Documents. and repair and construction work
Valid Editorial from 25.02.2000
Name of document | Decree of the Government of the Russian Federation of February 25, 2000 N 162 "ON APPROVAL OF THE LIST OF HEAVY WORK AND WORK WITH HARMFUL OR DANGEROUS WORKING CONDITIONS, UNDER WHICH THE USE OF WOMEN'S LABOR IS PROHIBITED" |
Document type | resolution, list |
Receiving authority | Russian government |
Document number | 162 |
Acceptance date | 01.01.1970 |
Revision date | 25.02.2000 |
Date of registration with the Ministry of Justice | 01.01.1970 |
Status | valid |
Publication |
|
Navigator | Notes |
Decree of the Government of the Russian Federation of February 25, 2000 N 162 "ON APPROVAL OF THE LIST OF HEAVY WORK AND WORK WITH HARMFUL OR DANGEROUS WORKING CONDITIONS, UNDER WHICH THE USE OF WOMEN'S LABOR IS PROHIBITED"
Resolution
In accordance with Article 10 Federal Law“On the fundamentals of labor protection in the Russian Federation” (Collected Legislation of the Russian Federation, 1999, No. 29, Art. 3702) The Government of the Russian Federation decides: To approve the attached list of heavy work and work with harmful or dangerous working conditions, during which the use of women’s labor is prohibited .
Chairman of the Government
Russian Federation
V. PUTIN
Approved
Government Decree
Russian Federation
dated February 25, 2000 N 162
1. Work related to lifting and moving heavy objects manually, in case of exceeding the established standards permissible loads for women when lifting and moving heavy objects manually
II. UNDERGROUND WORKS2. Underground work in the mining industry and in the construction of underground structures, with the exception of work performed by women holding leadership positions and not performing physical work; women engaged in sanitation and household services; women undergoing training and admitted to internships in the underground parts of the organization; women who must go down from time to time into the underground parts of the organization to perform work of a non-physical nature (the list of positions of managers, specialists and other workers associated with underground work, in which the use of female labor is permitted, as an exception, is given in paragraph 2 of the notes to this list)
III. METAL WORKINGFoundry work
3. Cupola maker
4. Casting beater engaged in manual knocking
5. Batch loader in cupolas and furnaces, busy loading the batch manually
6. Casting welder
7. Metal pourer
8. Chopper working with pneumatic tools
9. Melter of metal and alloys
10. Workers engaged in hanging hot castings on a conveyor and servicing and repairing equipment in foundry tunnels
11. Gas welder and electric welder of manual welding, working in closed containers (tanks, boilers, etc.), as well as on high-rise communication structures (towers, masts) over 10 meters and steeplejack work
Boiler rooms, cold forming, drawing
and pressing works
Work performed by profession:
12. Boilermaker
13. A turner on spinning lathes, doing manual work
14. A chaser working with hand-held pneumatic tools
Forging and pressing and thermal works
Work performed by profession:
15. A bandage worker engaged in hot work
16. A spring operator engaged in hot work when winding springs from wire with a diameter of over 10 mm
17. Roller busy rolling out rings while hot
18. Spring operator at hot metal processing
Metal coating and painting
19. Sealing inside caisson tanks
20. Constant work on lead plating using the hot method (not galvanic)
Mechanical and metalwork-assembly works
Work performed by profession:
21. A pneumatic driller performing work with a pneumatic tool that transmits vibration to the worker’s hands
22. A repairman engaged in: setting up equipment in workshops and departments:
hot rolling, pickling, enameling, insulation using silicone varnishes, lead plating in cable production;
on hot repairs of selenium and shoeing devices (equipment);
setting up equipment in workshops and departments for the preparation and use of organosilicon varnishes and varnishes containing 40 or more percent of toluene, xylene;
repair of equipment in closed fuel warehouses and oil facilities at thermal power plants, as well as repair of equipment in tunnels and heating chambers in heating networks; maintenance of water jacket furnaces in the production of non-ferrous metals and alloys; adjustment and repair of chill molds in a hot state; directly in the shops: milling, lubricating, forming, foundry, pipe-filling, glast-mixing and assembly shops in the production of lead batteries; repair of technological equipment at engine testing stations, running on leaded gasoline and located in boxes
Working with lead
23. Smelting, casting, rolling, drawing and stamping of lead products, as well as lead coating of cables and soldering of lead batteries
IV. CONSTRUCTION, INSTALLATION AND REPAIR WORKS24. Hot repair of furnaces and boiler furnaces
25. Uprooting stumps
26. Fastening structures and parts using a construction gun
27. Slab breaking works, dismantling of buildings and structures
28. Punching holes (grooves, niches, etc.) in concrete, reinforced concrete and stone (brick) structures manually and using pneumatic tools Work performed by profession:
29. An armature worker engaged in manual installation of frames, manual bending machines and scissors
30. Asphalt concrete worker, asphalt concrete worker-cooker, working manually
31. Hydraulic monitor
32. A digger engaged in sinking wells
33. A mason engaged in laying modular solid sand-lime bricks
34. Roofer for steel roofs
35. Caisson operator-operator, caisson operator-miner, caisson operator-fitter, caisson operator-electrician
36. Motor grader operator
37. Asphalt dispenser driver, pit driver
38. Operator of a concrete pumping unit, operator of a mobile bitumen melting unit
39. Bulldozer driver
40. Grader-elevator driver
41. Operator of a mobile asphalt concrete mixer
42. Asphalt concrete paver operator
43. Driver of a single-bucket excavator, operator of a rotary excavator (ditch digger and trencher)
44. Operator of a mobile electric welding unit with an internal combustion engine
45. A mobile power plant operator working at a power plant with an internal combustion engine with a capacity of 150 hp. With. and more
46. Communications installer/antenna operator working at heights
47. Installer for installation of steel and reinforced concrete structures when working at height and steeplejack work
48. Lead solder (lead solder)
49. Carpenter
50. Plumber repairing the sewer network
51. Pipe laying of industrial reinforced concrete pipes
52. Pipe laying industrial brick pipes
V. MINING WORKSOpen pit mining and surface mining
and mines and mines under construction, enrichment, agglomeration,
briquetting
Work performed in general mining and capital mining professions:
53. Hole driller
54. Bomber, Master Blaster
55. Miner for fire prevention and extinguishing
56. Delivery of fastening materials to the mine
57. Fastener
58. Blacksmith-driller
59. Drilling rig operator
60. Loader driver
61. Machine operator for drilling full-section mine shafts
62. Excavator operator
63. Tipper engaged in manual rolling and rolling away of trolleys
64. Miner
65. Stemman, busy manually feeding trolleys into cages
66. Cleaner busy cleaning bins
67. Electrical mechanic (mechanic) on duty and for equipment repair, engaged in the maintenance and repair of equipment, mechanisms, water and air lines in mining operations Work performed in the general professions of beneficiation, sintering, briquetting and certain categories of workers:
68. A crusher engaged in crushing hot pitch in the production of alumina
69. A roaster engaged in the process of roasting raw materials and materials in the production of mercury
70. Workers and foremen of processing and crushing and screening factories, mines, mines and metallurgical enterprises engaged in crushing, grinding, grinding and blending of ferrous, non-ferrous and rare metal ores, fluorspar and coal, which generates dust containing 10 percent or more free silicon dioxide, when working manually
71. Workers employed in lead enrichment shops
72. Workers and craftsmen engaged in the enrichment of niobium (loparite) ores
Construction of subways, tunnels and underground
special purpose structures
Work performed by profession:
73. Mining equipment installer
74. Miner at surface works
Ore mining
Work performed by profession:
75. Placer miner
76. Bit refueler
77. Drager
78. Dredge sailor
79. Dredge driver
80. Rocket launcher operator
Extraction and processing of peat
Work performed by profession:
81. Ditchman
82. Groomer
83. Operator of machines for the extraction and processing of sod peat
84. Operator of machines for preparing peat deposits for operation
85. Peat excavator operator
86. A peat worker engaged in felling trees and laying peat bricks
Processing of brown coals and ozokerite ores
Work performed by profession:
87. Production operator mountain wax
88. Ozokerite and ozokerite products production operator
89. Crusher
90. Briquette press operator
91. Filling machine operator
VI. GEOLOGICAL EXPLORATION AND TOPOGRAPHIC-GEODETIC WORKSWork performed by profession:
92. Detonator, Master Demolitionist
93. Installer of geodetic signs
94. Electrical mechanic (fitter) on duty and equipment repair, employed in the field
VII. WELL DRILLINGWork performed by profession:
95. Driller for production and exploration drilling of oil and gas wells
96. Derrick erector, rig-welder, derrick-electrician
97. Drilling rig operator
98. Well cementing operator
99. Motorist of a cementing unit, motorist of a cement-sand mixing unit
100. Pipe crimper
101. Assistant driller for production and exploration drilling of oil and gas wells (first)
102. Assistant driller for production and exploration drilling of oil and gas wells (second)
103. Drilling mud maker engaged in manual preparation of mud
104. Drilling rig maintenance mechanic, directly employed on drilling rigs
105. A mechanic repairing drilling equipment
106. Tool joint installer
107. Electrician for drilling rig maintenance
VIII. OIL AND GAS PRODUCTION108. Driller overhaul wells
109. Driller of a floating drilling unit at sea
110. Operator of a steam mobile dewaxing unit
111. Mobile compressor operator
112. Lift operator
113. Washing unit operator
114. Hydraulic fracturing operator
115. Operator for preparing wells for major and underground repairs
116. Underground well repair operator
117. Well chemical treatment operator
118. Assistant driller for major workover of wells
119. Assistant driller of a floating drilling unit at sea
120. Workers, managers and specialists constantly engaged in underground oil production
121. Mechanic for installation and repair of foundations of offshore drilling rigs and racks
122. Repairman engaged in installation and maintenance of process equipment and repair of oilfield equipment
123. Electrician for the repair and maintenance of electrical equipment, engaged in the maintenance and repair of technological equipment
IX. FERROUS METALLURGY124. Ladle worker working with molten metal
125. Metal heater engaged in work in methodical, chamber furnaces and wells of rolling and pipe production
126. Processor of surface defects of metal, engaged in work with pneumatic tools
Blast furnace production
Work performed by profession:
127. Top blast furnace
128. Blast Furnace Plumber
129. Blast furnace hearth
130. Operator of scale car
131. Skipova
Steelmaking
Work performed by profession:
132. Filling machine operator
133. Mixerova
134. Block stuffer
135. Furnace reduction of iron and annealing of iron powders
136. Melter of deoxidizers
137. Converter steelmaker's helper
138. Helper of the open-hearth furnace steelmaker
139. Helper of a steelmaker at an electroslag remelting installation
140. Electric furnace steelmaker's helper
141. Steel pourer
142. Converter steelmaker
143. Open hearth furnace steelmaker
144. Steelmaker of electroslag remelting plant
145. Electric furnace steelmaker
Rolling production
Work performed by profession:
146. Hot rolling mill roller
147. Pitch cook
148. Hot rolling mill operator's helper
149. Presser-stitcher of rail fastenings
