edge (exactly at these marks), we begin to sew the hood to the fabric. Be sure to make sure that it lies evenly and there are no unsightly irregularities (all layers should be pulled together). Also, before stitching the seam, be sure to mark the center of the hood.

Finally, we manually sew the lining to the already basted parts (hood and main part), and after machine stitching we trim all protruding parts closer to the seam line, leaving about 5-7 mm.

In places of strong roundings, make notches so that the hood fits more smoothly. We turn the product over to the front side, and, stepping back from the joining line about 0.5 cm, fasten the internal seam allowance, having first pressed it down (first by hand basting, and then by running a stitch along the entire lower part).
To make the result better visible, iron all seams.

Did you know? The only church for dogs is in the USA, where it was built in the 19th century by artist Stefan Hanek. This is how he expressed his gratitude to his own five Labradors, who helped him overcome a serious illness.

When upper part When it’s ready, turn the lining inside out again (lifting it up) and process the edges of the pants. We fold the front part of the pant lining with the front side of the main material, and then put each pant leg from the lining onto a similar part of the main material (just turn it inside out).

The seams on both materials must match. When combined correctly, the front of the lining will be underneath and adjacent to the front of the main fabric. To prevent the seams of the trousers from moving out, it is better to pin them with a pin.
For greater convenience of work, you can tuck the sleeves and all unnecessary parts inside, leaving only the side seam of the overalls that has not yet been sewn. We combine the cuts on both types of fabric (on both sides) with each other and chop them off. At the same time, the lock strap should be moved a little higher so that it does not interfere with work.

Important! It's better to fix it first chest part, simultaneously stretching the elastic band, and only then move down to the pants.

Once you have basted all the pieces in a circle, sew a stitch and cut off the excess, leaving only 0.5 cm from the seam. Next, on the sleeve we find the hole left earlier and carefully turn the entire product through it, then tucking each part into the place reserved for it.

We smooth the edge of the overalls with an iron and, stepping back 0.5 cm from it, lay a decorative circular stitch (through the hood), and sew the parts with the elastic in a zigzag. At this stage, all that remains is to hem the overalls from the bottom, process the sleeves and legs, and also sew Velcro onto the hood.

Let's start with the pants. We turn the legs inside out and, having secured the lining with padding polyester, we fold in the remaining part of the main fabric, sewing holes for the legs in a circle. Having finished with the legs, we move on to the sleeves.
First, let's sew up the hole through which we turned our overalls inside out. To do this, we turn the fabric allowances inward, baste the two edges of the material, and then stitch them on top.

We move to the outer part of the sleeve and sew on the lining so that later we can fold the allowances of the main fabric and sew the holes in a circle. Try to make sure that the lining does not stretch, but protrudes slightly beyond inseam hem, otherwise when the dog moves, unsightly folds will appear on the outer part of the overalls.

Sew more Velcro onto the hood and that’s it - you have ready-made clothes for your pet.