Advertising on the portal

How to craft a command block without mods. Command to take command block

A command block in Minecraft is a block into which you can enter various commands. After receiving a signal from the red stone, it will begin to complete the task assigned to it. The block greatly enhances the capabilities of players and has many uses in gameplay. Thus, many gamers have a question about how to do command block in Minecraft.

Creating a Command Block

It’s not possible to just take and make a command block (from English “command block”) in Minecraft. However, it can be obtained using special cheats and commands.

  1. Launch single player game in Main in creative mode.
  2. In the world settings, enable the function of using cheats.
  3. Puzzled by the question of how to make a command to issue a block in Minecraft, you need to open the console.
  4. In the console line you will need to enter the command: give *player nickname* command_block.

After executing this command, the block will be in the hand of the corresponding player's character.

You can give a block to yourself, to another player, or to an entire group. They cannot be used in survival mode.

How to use the block

The block is widely used in the game, executing various commands.

When the command block is in the character's hands, right-click on the ground to place it. After this, you need to click the same button on the attribute itself.

This will open a command block window where you can enter the required task or change its parameters. In the future, changes can be made at any convenient time. If anything was done incorrectly, the user will receive a corresponding notification in the same window.

Blocks can be in passive mode, launched from chain reaction through similar objects or triggered by a signal transmitted by a red stone. The command block can also have a direction, according to which you can build a whole chain of blocks that are triggered one after another.

If desired, the player can set a binding for the block. Using this function, you can kill specific entities or everyone in the area, in addition to the player himself. The block can also be configured to interact with other players.

In some situations, a command block can be used to teleport one player or an entire group. To do this, you will need to correctly specify not only the command, but also the coordinates.

In principle, the command block supports a lot of tasks, familiarize yourself with full list which are available on numerous Internet resources. You can view the entire list of possible commands directly inside the game by entering /help in the chat window.

Video: How to use the command block in Minecraft.

A command block in Minecraft is a special cell in which the user can enter commands. Commands in the block begin to be executed when a signal is received from the red stone. The command block is a good help for those who create maps in Minecraft, or for those players who want to “privatize” some territory. Using special commands can save you and other players in this interesting, but rather harsh pixel world. So how do you create and activate a command block in Minecraft?

If we answer this question purely formally, then no. You can receive a command block, because a special person is responsible for this matter - the administrator of the server on which you play. You can get the command block yourself (if the game mode is single player). To make a block, type “/give Player command_block”, where Player is the nickname of the player who needs this block.

Let's figure out how to write commands into the newly created command block. To do this, right-click (RMB) on the command block. A window will appear in front of you in which you need to enter commands. In the same window you can see logs of executed commands: this will help you figure out at what stage of “programming” the error was made. To learn all the commands available to you, you need to type “/help” in the chat.

About limiting command actions in Minecraft

Using a command block will make your game in Minecraft more lively and rich. Depending on the type of game, you or your comrades will receive a number of privileges. In this case, the effect of the entered commands can be limited to a certain radius or extended to all players and all entities.

And now - more specifically:

  • @p – the command’s effect extends to the nearest player;
  • @a – the command applies to all players (if possible);
  • @r – command to apply an action to a random player;
  • @e – the command applies to all entities.

Selected for the first team special parameter"c", which limits the number of players to whom the action will be applied. So, @a indicates that the command will be used in relation to the first 10 players from the list, @a - the action applies to the last ten players from the list.

With the help of a command block, you can reverse the entire game and literally change the environment in Minecraft beyond recognition.

Examples of block commands

And finally, here is an example of one of the commands: “give @p gold_ingot 10”. This command instructs to give 10 gold bars to a player who is located 10 blocks away. The command “setblock 10 20 30 wool” places a wool block with coordinates (10,20,30). But with the help of “tp Player 10 20 30” you can instantly move (teleport) the player to a point with similar coordinates.

A command block is a cell in which you can enter various commands. The block itself begins completing the task when it receives a signal from the red stone. This block well expands the actions when creating maps in minecraft, or where there is a right to privatize some part or territory. Using such a block is simply necessary in some game situations, when everything can depend only on you. And the commands that you can enter can save others or protect you in this pixel world.

So, let's look at how to make a command block in Minecraft 1.8.9 without mods. I would like to immediately disappoint you that it is simply impossible to create a command block. But it is possible to get it, since this is in charge of the server administrator. Or the player himself in single player mode. To receive it, you need to type /give Player command_block . The player value is the name of the player who needs this block.

After we learned how to make a command block in Minecraft 1.8.9 without mods, we need to figure out how to write the command itself into it. To do this, you need to open a command block, and this is done using the mouse button. You need to right-click on the block. Next, a window appears in which the command itself is entered. By the way, a little lower there is a log line in which you can conveniently monitor the results of executed commands, as well as errors that may have occurred.

In order to explore the entire list of available commands, you need to type /help in the chat window.