150. Fitter-wire worker engaged in long-rolling production
Pipe production
Work performed by profession:
151. Calibrating mill roller
152. Roller of a hot pipe rolling mill
153. Roller of a furnace pipe welding mill
154. Roller of a cold pipe rolling mill
155. Roller of a pipe forming mill
156. Pipe drawer employed in non-mechanized mills
157. Pipe calibrator on a press
158. Blacksmith on hammers and presses
159. Helper of a rolling mill for hot rolling of pipes
160. Helper of the roller of a cold pipe rolling mill
Ferroalloy production
Work performed by profession and certain categories of workers:
161. Forge of ferroalloy furnaces
162. Melter engaged in melting and granulating molten vanadium pentoxide
163. Ferroalloy smelter
164. Workers engaged in the smelting of silicon alloys in open arc furnaces
165. Workers engaged in the production of metal chromium and chromium-containing alloys by an aluminothermic method
Coke production
166. Work related to direct employment in the production of benzene, its hydrotreating and rectification. Work performed by profession:
167. Barilletchik
168. Door
169. Crusher
170. Luke
171. Scrubber-pumper engaged in servicing the phenol installation in the coking products recovery shop
172. Repairman servicing coke oven batteries
X. NON-FERROUS METALLURGYWork performed in general professions:
173. Anode pourer engaged in pouring anode bottom sections in the production of aluminum, silumin and silicon
174. Installer repairing bathtubs, engaged in drilling a recess for the cathode rod in the production of aluminum, silumin and silicon
175. Melter
176. Calcifier
177. Repairman, electrician for the repair and maintenance of electrical equipment, employed in the main metallurgical shops
178. Sinterer
179. A charger working at furnaces in the production of tin
Production of non-ferrous and rare metals, production of non-ferrous metal powders
180. Work performed by workers and craftsmen employed in workshops (departments and areas) for the production of titanium tetrachloride (tetrachloride)
181. Work performed by workers and craftsmen employed in the loparite concentrate chlorination shops
182. Work performed by workers and craftsmen employed in workshops (departments and areas) for the recovery of tetrachloride and metal separation in the production of titanium metal
183. Work performed by workers and craftsmen employed in departments (areas) of chlorination and rectification of titanium raw materials (slag)
184. Work performed by workers employed in the department of slag processing by sublimation at a fuming installation in tin production
185. Work performed by workers employed in smelting shops, as well as in the processing of cinders in the production of mercury Work performed by profession:
186. Anode operator in aluminum production
187. Titanium sponge knocker
188. Metal pourer
189. Cathode
190. Converter
191. Capacitor
192. Installer of reaction apparatuses, engaged in the installation and dismantling of baths and furnaces, in the repair and restoration of reaction apparatuses
193. Mercury chopper
194. Pechevoy in the production of zinc dust
195. Pechevoy on Welzkilns
196. Pechevoy on the recovery and distillation of titanium and rare metals
197. Furnace for the recovery of nickel powder
198. Furnace for processing titanium-containing and rare earth materials
199. Electrolyte bath slurry worker cleaning baths manually
200. Molten salt electrolyser
Pressure processing of non-ferrous metals
201. Work performed by a hot metal roller engaged in rolling non-ferrous metals and their alloys
Aluminum production by electrolytic method
202. Work performed by workers and craftsmen
Alumina production
203. Work performed by a loader operator engaged in repair work in hard-to-reach places of pneumatic and hydraulic loaders
XI. REPAIR OF EQUIPMENT OF POWER PLANTS AND NETWORKSWork performed by profession:
204. Electrician for repair of overhead power lines, engaged in steeplejack work repairing high-voltage power lines
205. Electrician for the repair and installation of cable lines, engaged in the repair of cable glands with lead litharge and soldering of lead cable couplings and sheaths
XII. PRODUCTION OF ABRASIVESWork performed by profession:
206. Balancer-pouring abrasive wheels, busy pouring abrasive products with lead
207. Bulldozer operator engaged in hot dismantling of resistance furnaces in the production of abrasives
208. Melter of abrasive materials
209. Podina worker employed in the corundum workshop
210. Resistance furnace dismantler employed in the silicon carbide production shop
XIII. ELECTRICAL PRODUCTIONWork performed in general professions:
211. Mercury distiller
212. Mercury rectifier molder performing work with open mercury
Electrocoal production
213. Work performed by workers on pitch smelting
Cable production
Work performed by profession:
214. Lead or aluminum cable crimper engaged in hot lead crimping
215. Remover of sheaths from cable products, engaged in removing only lead sheaths
Production of chemical power sources
Work performed by profession:
216. Foundry worker of lead alloy products
217. Dry mass mixer (for lead batteries)
218. Melter of lead alloys
219. Battery plate cutter engaged in stamping and separating formed lead plates
XIV. RADIO AND ELECTRONIC PRODUCTIONWork performed by profession:
220. Tester of parts and devices engaged in testing o o
devices in thermal pressure chambers at a temperature of +28 C and above and -60 C and below, subject to direct presence in them
221. Caster of magnets on crystallizer furnaces
222. Melter of shopalloy and bismuth
XV. AIRCRAFT PRODUCTION AND REPAIRWork performed by profession:
223. A mechanic for repairing aircraft engines and a mechanic for repairing units engaged in the repair of engines and units running on leaded gasoline
XVI. SHIPBUILDING AND SHIP REPAIRWork performed by profession:
224. Reinforcement worker of reinforced concrete ships, working on vibrating tables, vibrating platforms, cassette installations and with manual vibrators
225. Ship bender engaged in hot bending
226. Boilermaker
227. Painter, ship insulator, engaged in painting work in tanks, second bottom areas, warm boxes and other hard-to-reach areas of ships, as well as in work on cleaning old paint in these areas of ships
228. Coppermaker for the manufacture of ship products, engaged in hot work
229. Ship carpenter working in closed compartments of ships
230. Workers of the commissioning team at mooring, factory and state tests
231. A ship's hewer engaged in work with hand-held pneumatic tools
232. An assembler of metal ship hulls, engaged in sectional, block and slipway assembly of surface vessels with constant combination of his work with electric tack, gas cutting and metal processing with hand pneumatic tools, as well as in ship repair
233. Mechanical mechanic for testing installations and equipment, engaged in adjusting and testing marine diesel engines in indoors and inside ships
234. Ship fitter, engaged in installation inside ships during repairs
235. Ship repairman engaged in work inside ships
236. Shipbuilder-repairman
237. Ship rigger
238. Ship's pipefitter
ХVII. CHEMICAL PRODUCTIONWork performed in chemical production by profession and certain categories of workers:
239. Melting operator engaged in smelting and refining pitch
240. Steamer engaged in tearing and steaming rubber
Production of inorganic products
Calcium carbide production
241. Workers, shift managers and specialists employed in furnaces and manual crushing of carbide
Phosgene production
242. Workers, shift managers and specialists employed in technological stages
Production of mercury and its compounds
243. Workers, shift managers and specialists engaged in technological stages, except for remotely controlled production
Production of yellow phosphorus
244. Workers, shift managers and specialists directly involved in the maintenance of mine slot furnaces, roasting and sintering furnaces, fines granulation plants, in phosphorus electric sublimation departments, in the filling of phosphorus tanks, in the maintenance of phosphorus storage tanks, phosphorus sludge, sludge distillation and in the processing of fire-liquids slag
Production of phosphorus trichloride and phosphorus pentasulphide
245. Workers, shift managers and specialists engaged in technological stages
Production of chlorine using the mercury method
246. Workers engaged in technological stages
Production of liquid chlorine and chlorine dioxide
247. Workers engaged in technological stages
Carbon disulfide production
248. Workers, shift managers and specialists employed in the retort and condensation departments
Work with fluorine, hydrogen fluoride and fluorides
249. Workers, managers and specialists (except for work performed in laboratories using hydrofluoric acid and fluorides)
Production of arsenic and arsenic compounds
250. Workers, shift managers and specialists engaged in technological stages
Production of silicon tetrachloride
251. Workers, shift managers and specialists engaged in technological stages
Production of technical iodine
252. Workers engaged in squeezing iodine
Production of organic products
Production of benzatron and its chlorine and bromine derivatives, vilontron
253. Workers, shift managers and specialists engaged in technological stages
Production of aniline, paranitroaniline, aniline salts and fluxes
254. Workers, shift managers and specialists engaged in technological stages
Production of benzidine and its analogues
255. Workers, managers, specialists and other employees employed directly in production and at the dissolution station of these products
Production of carbon tetrachloride, golovax, rematol,
256. Workers, shift managers and specialists engaged in technological stages
Production of chloropicrin
257. Workers, shift managers and specialists engaged in technological stages
Production of catalysts containing arsenic
258. Workers, shift managers and specialists engaged in technological stages
Production of ziram, mercury- and arsenic-containing pesticides
259. Workers, shift managers and specialists engaged in technological stages
Chloroprene production
260. Workers, shift managers and specialists engaged in technological stages
Production of chloroprene rubber and latex
261. Workers involved in the technological stages of polymerization and product separation
Production of ethyl liquid
262. Workers, managers and specialists engaged in technological stages
Production of benzene, toluene, xylene
263. Workers, shift managers and specialists engaged in technological stages
Paint and varnish production
Production of lead litharge and red lead, lead crowns, whitewash,
lead green and jurmedweed
264. Workers, shift managers and specialists engaged in technological stages
Production of chemical fibers and threads
265. Regeneration operator engaged in the regeneration of carbon disulfide
Production of fiberglass-based products
synthetic resins (phenol-formaldehyde,
epoxy, polyester unsaturated resins)
266. Operators engaged in contact molding of large-sized products with an area of 1.5 square meters. m or more
Production of medicines, medical, biological
drugs and materials
Antibiotic production
267. Filtration operator engaged in manual disassembly and assembly of filter presses with frame sizes larger than 500 mm
Extracting morphine from raw opium
268. Filtration operator engaged in manual disassembly and assembly of filter presses with frame sizes larger than 500 mm
Androgen production
269. Operator for the production of synthetic hormones, engaged in the production of testosterone preparations and its derivatives
ХVIII. PRODUCTION AND PROCESSING OF RUBBER COMPOUNDSWork performed by profession:
270. Vulcanizer engaged in loading and unloading products in boilers over 6 meters long, vulcanizing propeller shafts
271. Rubber mixer operator
272. Workers employed in the departments: cold vulcanization, production of radol and facts
273. Repairer of rubber products, engaged in the manufacture and repair of large rubber parts and products, vulcanization of reinforced parts (large tires, rubber fuel tanks, reservoirs, conveyor belts, etc.)
Production, retreading and repair of tires
274. Work performed by a vulcanizer, tire collector (heavy duty)
XIX. PROCESSING OF OIL, GAS, SHALE AND COAL, PRODUCTION OF SYNTHETIC PETROLEUM PRODUCTS, PETROLEUM OILS AND LUBRICANTSWork performed by profession and certain categories of workers:
275. Coke cleaner
276. Coke unloader
277. Workers, shift managers and specialists employed in gasoline leaded process plants
278. Workers employed in extraction shops and departments of aromatic hydrocarbons production
279. Workers engaged in the preparation of arsenic solutions for the purification of sulfur-containing petroleum gas
XX. LOGGING AND LOGGINGLogging work
280. Loading and unloading of round timber (except for pulpwood, mine stand and firewood up to 2 meters long)
281. Stacking of round timber (with the exception of pulpwood, mine stand and firewood up to 2 meters long) Work performed by profession:
282. Forest feller
283. A lumberjack engaged in felling, bucking logs and hilling logs, chopping firewood, harvesting and cutting tar resin, as well as harvesting wood using hand tools
284. Timber piler, engaged in the creation of inter-operational and seasonal reserves of logs and trees, loading trees, logs and round timber (with the exception of pulpwood, mine stands and firewood up to 2 meters long) onto timber rolling stock and unloading them, performing the work manually
285. Chokerer
Timber rafting
Work performed by profession:
286. Raftsman
287. Rigger engaged in loading and unloading rigging
288. Raft shaper
XXI. PRODUCTION OF CELLULOSE, PAPER, CARDBOARD AND PRODUCTS FROM THEMWork performed by profession:
289. Cooking operator chemical solutions occupied with dissolving chlorine
290. Impregnation operator engaged in the production of anti-corrosion and inhibited paper
291. Cooker of fibrous raw materials
292. Pulp cook
293. Woodpair
294. Pyrite crusher
295. Loader of balances into defibrators
296. Loader of pyrites, sulfur furnaces and turmas
297. Sulphate loader
298. Acid
299. Mixer
300. Acid tank liner
301. Fiber sawmill
302. Impregnator of paper and paper products, engaged in fiber impregnation
303. Sulfurous acid regenerator
304. Repairman, lubricator, cleaner of production and office premises, electrician for repair and maintenance of electrical equipment, employed in the production of sulfite cellulose and sulfurous acid
305. Sodaman
306. Paper (board) machine dryer, employed on high-speed paper and board machines operating at speeds of 400 or more meters per minute
307. Chlorine man
XXII. CEMENT PRODUCTION308. Work performed by workers cleaning sludge pools and talkers
XXIII. STONE PROCESSING AND PRODUCTION OF STONE CASTING PRODUCTSWork performed by profession:
309. Stone casting pourer
310. Stonemaker
311. Stonecutter
312. Mill operator busy breaking diabase crushed stone into powder
313. Stone processing equipment operator
314. Stone sawyer
315. Stone miller
XXIV. PRODUCTION OF REINFORCED CONCRETE AND CONCRETE PRODUCTS AND STRUCTURES316. Work as a carver of concrete and reinforced concrete products
XXV. PRODUCTION OF THERMAL INSULATION MATERIALSWork performed by profession:
317. Bitumen worker
318. Cupola maker
XXVI. PRODUCTION OF SOFT ROOF AND WATERPROOFING MATERIALS319. Work performed by the digester loader
XXVII. PRODUCTION OF GLASS AND GLASS PRODUCTSWork performed by profession:
320. Quartz blower (except for those engaged in the manufacture of products with a diameter of up to 100 mm and a wall thickness of up to 3 mm)
321. Quartz smelter
322. Mirror dyer working with mercury
323. Batch compiler engaged in manual work using red lead
324. Halmovschik
XXVIII. TEXTILE AND LIGHT INDUSTRYWork performed in general textile manufacturing professions:
325. Sizing equipment operator engaged in non-mechanized lifting and removal of rollers
326. Plumber cleaning sewer trenches and wells
Primary processing of cotton
327. Work as a press operator
Hemp and jute production
328. Work as a fiber preparer engaged in breaking bales of jute
Wool production
Work performed by profession:
329. Washer of technical cloths
330. Assistant foreman employed in a weaving workshop in the production of cloth
Fulling and felt production
Work performed by profession:
331. Fuller engaged in the production of dense felts
332. Shoe fitter engaged in manual work
333. Shoe remover from lasts, engaged in removing felted shoes by hand
Tanning and leather production
335. Transportation, unloading and loading of large leather raw materials and semi-finished products manually in the soaking and ash shops of leather factories Work performed by profession:
336. A skinner engaged in turning large leathers on blocks by hand, in the fleshing and breaking of large leather raw materials
337. Leather roller engaged in rolling large and hard leathers on rollers
338. Leather cutter
339. Sorter of products, semi-finished products and materials, engaged in sorting large leather raw materials
340. Cleaner of products, semi-finished products and materials, engaged in cleaning large leathers and large leather raw materials on blocks by hand
Production of leather shoes
341. Work as a molder of parts and products, working on Anklepf type machines
XXIX. FOOD INDUSTRY342. Baling waste from corrugated packaging production Works performed in general professions in food production:
343. Diffusion operator servicing periodic diffusers when loading manually
344. Ice harvester, engaged in collecting ice in reservoirs and laying it in piles
345. Bone charcoal manufacturer 346. Cleaning machine operator dismantling separators manually
Production of meat products
Work performed by profession:
347. Livestock fighter engaged in operations of stunning, picking up, bleeding large and small cattle and pigs; evisceration, manual removal of cattle hides; sawing up carcasses; scalds and scorches of pork carcasses and heads; horizontal processing of cattle carcasses
348. Skin peeler
349. Skin processor
Fish extraction and processing
350. All types of work on fishing, search and reception and transport sea vessels, with the exception of sea floating crab canneries, fish processing bases, large freezing fishing trawlers and refrigerated sea vessels, where women’s labor is allowed in all jobs, excluding jobs (professions, positions) , specified in sections XXXII "Maritime transport" and XXXIII "River transport" of this list
351. Manually turning barrels of fish Works performed by profession:
352. Loader-unloader of food products, engaged in loading grates with canned food into autoclaves manually
353. Processor of sea animals, engaged in fleshing the skins of sea animals
354. A fish processor engaged in pouring and unloading fish manually from vats, chests, ships, slots and other navigable containers; mixing fish in salting vats by hand
355. Presser-squeezer of food products, engaged in pressing (squeezing) fish in barrels by hand
356. Receiver of watercraft
357. Coastal fisherman engaged in manual hauling of cast nets, ice fishing on cast nets, set nets and vents
Bakery production
358. Work performed by a dough handler working on dough mixing machines with rolling bowls with a capacity of over 330 liters when moving them manually
Tobacco-shag and fermentation production
359. Work performed by an auxiliary worker engaged in transporting bales of tobacco
Perfume and cosmetic production
360. Work performed by a worker engaged in grinding amidochloric mercury
Extraction and production of table salt
Work performed by profession:
361. Salt piler in swimming pools
362. Pool preparer
363. Track worker on the lake
XXX. RAILWAY TRANSPORT AND METROPOLITANWork performed by profession and certain categories of workers:
364. Battery worker repairing lead batteries
365. A handcar driver and his assistant working on broad gauge railway lines
366. Freight train conductor
367. Fireman of steam locomotives in the depot
368. Diesel train driver and his assistant
369. A locomotive driver and his assistant working on broad gauge railway lines
370. Locomotive driver and his assistant
371. Diesel locomotive driver and his assistant
372. Traction unit operator and his assistant
373. Electric locomotive driver and his assistant
374. Electric train driver and his assistant
375. Track fitter (if the established norms of maximum permissible loads for women when lifting and moving heavy objects manually are exceeded)
376. Porter engaged in moving luggage and hand luggage
377. Inspector-repairer of wagons
378. Pipe puncher-blower
379. Conductor for escorting cargo and special wagons, engaged in escorting cargo on open rolling stock
380. Locomotive boiler cleaner
381. Impregnator of lumber and wood products, engaged in impregnation using oil antiseptics
382. Car speed controller
383. A mechanic for the repair of rolling stock, performing the following work: repairing fittings on locomotives while warm washing them; in fire and smoke boxes; for blowing the bottom and gutters of electric rolling stock and diesel locomotives with electric transmission; for disassembling, repairing and assembling drainage devices and safety valves, for inspecting and filling valves for drainage devices in tanks containing petroleum products and chemical products
384. Train compiler, assistant train compiler
385. Contact line electrician working at heights on electrified railways
386. Workers loading asbestos waste, constantly working in the ballast quarry of asbestos waste
XXXI. ROAD TRANSPORTWork performed by profession:
387. A car driver working on a bus with more than 14 seats (except for those employed in intra-factory, intra-city, suburban transportation and transportation in rural areas within one day shift, provided that he is not involved in the maintenance and repair of the bus)
388. A car driver working on a vehicle with a carrying capacity of over 2.5 tons (except for those employed in intra-factory, intra-city, suburban transportation and transportation in rural areas within one day shift, provided that they are not involved in the maintenance and repair of the truck)
389. Automobile repairman manually washing engine parts of a car running on leaded gasoline.
390. A car repair mechanic engaged in running-in an engine using leaded gasoline.
391. Fuel equipment mechanic employed in motor vehicles repairing fuel equipment for carburetor engines running on leaded gasoline.