Using a command block will clearly make your game and performance easier, because with such a block you can perform many actions by writing the necessary commands into them. Also, depending on the type of game, you may have some privileges, since you are able to reward your comrades or yourself. Also, the distribution of commands can be adjusted to those nearby, to a random player, to all players in the world, or to all entities that live throughout the map.

The execution of any actions assigned by the game participants is carried out by command blocks. You won't be able to create a team like this while playing in survival mode. Summoning them as tools during use will also not work. game mode creative. To functionally obtain such blocks, you need to use a couple of fairly simple commands, which, in fact, will allow you to call them. Let's look at a few simple methods.

Get a Command Block in Minecraft: Method 1

Launch Minecraft and select single player mode. Create a world with cheats enabled.

Open the chat window and press the “/” key. This symbol will open a window in which you can enter commands.

Enter the destination you need by selecting from the following lines:

  • “/give” the name of minecraft:command_block and the required number - after entering it into the console, the summoned items will appear among the tools;
  • “/setblock x y z minecraft:command_block” – this line turns one of the blocks into another, making it a command block, and to find it, you need to press F3 and select one of the found ones;
  • “/summon Item x y z (Item: (id:minecraft:command_block, Count:1))” – by entering this sequence, the game participant will summon blocks where he needs them.

Get a Command Block in Minecraft: Method 2

Launch the game, select single player mode. Log in to an existing world, perhaps it will be a server. Enter the chat required to set commands by clicking on “/”.

Enter one of the suggested options:

  • “/give name minecraft:command_block required number” – this line allows you to make a call the required number items and add them to your existing inventory;
  • “/setblock x y z minecraft:command_block” – if you enter this text, you can replace any existing block with a command block, and to determine the location where it is located, you need to press the F3 key;
  • “/summon Item x y z (Item: (id:minecraft:command_block, Count:1))” – blocks will appear in the specified area.

Get a Command Block in Minecraft: Method 3

  • Using the "E" key, drag the block and place it on the panel. Click on the right mouse button and place the item on the ground.
  • Click on it again with the same mouse button. This will open a menu where you can configure actions.
  • In this window you need to enter the symbol “/”. The options in these blocks are similar to those used in chat. They are sometimes connected to an electrical board. This allows commands to be executed automatically.
  • Press the “/” key, a console window will appear in which write the word “help”. After it, type the name of the item to which the sequence of commands is prescribed.

When creating any playable map that will differ from randomly generated areas, construction, pixel art or story scenarios, the server administrator cannot do without using the “built-in” functions. To implement them, you can use a command block. This is a special device into which you can record a system command, starting from the player receiving a resource and ending with his teleportation to specified place. But how do you issue yourself a command block?

Warning

There are only two ways to purchase this item. Both of them are that you will need to use system commands. This comes from the fact that it is impossible to make (craft) with improvised materials. That is why the question: “How to issue a command block to yourself?” - remains relevant always. No matter what mods you set for yourself, no matter how you experiment with the ingredients, nothing will work out for you. Anyone who claims that by downloading his mod you will be able to create command blocks is a scammer who is trying to plant a virus on you. So how do you issue yourself a command block?

Methods

The first method of obtaining a command block is that you can create a map in creative mode. The Command Block will be available for purchase among other items.

The second method is a little more complicated. To do this, you will have to use How to issue yourself a command block using the system? To do this, you will have to open the chat and write the following: /give [name:command_block [number]. This command will also be the answer to the question of how to give it to another player.

All syntax is written without parentheses. Instead of the character's name, you must indicate the nickname of the desired player, the number is the number of command blocks received. By the way, the main condition for this command to work is permission to use cheats. If this feature is disabled, you will not receive this item neither in single-player nor multiplayer.

Application

So, let's say you figured out how to give yourself command block, and it is in your inventory. Now let's learn how to use it.

To place a block on the ground, drag it to the quick access panel. After that, select it and click on the desired place. At this moment, a control interface will open in front of you, with which we will enter the function. It is worth considering that one command block can execute only one instruction.

However, it is not always necessary for the player to be able to find a command block and use it. It is much more interesting for the user to press the lever, and a mountain of gold or necessary items appears in front of him. In this case, you can use redstone circuits.

Teams

In order to use a command block, it is not enough to know how to obtain or install it. The most important thing is to be able to correctly write the instruction syntax. To do this, it is important to remember a few simple rules.

  1. First the command itself is written. Any function that can be activated using the console can be written here.
  2. Then the “area of ​​application” is set. That is, the player to whom the effect or coordinates of the appearance of the item will be applied.
  3. And finally, additional arguments that allow you to clarify the characteristics of the object.

In general, the command will look like this.

/[command] [player nickname or coordinates] [parameters]

To make it clearer, let's give a few real examples. Let's start with how to issue items with a command block.

/give @p iron_ingot 30

Using this instruction, the command block will give the nearest player within a radius of 10 blocks iron ingots - 30 pieces. Now let's see how to work with coordinates.

/spawn 10 20 30 /summon EnderDragon

Actually, from the syntax it is already clear that the command summons a dragon at certain coordinates. Finally, we note that full list The commands used by the command block can be seen by typing /help into the chat.