XXXII. SEA TRANSPORT392. Coastal boatswain, coastal sailor, senior coastal sailor (with the exception of those working at passenger berths of local and suburban lines)
393. Ship fireman and boiler operator engaged in servicing boilers on ships and cranes, regardless of the type of fuel burned in the boilers
394. Cranmaster and his assistant
395. Crane operator (crane operator) working on a floating crane and his assistant
396. Engine command staff (mechanics, electromechanics and others) and engine crew (machinists, mechanics, electricians, turners and mechanics of all types and others) of ships of all types of fleet
397. Deck crew (boatswain, skipper, mate and sailors of all types) of ships of all types of fleet, as well as floating cleaning stations, docks, floating reloaders of grain, cement, coal and other dust-generating cargo
398. Workers of complex teams and loaders engaged in loading and unloading operations in ports and piers
399. Crew members of all types of fleet, combining work in two positions of deck and engine personnel
XXXIII. RIVER TRANSPORTWork performed by profession and position:
400. Loaders, dockers-mechanists (except for dockers-mechanists who constantly work as crane operators, drivers of intra-port transport and workers servicing machines and continuous mechanisms for cargo processing, with the exception of substances belonging to hazard classes 1 and 2)
401. Ship stoker employed on ships operating on solid fuel
402. Sailors of all types of passenger and cargo-passenger ships (except for hydrofoil and planing ships, as well as ships operating on intracity and suburban lines), dredgers, dredgers and mixed river-sea navigation vessels
403. Crane operator (crane operator) working on a floating crane
404. Engine crew of ships of all types of fleet, as well as crew members of ships of all types of fleet, combining work in two positions of deck and engine personnel
XXXIV. CIVIL AVIATIONWork performed by profession and certain categories of workers:
405. Aviation mechanic (technician) for airframe and engines, aviation mechanic (technician) for instruments and electrical equipment, aviation mechanic (technician) for radio equipment, aviation technician (mechanic) for parachute and rescue equipment, aviation technician for fuels and lubricants , engineer directly involved in the maintenance of aircraft (helicopters)
406. Porter engaged in moving baggage and hand luggage at airports
407. Gas station operator busy refueling aircraft leaded gasoline, as well as refueling special vehicles with leaded gasoline
408. Workers engaged in cleaning and repairing the inside of gas turbine aircraft fuel tanks
409. Workers engaged in the preparation of bitumen and repair of runways and taxiways (filling joints) at airfields
XXXV. CONNECTION410. Operational and technical maintenance of radio equipment and communication equipment on high-rise buildings (towers, masts) over 10 m high, not equipped with elevators
XXXVI. PRINTING PRODUCTION419. Performing operations in crop production, livestock farming, poultry farming and fur farming using pesticides, pesticides and disinfectants (under the age of 35)
420. Maintenance of stud bulls, stud stallions, boars
421. Loading and unloading of animal corpses, confiscated goods and pathological material
422. Work in wells, slurry tanks and tanks, silos and haylage towers
423. Work as tractor drivers in agricultural production
424. Working as truck drivers
425. Removing skins from the corpses of cattle, horses and cutting up carcasses
426. Transportation, loading and unloading of pesticides
427. Laying drainage pipes manually
XXXIX. WORK PERFORMED IN VARIOUS SECTORS OF THE ECONOMY428. Cleaning, scraping and painting work in ship and railway tanks, ship liquid fuel tanks and oil tankers, cofferdams, fore- and afterpeaks, chain boxes, double-bottom and double-hull spaces and other hard-to-reach places
429. Painting work using lead white, lead sulfate or other compositions containing these dyes
430. Installation, repair and maintenance of contact networks, as well as overhead power lines when working at a height of over 10 m
431. Direct fire extinguishing
432. Maintenance of floating craft, dredgers with ship rigging work
433. Cleaning of containers (tanks, measuring tanks, tanks, barges, etc.) from sour oil, products of its processing and sulfur-containing petroleum gas
434. Work with metallic mercury in open form (except for workers employed in installations and semi-automatic machines, where effective air exchange in the workplace is ensured)
435. Mixing gasoline with ethyl liquid
436. Cleaning of mercury rectifiers Work performed by profession:
437. Antenna-mast operator
438. Bitumen cooker
439. Snowmobile driver
440. Diver
441. Gas rescuer
442. Mercury dispenser engaged in dosing open mercury manually
443. Wood splitter engaged in manual work
444. Boilermaker repairing hot boilers
445. Boiler cleaner
446. A painter engaged in preparing lead paints by hand
447. Painter engaged in painting inside containers using paints and varnishes containing lead, aromatic and chlorinated hydrocarbons, as well as painting large-sized products in closed chambers with a spray gun using the same paints and varnishes
448. Crane operator (crane operator) busy working at sea
449. A driver (stoker) of a boiler house engaged in servicing steam and hot water boilers when loading manually with a consumption per change of solid mineral and peat fuel per driver (stoker) exceeding established standards maximum permissible loads for women when lifting and moving heavy objects manually
450. Paratrooper (paratrooper-firefighter)
451. Workers of the engine crew of floating cranes
452. Grinder engaged in grinding pitch
453. Repairman of artificial structures
454. Emergency repair mechanic engaged in cleaning the sewerage network
455. Rigger engaged in installation and dismantling of equipment
456. A cleaner engaged in cleaning pipes, furnaces and flues
Notes:
1. An employer may decide to employ women in jobs (professions, positions) included in this list, subject to the creation of safe working conditions, confirmed by the results of certification of workplaces, with a positive conclusion of the state examination of working conditions and the state sanitary and epidemiological inspection service of a constituent entity of the Russian Federation.
2. List of positions of managers, specialists and other workers related to underground work, in which, as an exception, the use of female labor is permitted:
general director, director, chief, technical director, manager, chief engineer of mines and mines for the extraction of coal, ore and non-metallic minerals by underground methods, for the construction of subways, tunnels, mine construction and mine tunneling departments, construction and construction and installation departments and construction and other underground structures, their deputies and assistants;
chief, chief engineer of mining workshops and sections, their deputies and assistants;
senior engineer, engineer, technician, other managers, specialists and employees who do not perform physical work;
engineer, technician, laboratory assistant, other specialists and employees who do not perform physical work and do not permanently stay underground;
chief surveyor, senior surveyor, mine surveyor, mine surveyor; chief geologist, chief hydrogeologist, chief hydrologist, mine, mine geologist, geologist, mine, mine hydrogeologist, hydrogeologist, hydrologist;
workers servicing stationary mechanisms that have automatic start and stop, and who do not perform other work related to physical activity;
workers undergoing training and admitted to internships in the underground parts of organizations;
employees of scientific and educational institutions, design and engineering organizations;
doctor, paramedical and junior medical personnel, bartender and other workers involved in sanitary and consumer services.
The website “Zakonbase” presents the RF Government DECREE dated 02/25/2000 N 162 “ON APPROVAL OF THE LIST OF HEAVY WORK AND WORK WITH HARMFUL OR DANGEROUS WORKING CONDITIONS, UNDER WHICH THE USE OF WOMEN’S LABOR IS PROHIBITED” in the very latest edition. It is easy to comply with all legal requirements if you read the relevant sections, chapters and articles of this document for 2014. To find the necessary legislative acts on a topic of interest, you should use convenient navigation or advanced search.
On the website "Zakonbase" you will find the Decree of the Government of the Russian Federation dated February 25, 2000 N 162 "ON APPROVAL OF THE LIST OF HEAVY WORK AND WORK WITH HARMFUL OR DANGEROUS WORKING CONDITIONS, IN WHICH PERFORMANCE THE USE OF WOMEN'S LABOR IS PROHIBITED" in the latest and full version, in which all changes and amendments have been made. This guarantees the relevance and reliability of the information.
At the same time, download the Decree of the Government of the Russian Federation of 02.25.2000 N 162 "On approval of the list of heavy work and work with harmful or dangerous working conditions, during which the use of women is prohibited" can be completely free of charge, both completely and individual chapters.
On approval of the list of heavy work and work with harmful or dangerous working conditions, during which the use of women’s labor is prohibited
GOVERNMENT OF THE RUSSIAN FEDERATION RESOLUTION dated February 25, 2000 N 162 Moscow On approval of the list of heavy work and work with harmful or dangerous working conditions, during which the use of women’s labor is prohibited In accordance with Article 10 of the Federal Law “On the Fundamentals of Labor Safety in the Russian Federation” (Collected Legislation of the Russian Federation, 1999, No. 29, Art. 3702) The Government of the Russian Federation decides: To approve the attached list of heavy work and work with harmful or dangerous working conditions, during which the use of women’s labor is prohibited. Chairman of the Government of the Russian Federation V. Putin __________________________ APPROVED by Decree of the Government of the Russian Federation of February 25, 2000 N 162 LIST of heavy work and work with harmful or dangerous working conditions, during which the use of women’s labor is prohibited I. WORK ASSOCIATED WITH LIFTING AND HANDLING HEAVIES MANUALLY 1. Work associated with lifting and moving heavy objects manually, in case of exceeding the established norms of maximum permissible loads for women when lifting and moving heavy objects manually II. UNDERGROUND WORK 2. Underground work in the mining industry and in the construction of underground structures, with the exception of work performed by women holding leadership positions and not performing physical work; women engaged in sanitation and household services; women undergoing training and admitted to internships in the underground parts of the organization; women who must go down from time to time into the underground parts of the organization to perform work of a non-physical nature (the list of positions of managers, specialists and other workers associated with underground work, in which the use of female labor is permitted, as an exception, is given in paragraph 2 of the notes to this list) III. METAL WORKING Foundry work Works performed by profession and certain categories of workers: 3. Cupola worker 4. Casting beater, engaged in manual knocking 5. Charge loader in cupolas and furnaces, busy loading the charge manually 6. Casting welder 7. Metal pourer 8. Chopper, engaged in work with pneumatic tools 9. Melter of metal and alloys 10. Workers engaged in hanging hot castings on a conveyor and servicing and repairing equipment in the tunnels of foundries Welding work Work performed by profession: 11. Gas welder and electric welder of manual welding, working in closed containers (cisterns, boilers, etc.), as well as on high-rise communication structures (towers, masts) over 10 meters and steeplejack work Boiler, cold forming, drawing and pressing work Works performed on professions: 12. Boilermaker 13. Turner on lathe-spinning machines, engaged in manual work 14. Chasser, engaged in work with hand pneumatic tools Press-forging and thermal work Works performed by profession: 15. Bander, engaged in hot work 16. A spring operator engaged in hot work when winding springs from wire with a diameter of over 10 mm 17. A roller engaged in rolling out rings in a hot state 18. A spring operator engaged in hot metal processing Metal coating and painting 19. Sealing inside caisson tanks 20. Constant work on hot lead plating (not galvanic) Mechanical and metalwork-assembly work Works performed by profession: 21. Pneumatic driller, performing work with a pneumatic tool that transmits vibration to the hands of the worker 22. Repairman, engaged in: setting up equipment in workshops and departments: hot-rolling, pickling, enameling, insulation using silicone varnishes, lead plating in cable production; on hot repairs of selenium and shoeing devices (equipment); setting up equipment in workshops and departments for the preparation and use of organosilicon varnishes and varnishes containing 40 or more percent of toluene, xylene; repair of equipment in closed fuel warehouses and oil facilities at thermal power plants, as well as repair of equipment in tunnels and heating chambers in heating networks; maintenance of water jacket furnaces in the production of non-ferrous metals and alloys; adjustment and repair of chill molds in a hot state; directly in the shops: mill, lubricating, forming, foundry, pipe-filling, gleymixing and assembly shops in the production of lead batteries; repair of technological equipment at motor testing stations, running on leaded gasoline and located in boxes Work with lead 23. Smelting, casting, rolling, drawing and stamping of lead products, as well as leading of cables and soldering of lead batteries IV. BUILDING, INSTALLATION AND REPAIR WORK 24. Hot repair of furnaces and boiler furnaces 25. Uprooting stumps 26. Fastening structures and parts using a construction gun 27. Slab-breaking work, dismantling of buildings and structures 28. Punching holes (furrows, niches, etc.) in concrete, reinforced concrete and stone (brick) structures manually and using pneumatic tools Work performed by profession: 29. Armature worker engaged in manual installation frames, manual, bending machines and scissors 30. Asphalt concrete worker, asphalt concrete welder, working manually 31. Hydraulic monitor 32. Excavator, engaged in digging wells 33. Bricklayer, engaged in laying modular solid sand-lime bricks 34. Roofer on steel roofs 35. Caisson operator, caisson operator, caisson mechanic, caisson electrician 36. Motor grader operator 37. Asphalt operator, pit driver 38. Concrete pump operator, mobile bitumen melting unit operator 39. Bulldozer operator 40. Grader elevator operator 41. Operator of a mobile asphalt concrete mixer 42. Operator of an asphalt concrete paver 43. Operator of a single-bucket excavator, operator of a rotary excavator (ditch digger and trencher) 44. Operator of a mobile electric welding unit with an internal combustion engine 45. Operator of a mobile power station, working at a power station with an internal combustion engine with a capacity of 150 hp. With. and more 46. Communications installer - antenna operator engaged in work at heights 47. Installer for the installation of steel and reinforced concrete structures when working at heights and steeplejack work 48. Lead solderer (lead soldering worker) 49. Carpenter 50. Plumber engaged in sewer repair networks 51. Pipe-laying of industrial reinforced concrete pipes 52. Pipe-laying of industrial brick pipes V. MINING Open-pit mining and the surface of existing and under construction mines and mines, enrichment, agglomeration, briquetting Works performed in the general professions of mining and capital works: 53. Blast-hole driller 54 Blasting operator, master blaster 55. Miner for fire prevention and extinguishing 56. Delivery of fastening materials to the mine 57. Fastener 58. Blacksmith-driller 59. Drilling rig operator 60. Loading machine operator 61. Full-section mine shaft drilling operator 62 . Excavator operator 63. Tipper, engaged in manual rolling and rolling of trolleys 64. Miner, engaged in feeding trolleys into cages manually 66. Cleaner, engaged in cleaning bins 67. Electrical fitter (fitter) on duty and equipment repair, engaged in maintenance and repair. equipment, mechanisms, water and air lines in mining operations Work performed in the general professions of beneficiation, agglomeration, briquetting and certain categories of workers: 68. A crusher engaged in crushing hot pitch in the production of alumina 69. A roaster engaged in conducting the process of roasting raw materials and materials in the production of mercury 70. Workers and foremen of processing and crushing and screening factories, mines, mines and metallurgical enterprises engaged in crushing and grinding work , grinding and mixing of ores of ferrous, non-ferrous and rare metals, fluorspar and coal, which generate dust containing 10 percent or more free silicon dioxide when performing work manually 71. Workers employed in lead enrichment shops 72. Workers and foremen, employed in the enrichment of niobium (loparite) ores Construction of subways, tunnels and underground structures for special purposes Works performed by profession: 73. Installer of mining equipment 74. Miner in surface work Mining of ores Works performed by profession: 75. Miner of alluvial deposits 76. Chisel operator 77. Drager 78. Dredge sailor 79. Dredge operator 80. Jet plant operator Extraction and processing of peat Works performed by profession: 81. Ditcher 82. Rooter 83. Operator of machines for the extraction and processing of lump peat 84. Operator of machines for the preparation of peat deposits for operation 85. Operator of a peat excavator 86. Peat worker engaged in felling trees, laying peat bricks Processing of brown coal and ozokerite ores Work performed by profession: 87. Operator for the production of rock wax 88. Operator for the production of ozokerite and ozokerite products 89. Crusher 90 Briquette press operator 91. Filling machine operator VI. GEOLOGICAL EXPLORATION AND TOPOGRAPHIC-GEODETIC WORKS Works performed by profession: 92. Blasting operator, master blaster 93. Installer of geodetic signs 94. Electrical mechanic (fitter) on duty and equipment repairer, employed in the field VII. WELL DRILLING Works performed by profession: 95. Driller for production and exploration drilling of oil and gas wells 96. Derrick erector, derrick-welder, derrick-electrician 97. Drilling rig operator 98. Well cementing operator 99. Cementing unit operator, cement mechanic -sand mixing unit 100. Pipe pressure tester 101. Assistant driller for production and exploration drilling of oil and gas wells (first) 102. Assistant driller for production and exploration drilling of oil and gas wells (second) 103. Preparation of drilling fluid, engaged in the preparation of the solution manually 104. Fitter for servicing drilling rigs, directly employed at drilling rigs 105. Repairman, engaged in the repair of drilling equipment 106. Installer of drill joints 107. Electrician for servicing drilling rigs VIII. OIL AND GAS PRODUCTION Work performed by profession and certain categories of workers: 108. Well workover driller 109. Driller of a floating drilling unit at sea 110. Operator of a mobile steam dewaxing unit 111. Operator of a mobile compressor 112. Operator of a lift 113. Operator of a washing unit 114 Operator for hydraulic fracturing 115. Operator for preparing wells for capital and underground repairs 116. Operator for underground repairs of wells 117. Operator for chemical treatment of wells 118. Assistant driller for capital repairs of wells 119. Assistant driller for a floating drilling unit at sea 120. Workers , managers and specialists constantly engaged in underground oil production 121. Fitter for the installation and repair of the foundations of offshore drilling rigs and racks 122. A repairman engaged in the installation and maintenance of process equipment and repair of oilfield equipment 123. An electrician for the repair and maintenance of electrical equipment, engaged in the maintenance and repair of technological equipment IX. FERROUS METALLURGY Works performed in general professions: 124. Ladle worker, working with molten metal 125. Metal heater, working in methodical, chamber furnaces and wells of rolling and pipe production 126. Processor of surface defects of metal, working with pneumatic tools Blast furnace production Works performed by profession: 127. Top blast furnace 128. Blast furnace plumber 129. Blast furnace forge 130. Scale car operator 131. Skip Steelmaking Works performed by profession: 132. Charging machine operator 133. Mikserova 134. Block stuffer 135. Iron recovery furnace and annealing of iron powders 136. Deoxidizer melter 137. Converter steelmaker's helper 138. Open hearth furnace steelmaker's helper 139. Steelmaker's helper for electroslag remelting installation 140. Electric furnace steelmaker's helper 141. Steel caster 142. Converter steelmaker 143. open hearth var furnaces 144. Steelmaker of electroslag remelting installation 145. Electric furnace steelmaker Rolling production Works performed by profession: 146. Hot rolling mill roller 147. Pitch cooker 148. Helper of hot rolling mill roller 149. Presser-stitcher of rail fastenings 150. Fitter-wire worker employed in section rolling production Pipe production Works performed by professions: 151. Roller of a calibration mill 152. Roller of a hot rolling mill for pipes 153. Roller of a furnace pipe welding mill 154. Roller of a cold rolling mill of pipes 155. Roller of a pipe forming mill 156. Pipe drawing operator employed in non-mechanized mills 157. Pipe calibrator on a press 1 58. Blacksmith on hammers and presses 159. Helper of a roller of a hot rolling mill for pipes 160. Helper of a roller of a cold rolling mill of pipes Ferroalloy production Works performed by profession and certain categories of workers: 161. Miner of ferroalloy furnaces 162. Smelter engaged in melting and granulating molten vanadium pentoxide 163. Ferroalloy smelter 164. Workers involved in the smelting of silicon alloys in open arc furnaces 165. Workers involved in the production of metal chromium and chromium-containing alloys by an aluminothermic method Coke production 166. Work associated with direct employment in the production of benzene, its hydrotreating and rectification Works performed by profession: 167. Bariller 168. Door 169. Crusher 170. Hatch 171. Scrubber-pumper engaged in servicing the phenol installation in the coking product recovery shop 172. Repairman engaged in servicing coke oven batteries X. NON-FERROUS METALLURGY Works performed in general professions : 173. Anode pourer, engaged in pouring bottom sections of anodes in the production of aluminum, silumin and silicon 174. Installer in the repair of bathtubs, engaged in drilling a recess for the cathode rod in the production of aluminum, silumin and silicon 175. Melter 176. Calciner 177. Mechanic - repairman, electrician for the repair and maintenance of electrical equipment, employed in the main metallurgical shops 178. Sinterer 179. Shearer, engaged in work at furnaces in the production of tin Production of non-ferrous and rare metals, production of powders from non-ferrous metals 180. Work performed by workers and craftsmen engaged in workshops (departments and sections) for the production of titanium tetrachloride (tetrachloride) 181. Work performed by workers and craftsmen employed in the chlorination shops of loparite concentrate 182. Work performed by workers and craftsmen employed in shops (departments and areas) for the recovery of tetrachloride and metal separation in the production of titanium metal 183. Work performed by workers and craftsmen employed in departments (sections) of chlorination and rectification of titanium raw materials (slag) 184. Work performed by workers engaged in the slag processing department by sublimation at a fuming installation in tin production 185. Work performed by workers employed in smelting shops, as well as in the processing of cinders in the production of mercury Work performed by profession: 186. Anodist in aluminum production 187 . Titanium sponge beater 188. Metal pourer 189. Cathode operator 190. Converter operator 191. Condenser operator 192. Reaction apparatus installer, engaged in the installation and dismantling of baths and furnaces, in the repair and restoration of reaction apparatuses 193. Mercury beater 194. Furnace worker in the production of zinc dust 195. Kiln worker on Welz furnaces 196. Kiln worker for the reduction and distillation of titanium and rare metals 197. Kiln worker for the recovery of nickel powder 198. Kiln worker for the processing of titanium-containing and rare earth materials 199. Slurry operator of electrolyte baths, engaged in manual cleaning of baths 200. Electrolytic molten salts Processing non-ferrous metals under pressure 201. Work performed by a hot metal roller engaged in rolling non-ferrous metals and their alloys Production of aluminum by the electrolytic method 202. Work performed by workers and craftsmen Production of alumina 203. Work performed by a loader operator engaged in repair work in hard-to-reach places of pneumatic and hydraulic loaders XI. REPAIR OF EQUIPMENT OF POWER PLANTS AND NETWORKS Work performed by profession: 204. Electrician for repair of overhead lines
Decree of the Government of the Russian Federation dated February 17, 2018 N 162 “On approval of the Rules”
GOVERNMENT OF THE RUSSIAN FEDERATION
RESOLUTION
ABOUT APPROVAL OF THE RULES
EXERCISE OF STATE CONTROL IN THE AREA
ENSURING THE SAFETY OF SIGNIFICANT CRITICAL OBJECTS
INFORMATION INFRASTRUCTURE OF THE RUSSIAN FEDERATION
In accordance with clause 2 of part 2 of article 6 of the Federal Law “On the Security of Critical Information Infrastructure of the Russian Federation”, the Government of the Russian Federation decides:
Approve the attached Rules for the implementation of state control in the field of ensuring the security of significant objects of critical information infrastructure of the Russian Federation.
Chairman of the Government
Russian Federation
D.MEDVEDEV
Approved
Government resolution
Russian Federation
EXERCISE OF STATE CONTROL IN THE AREA
ENSURING THE SAFETY OF SIGNIFICANT CRITICAL OBJECTS
INFORMATION INFRASTRUCTURE OF THE RUSSIAN FEDERATION
1. These Rules establish the procedure for the implementation by the federal executive body authorized in the field of ensuring the security of the critical information infrastructure of the Russian Federation, and its territorial bodies (hereinafter referred to as the state control body) of measures for state control in the field of ensuring the security of significant objects of the critical information infrastructure of the Russian Federation ( hereinafter referred to as critical information infrastructure, state control).
2. State control is carried out in order to verify compliance by subjects of critical information infrastructure, which are entitled to ownership, lease or other legally belong to significant objects of critical information infrastructure, the requirements established by the Federal Law "On the Security of Critical Information Infrastructure of the Russian Federation" and normative regulations adopted in accordance with it legal acts(hereinafter referred to as security requirements, verification).
3. State control is carried out through scheduled and unscheduled on-site inspections.
4. To carry out an inspection, the state control body creates a commission consisting of at least 2 officials. An unscheduled inspection carried out on the basis specified in subparagraph “a” of paragraph 20 of these Rules may be carried out by one official of the state control body.
5. The inspection is carried out by officials of the state control body, who are indicated in the order of the state control body to conduct the inspection.
6. The period for conducting a scheduled inspection should not exceed 20 working days.
7. The duration of an unscheduled inspection should not exceed 10 working days.
8. The period for conducting each of the inspections provided for in paragraph 3 of these Rules in relation to a subject of critical information infrastructure that operates in the territories of several constituent entities of the Russian Federation is established separately for each branch, representative office and separate structural unit of the subject of critical information infrastructure, while the total period for conducting the inspection cannot exceed 60 working days.
9. Inspections of significant objects of critical information infrastructure that are owned, leased or otherwise legally owned by the Ministry of Defense of the Russian Federation, the Foreign Intelligence Service of the Russian Federation, the Federal Security Service of the Russian Federation, the Federal Security Service of the Russian Federation and the Main Directorate of Special Programs of the President of the Russian Federation, as well as significant objects of critical information infrastructure, the protection of which is within their competence, is carried out in agreement with the heads of the specified federal executive authorities.
10. Information about the organization of inspections, including their planning, the conduct and results of such inspections, is not sent to the prosecutor’s office, with the exception of information about the results of inspections carried out on the basis of the prosecutor’s request to carry out an unscheduled inspection as part of supervision over the implementation of laws on materials and appeals received by the prosecutor's office.
II. Organizing a scheduled inspection
11. The subject of a scheduled inspection is compliance by the subject of the critical information infrastructure with security requirements.
12. The grounds for carrying out a scheduled inspection are the expiration of 3 years from the date of:
a) entering information about an object of critical information infrastructure into the register of significant objects of critical information infrastructure;
b) completion of the last scheduled inspection in relation to a significant object of critical information infrastructure.
13. The annual plan for conducting scheduled inspections is approved by the head of the state control body before December 20 of the year preceding the year of conducting scheduled inspections.
14. The annual plan for scheduled inspections contains the following information:
a) information about the subject of critical information infrastructure;
b) information about the person operating a significant object of critical information infrastructure;
c) the date of completion of the last scheduled inspection;
d) month and period of inspection;
e) the basis for the inspection;
f) name of the state control body.
15. Extracts from the approved annual plan for conducting scheduled inspections are sent by the state control body to subjects of critical information infrastructure before January 1 of the year of conducting scheduled inspections.
16. The subject of the critical information infrastructure is notified of the scheduled inspection by the state control body at least 3 working days before the start of the inspection by sending a copy of the order of the state control body to conduct the scheduled inspection by any in an accessible way, providing the opportunity to confirm the fact of such notification.
17. A scheduled inspection is carried out on the basis of an approved annual plan for conducting scheduled inspections and an order from the state control body to conduct an inspection.
18. The order of the state control body to conduct an inspection shall indicate:
a) name of the state control body, number and date of issue of the order;
b) positions, surnames, first names and patronymics of officials of the state control body authorized to conduct the inspection;
c) information about the subject of critical information infrastructure;
d) information about the person operating a significant object of critical information infrastructure;
e) verification tasks;
f) start and end date of the inspection;
g) the period for conducting the inspection;
h) legal grounds for conducting an inspection, including regulatory legal acts, compliance with the provisions of which is subject to inspection;
i) a list of control measures necessary to perform inspection tasks.
III. Organization of an unscheduled inspection
19. The subject of an unscheduled inspection is compliance by the subject of the critical information infrastructure with security requirements, compliance with the instructions of the state control body, as well as taking measures to prevent negative consequences at a significant facility of critical information infrastructure, the cause of which is the occurrence of a computer incident.
20. The grounds for carrying out an unscheduled inspection are:
a) expiration of the deadline for the subject of critical information infrastructure to comply with the order issued by the state control body to eliminate the identified violation of security requirements;
b) the occurrence of a computer incident at a significant facility of critical information infrastructure, resulting in negative consequences;
c) an order of the state control body issued in accordance with the instructions of the President of the Russian Federation or the Government of the Russian Federation or on the basis of the request of the prosecutor to carry out an unscheduled inspection as part of the supervision of the implementation of laws on materials and appeals received by the prosecutor's office.
Advertisement the possibility of confirming the fact of such notification.
22. If an unscheduled inspection is carried out on the basis specified in subparagraph “b” of paragraph 20 of these Rules, the state control body has the right to begin conducting an unscheduled inspection immediately.
23. An unscheduled inspection is carried out on the basis of an order from the state control body to conduct an inspection, issued in accordance with paragraph 18 of these Rules.
IV. Carrying out an inspection
24. Scheduled and unscheduled inspections are carried out at the location of the subject of critical information infrastructure, the person operating a significant object of critical information infrastructure, and a significant object of critical information infrastructure.
25. The inspection begins with the presentation of an official identification by officials of the state control body, mandatory familiarization with the head of the subject of critical information infrastructure or his authorized representative official with an order from the state control body to conduct an inspection.
26. The head of the subject of critical information infrastructure or the official authorized by him is given a copy of the order of the state control body to conduct an inspection, certified by the seal of the state control body, against receipt.
27. The head of a subject of critical information infrastructure or an official authorized by him is obliged to provide officials of the state control body carrying out the inspection with the opportunity to familiarize themselves with documents related to the subject and objectives of the inspection, as well as ensure that they take into account the access control requirements unhindered access conducting inspections of officials on the territory, buildings, structures, structures, premises used in the implementation of activities and significant objects of critical information infrastructure.
28. To assess the effectiveness of measures taken to fulfill security requirements, officials of the state control body use software and hardware-software control tools certified according to information security requirements, including those available to the subject of critical information infrastructure.
The possibility and procedure for using such control means, taking into account the peculiarities of the functioning of a significant object of critical information infrastructure, is agreed upon with the head of the subject of critical information infrastructure or an official authorized by him.
V. Limitations during inspection
29. When conducting an inspection, officials of the state control body do not have the right to:
a) verify compliance with security requirements, if they do not fall within the powers of the state control body on behalf of which these officials act;
b) conduct an inspection if the head of a critical information infrastructure entity or an official authorized by him is absent during the inspection, except for the case of an inspection on the basis specified in subparagraph “b” of paragraph 20 of these Rules;
c) demand the presentation of documents and information if they are not related to the subject of the inspection, as well as seize the originals of such documents;
d) disseminate information obtained as a result of the inspection and constituting state, commercial, official and other secrets protected by law, except for cases provided for by the legislation of the Russian Federation;
e) exceed the established time limits for conducting the inspection;
f) issue instructions or proposals to subjects of critical information infrastructure to carry out control measures at their expense;
g) carry out actions with technical means of information processing, as a result of which the functioning of a significant object of critical information infrastructure may be disrupted and (or) terminated.
VI. Responsibilities of officials of a government agency
control during inspection
30. When conducting an inspection, officials of the state control body are obliged to:
a) promptly and fully fulfill the powers granted in accordance with the legislation of the Russian Federation to prevent, identify and suppress violations of security requirements by a subject of critical information infrastructure;
b) respect the rights and legitimate interests subject of critical information infrastructure, the inspection of which is carried out;
c) conduct an inspection on the basis of an order from the state control body to conduct it in accordance with its subject and objectives;
d) conduct an inspection during the performance of official duties and upon presentation of official identification and a copy of the order of the state control body to conduct an inspection;
e) not prevent the head of the subject of critical information infrastructure or an official authorized by him from being present during the inspection and giving explanations on issues related to the subject of the inspection;
f) provide the head of the critical information infrastructure entity or an official authorized by him who is present during the inspection with information and documents related to the subject of the inspection;
g) acquaint the head of the subject of critical information infrastructure or an official authorized by him with the results of the inspection;
h) comply with the inspection deadlines established by these Rules;
i) not demand from the subject of critical information infrastructure documents and other information, the presentation of which is not provided for by the legislation of the Russian Federation;
j) in the case provided for by the internal regulations of the subject of critical information infrastructure, on the first day of the inspection, undergo instruction on compliance with safety precautions while on the territory where the inspected significant object of critical information infrastructure is located;
k) record the inspection performed in the inspection log, if available.
VII. The procedure for recording the inspection results
31. Based on the results of the inspection, the officials of the state control body conducting the inspection draw up an inspection report.
32. The form of the inspection report is approved by the federal executive body authorized to ensure the security of critical information infrastructure.
33. The inspection report shall indicate:
a) date and place of drawing up the inspection report;
b) name of the state control body;
c) date and number of the order of the state control body to conduct the inspection;
d) duration and place of the inspection;
e) last names, first names, patronymics and positions of the persons conducting the inspection;
f) information about the subject of critical information infrastructure;
g) last name, first name and patronymic of the head of the subject of critical information infrastructure or an official authorized by him who was present during the inspection;
h) information about the person operating a significant object of critical information infrastructure;
i) information about the significant object of critical information infrastructure being inspected;
j) information about the results of the inspection, including any violations of security requirements identified;
k) information about making an entry in the inspection log about the inspection performed or about the impossibility of making such an entry due to the lack of the critical information infrastructure of the specified log at the subject;
m) signatures of officials of the state control body who conducted the inspection;
m) information about familiarization or refusal to familiarize with the inspection report of the head of the subject of critical information infrastructure or an official authorized by him.
34. Based on the inspection report, if a violation of security requirements is detected, the state control body issues an order to the subject of the critical information infrastructure to eliminate the identified violation, indicating the deadline for its elimination.
35. The inspection report is accompanied by protocols or conclusions based on the results of control measures carried out using software and hardware-software control tools, as well as instructions to eliminate identified violations and other documents or copies thereof related to the results of the inspection.
36. The inspection report is drawn up immediately after its completion in 3 copies, one of which with attachments is handed over to the head of the subject of critical information infrastructure or an official authorized by him. The second copy of the inspection report is sent to the federal executive body authorized in the field of ensuring the security of critical information infrastructure, the third - to the territorial body of the federal executive body authorized in the field of ensuring the security of critical information infrastructure that conducted the inspection.
37. In the event of an unscheduled inspection based on the request of the prosecutor to carry out an unscheduled inspection as part of the supervision of the implementation of laws based on materials and appeals received by the prosecutor's office, a copy of the inspection report with copies of attachments is sent to the relevant prosecutor's office.
38. The results of the inspection, containing information constituting state, commercial, official and other secrets protected by law, are formalized in compliance with the requirements provided for by the legislation of the Russian Federation.
VIII. Measures taken by officials of the body
state control regarding violations
safety requirements identified
during an inspection
39. If, during an inspection, a violation of security requirements by a subject of critical information infrastructure is revealed, the officials of the state control body who conducted the inspection, within the powers provided for by the legislation of the Russian Federation, are obliged to:
a) issue an order to the subject of the critical information infrastructure to eliminate the identified violation of security requirements, indicating the period for its elimination, which is established, among other things, taking into account the programs (plans) approved and submitted by the subject of the critical information infrastructure for the modernization (retrofitting) of a significant object of the critical information infrastructure ;
b) take measures to monitor the elimination of the identified violation, its prevention and prevention.
40. If it is impossible to fulfill the order provided for in subparagraph "a" of paragraph 39 of these Rules, for reasons beyond the control of the subject of critical information infrastructure, the head of the state control body, upon receipt of a reasoned appeal by the subject of critical information infrastructure to the state control body, has the right to extend the deadline for fulfilling the specified instructions, but not more than one year, notifying the subject of critical information infrastructure about this within 30 days from the date of registration of the specified appeal.
IX. Responsibility of the state control body
and its officials during the inspection
41. The state control body and its officials, in case of improper performance of functions, official duties, and commission of illegal actions (inaction) during an inspection, are liable in accordance with the legislation of the Russian Federation.
42. The state control body exercises control over the performance of official duties by officials of the state control body, keeps records of cases of improper performance of official duties by officials, conducts appropriate official checks and takes measures in accordance with the legislation of the Russian Federation in relation to such officials.
43. The state control body is obliged to inform in writing the subject of critical information infrastructure, whose rights and (or) legitimate interests are violated, about the measures taken against officials guilty of violating the legislation of the Russian Federation, within 10 days from the date of taking such measures.
X. Invalidity of the results of the inspection carried out
in gross violation of the provisions of these Rules
44. The results of an inspection carried out by a state control body in gross violation of the provisions of these Rules cannot be evidence of a violation by a subject of critical information infrastructure of security requirements and are subject to cancellation by the state control body based on a statement from a subject of critical information infrastructure.
45. Gross violations of the provisions of these Rules include:
a) lack of grounds for conducting an inspection;
b) violation of the deadline for notification of an inspection;
c) violation of the inspection deadline;
d) conducting an inspection without an order from a state control body;
e) failure to deliver an inspection report to the head of a critical information infrastructure entity or an official authorized by him;
f) conducting a scheduled inspection not included in the annual plan for conducting scheduled inspections.
XI. Rights, duties and responsibilities of the subject
critical information infrastructure when implementing
state control
46. When conducting an inspection, the head of a critical information infrastructure entity or an official authorized by him/her has the right to:
a) receive from the state control body and its officials information that relates to the subject of the inspection and the presentation of which is provided for by these Rules;
b) get acquainted with the results of the inspection and indicate in the inspection report about your familiarization with the results of the inspection, agreement or disagreement with them, as well as with individual actions of officials of the state control body;
c) appeal against the actions (inaction) of officials of the state control body, which entailed a violation of the rights of the subject of critical information infrastructure during the inspection, in administrative and (or) judicial proceedings in accordance with the legislation of the Russian Federation.
47. When conducting an inspection, the head of a critical information infrastructure entity or an official authorized by him must:
a) be directly present during the inspection and provide explanations on issues related to the subject of the inspection;
b) provide officials of the state control body conducting the inspection with the opportunity to familiarize themselves with documents related to the tasks and subject of the inspection;
c) comply with the instructions of officials of the state control body to eliminate violations in terms of compliance with security requirements, issued by these persons in accordance with their competence;
d) ensure, taking into account the access control requirements, unimpeded access for officials conducting inspections to the territory, buildings, structures, structures, premises used in the implementation of activities and to significant objects of critical information infrastructure;
e) in the case provided for by the internal regulations of the subject of critical information infrastructure, on the first day of the inspection, conduct a briefing on compliance with safety precautions while on the territory where the inspected significant object of critical information infrastructure is located, with officials of the state control body carrying out the inspection;
f) take measures to eliminate identified violations.
48. The head of a subject of critical information infrastructure or an official authorized by him, who has committed a violation of the provisions of these Rules, unreasonably impeding the inspection, evading the inspection and (or) not complying with the instructions of the state control body to eliminate identified violations of security requirements within the prescribed period, bear responsibility in accordance with the legislation of the Russian Federation.
49. If it is impossible to comply with the order provided for in subparagraph "a" of paragraph 39 of these Rules, for reasons beyond the control of the subject of critical information infrastructure, the subject of critical information infrastructure, before the expiration of the deadline for fulfilling the order, has the right to submit a reasoned appeal for an extension of the deadline for fulfilling the order to the manager the state control body that issued such an order. The appeal of a subject of critical information infrastructure is subject to consideration in the manner prescribed by paragraph 40 of these Rules.
50. In case of disagreement with the facts set out in the inspection report and (or) the order to eliminate the identified violation, the head of the subject of critical information infrastructure or an official authorized by him has the right to submit objections to the state control body that conducted the inspection within 15 days from the date of receipt of the inspection report in writing in relation to the inspection report and (or) the issued order to eliminate the identified violation as a whole or their individual provisions. In this case, the subject of critical information infrastructure has the right to attach to the objections documents confirming the validity of such objections, or their certified copies, or within the agreed period to transfer them to the state control body.
Resolution 162 On approval of the Rules for gas supply in the Russian Federation / RF / 162
Decree of the Government of the Russian Federation of February 5, 1998 No. 162
"On approval of the Rules for gas supply in the Russian Federation"
(as amended as of November 8, 2018,
with changes and additions, included in the text,
according to the resolutions of the Government of the Russian Federation: dated December 7, 2005 No. 738,
dated 10.05.2010 No. 311, dated 24.11.2011 No. 973, dated 26.03.2012 No. 234,
dated 08.08.2013 No. 679, dated 19.06.2014 No. 566, dated 23.07.2015 No. 741,
No. dated November 25, 2016, No. 139 dated February 4, 2017, No. 1663 dated December 27, 2017,
dated October 29, 2018 No. 1282)
In order to increase the reliability of gas supply in the Russian Federation, in accordance with Decree of the President of the Russian Federation of April 28, 1997 No. 426 “On the Basic Provisions of Structural Reform in the Spheres of Natural Monopolies” (Collected Legislation of the Russian Federation, 1997, No. 18, Art. 2132) The Government of the Russian Federation decides:
1. Approve the attached Rules for gas supply in the Russian Federation.
2. Recognize as invalid the Decree of the Government of the Russian Federation of December 30, 1994 No. “On approval of the Rules for the supply of gas to consumers of the Russian Federation” (Collected Legislation of the Russian Federation, 1995, No. 2, Art. 152).
Rules for gas supply in the Russian Federation
I. General provisions
1. These Rules define the relationship between gas suppliers and buyers, including gas transportation organizations and gas distribution organizations, and are binding on all legal entities involved in gas supply relations through pipeline networks.
2. The supplier, gas transportation and gas distribution organizations and gas buyer are obliged to strictly comply with technical operation and safety rules in order to ensure reliable gas supply and rational use of gas.
II. Terms and definitions
3. The following terms and definitions are used in these Rules:
"gas"- natural, petroleum (associated) and stripped dry gases produced and collected by gas and oil producing organizations and produced by gas and oil refineries;
"gas consumption armor"- the minimum volume of gas consumption required for accident-free, subject to the maximum use of reserve fuels, operation of the technological equipment of buyers, gas supplies to which, in accordance with the laws and other regulatory legal acts of the Russian Federation, cannot be stopped or reduced below a certain limit;
"gas distribution organizations"- specialized republican, regional, regional, city, interdistrict, rural organizations engaged in the development and operation of gas supply systems to territories, providing gas to customers, as well as providing gas transportation services through their networks;
"gas transport organization"- an organization providing gas transportation whose main gas pipelines and gas pipeline branches are owned or on other legal grounds;
"gas transport system"- a gas pipeline system connecting a gas producer and a gas consumer, including main gas pipelines, gas branch pipelines, gas distribution networks owned by a gas transportation, gas distribution organization or buyer or on other legal grounds;
"gas failure"- selection (receipt) of gas by the buyer in a volume of less than daily norm gas supply in the event that the gas pressure provided by the supplier at the point of transmission gave the buyer the opportunity to select (receive) gas in the volume established by the contract;
"excessive gas consumption"- selection by the buyer of gas in a volume exceeding the daily supply rate;
"billing period"- the period agreed upon by the parties to the contract, during which the volume of gas supplied must be determined, mutual settlements must be made between the supplier, gas transportation, gas distribution organizations and the buyer for the supplied gas. The billing period agreed upon by the parties is indicated in the contract;
"average daily gas supply"- volume of gas supply, determined by dividing the monthly volume of supply by the number of days of the corresponding month;
"daily gas supply rate"- the average daily gas supply rate or the rate established by the dispatch schedule or agreement of the parties;
"gas transportation"- movement and transmission of gas through the gas transportation system.
III. Procedure for concluding contracts
4. Before using gas as fuel, the buyer must fulfill the technical conditions for connecting gas-using equipment to the gas distribution system. Technical conditions for connection to the gas transportation and gas distribution system are issued by the gas transportation or gas distribution organization, respectively.
Costs associated with connecting the gas supplier's and buyer's facilities to the gas transportation system are at their expense.
5. Gas is supplied on the basis of an agreement between the supplier and the buyer, concluded in accordance with the requirements of the Civil Code of the Russian Federation, federal laws, these Rules and other regulatory legal acts.
The gas supply agreement must comply with the requirements of paragraph 3 of Chapter 30 of the Civil Code of the Russian Federation.
The gas balance for the Russian Federation is developed and approved by the Ministry of Energy of the Russian Federation in agreement with the Ministry of Economic Development of the Russian Federation based on gas resources and the forecast of the needs of Russian consumers for fuel and energy resources. The gas balance for Russia is of a recommendatory nature for gas suppliers and buyers.
In the event that a minimum volume of gas consumption is established for individual customers in accordance with established by law In the Russian Federation, the contract must, at the request of such a buyer, determine the volume of gas supply not less than this minimum level.
The supply of gas to persons providing services for the formation of a promising technological reserve of electrical energy production capacity in accordance with Decree of the Government of the Russian Federation dated December 7, 2005 No. 738 is carried out on the basis of an agreement with the gas supplier concluded for a period not less than the validity period of the agreement on the provision services for the formation of a promising technological reserve of electrical energy production capacities, unless otherwise established by agreement of the parties.
5.1. To conclude a gas supply agreement (with the exception of gas supply agreements concluded at organized auctions), the applicant who intends to act as a buyer under such an agreement has the right to contact the supplier with an application for the purchase of gas, which indicates the full and abbreviated name of the legal entity (last name, first name , patronymic of an individual entrepreneur), bank details, estimated period and start date of gas supply, number and location (name) of connection points and gas-using equipment for each of them, volume of gas requested for supply for the entire expected period of the contract (or annual volume of gas) broken down by month and quarter for each or all connection points.
Copies of the following are attached to the application for gas purchase:
constituent documents of a legal entity or passport of an individual entrepreneur;
certificates of state registration of a legal entity or certificates of state registration of an individual as an individual entrepreneur;
documents confirming the authority of persons to sign an agreement on behalf of the buyer;
documents confirming that gas-using equipment (gas supply facilities) belongs to the applicant on the right of ownership or on another legal basis, and technical passports for the said equipment;
act on connection (technological connection) or act on connecting the facility to gas distribution networks through which gas can be supplied to the applicant. If the connection (technological connection) of the specified facility was carried out before the entry into force of the Decree of the Government of the Russian Federation of February 13, 2006 No. 83 “On approval of the Rules for determining and providing technical conditions for connecting a capital construction facility to engineering support networks and the Rules for connecting a capital construction facility to engineering and technical support networks, the specified documents are attached to the application for the purchase of gas, if available;
documents confirming that the share of the supply of thermal energy to budgetary institutions, the activities of which are financed from the corresponding budget on the basis of estimates of income and expenses, state-owned enterprises, homeowners' associations, housing construction, housing and other specialized consumer cooperatives, management organizations or individual entrepreneurs who manage apartment buildings, in the total volume of goods supplied by the buyer and services provided is more than 75 percent (represented by heat supply entities with the specified share of supplied thermal energy);
document confirming the establishment of gas consumption reservation.
Copies of the documents provided for in this paragraph are certified by the persons who issued (drew up) such documents, or by a person authorized in accordance with the legislation of the Russian Federation to carry out actions to certify copies of such documents.
The application for the purchase of gas and the documents attached to it (provided they comply with the requirements of this paragraph) are considered by the supplier within 30 days from the date of their receipt. Within the specified 30-day period, the supplier sends the applicant a proposal to conclude a gas supply agreement (a draft agreement signed by the supplier) or a written reasoned refusal to conclude it.
6. Buyers of gas for government needs, for municipal needs and the population have a pre-emptive right to conclude gas supply agreements, as well as buyers who have previously entered into gas supply agreements - to prolong these agreements.
7. The buyer or supplier of gas has the right to transport it in accordance with the provisions on ensuring access of independent organizations to the gas transmission system of the open joint stock company Gazprom and to gas distribution networks approved by the Government of the Russian Federation.
8. The procedure and conditions for transporting gas through the gas transportation system are established by the gas transportation or gas distribution organization and are formalized by an agreement in accordance with these Rules.
9. A proposal to conclude a gas supply agreement is sent by the supplier to the buyer who has previously submitted an application for the purchase of gas.
10. A proposal to conclude a gas transportation agreement is sent by a gas transportation or gas distribution organization to the supplier (buyer) simultaneously with a permit to access the gas transportation system, issued in accordance with the procedure established by the Government of the Russian Federation.
11. Consent to conclude a gas supply agreement or a gas transportation agreement (signed draft agreement) must be sent by the party that received the proposal to conclude an agreement (offer) no later than 30 days from the date of its receipt, unless a different period is specified in the offer.
If you disagree with the terms of the contract, the party who received the offer is obliged to send the other party a protocol of disagreements; in case of non-receipt of the protocol of disagreements signed by the supplier within 30 days from the date of sending the protocol of disagreements, contact the arbitration or arbitration court and upon expiration of the contract concluded for the previous period, stop gas sampling.
The selection (continuation of selection) of gas by the buyer after the expiration of the specified 30-day period and (or) the validity period of the agreement concluded for the previous period is considered the consent of the party that received the offer to enter into a gas supply (transportation) agreement on the terms of the supplier (gas transportation or gas distribution organization ).
If the buyer appeals to the arbitration court, the validity of the gas supply agreement concluded for the previous period is extended until the court decision comes into force.
11.1. The supply (selection) of gas without an agreement concluded in the manner prescribed by these Rules is not permitted. Such gas withdrawal is considered unauthorized (unauthorized).
IV. Conditions, terms and procedure for execution of contracts
12. The supplier is obliged to supply and the buyer to select gas in the quantity specified in the gas supply agreement.
12.1. The gas supply agreement determines the monthly, quarterly and annual gas supply volumes and (or) the procedure for their approval, as well as the procedure for changing the gas supply volumes specified in the agreement.
13. The supplier is obliged to supply and the buyer to receive (take away) gas evenly throughout the month within the limits of the average daily gas supply rate established by the contract, and, if necessary, according to the dispatch schedule agreed between the parties (including the owners of the gas transportation system).
Uneven supply of gas by day over the course of a month is allowed in cases provided for in the contract.
The gas supply contract, which provides for uneven gas supply throughout the day during the month, must define the minimum and maximum daily volumes of gas supply. At the same time, the minimum daily gas supply volume should not be more than 20 percent lower, and the maximum daily gas supply volume should not be more than 10 percent higher than the average daily gas supply rate. This rule does not apply to gas supply contracts concluded at organized auctions.
Unless otherwise provided by the agreement between the supplier and the buyer, the unevenness of gas supply on a daily basis agreed upon by the contract does not entail a corresponding change in the monthly contractual volumes of gas supply.
The provisions of this paragraph on the uniformity and unevenness (including minimum and maximum daily volumes) of gas supplies do not apply to the contractual volumes established by the dispatch schedule.
14. At the buyer’s request, uneven gas supply on a daily basis during the month is provided for in the gas supply agreement in following cases:
paragraph two has lost force according to the Decree of the Government of the Russian Federation of November 25, 2016 No. 1245 ;
if gas is supplied for municipal needs, for boiler houses and thermal power plants in volumes that meet the heat energy needs of municipal organizations and the population;
if gas is supplied to generating facilities, with the use of which the electric power industry provides services for the formation of a promising technological reserve of electrical energy production capacity in accordance with Decree of the Government of the Russian Federation of December 7, 2005 No. 738 and in respect of which in accordance with the legislation of the Russian Federation the volume of electrical energy required for production with an uneven loading schedule during the day has been determined.
15. If the buyer overconsumption of gas, the supplier has the right to forcibly limit its supply to the established daily gas supply rate after 24 hours from the moment of warning the buyer and the executive authorities of the constituent entities of the Russian Federation.
16. Failure to sample gas does not give the buyer the right to subsequently demand an increase in gas supplies beyond the daily norm.
In case of non-sampling of gas by buyers consuming up to 10,000 thousand cubic meters. meters of gas per year, in accordance with the concluded gas supply contracts, the volume of unselected gas is not paid for and sanctions for non-supply of gas are not provided.
A different rule regarding the buyer for non-sampling of gas under gas supply contracts concluded at organized auctions may be established in the specified contracts.
17. If there is excessive consumption of gas without prior agreement with the supplier, gas transportation or gas distribution organization, the buyer pays additionally for the volume of gas selected by him in excess of that established by the contract and the cost of its transportation for each day using the coefficient:
This rule does not apply to gas volumes consumed by the population and household consumers.
A different rule regarding the buyer for excess gas consumption may be established in gas supply contracts concluded at organized auctions, or in gas supply contracts in relation to natural gas produced by the public joint stock company Gazprom and its affiliates and sold to organizations for the production of natural gas in liquefied state or organizations that entered into gas supply agreements after November 1, 2018, providing for the start of natural gas supplies after January 1, 2020, for the production of methanol from natural gas in a gaseous state for subsequent export.
The obligation to timely provide the supplier with documentary evidence of the grounds provided for in this paragraph for not applying coefficients to the cost of the relevant volumes of gas and its transportation rests with the buyer.
18. The gas pressure provided for in the gas supply and transportation contracts is maintained subject to sampling by the buyer within the daily gas supply rate.
19. Executive authorities of the constituent entities of the Russian Federation approve the schedules:
transfer of consumers to reserve types of fuel during cold weather and the procedure for putting these schedules into effect in order to ensure the execution of the state contract for the supply of gas for state needs, export contracts under international obligations, contracts for the supply of gas for municipal needs and the population;
restrictions on the supply of gas to customers and the order in which they are disconnected in the event of a violation of the technological operating mode of the gas transmission system in the event of an accident.
Instructions on the implementation of the mentioned schedules and the corresponding change in the daily volume of gas transferred to buyers are given by the Central Production and Dispatch Department of the open joint-stock company Gazprom.
Such instructions from the Central Production and Dispatch Department of the open joint-stock company Gazprom on the mode of gas transportation, supply and selection are mandatory for suppliers, gas transportation and gas distribution organizations and gas buyers.
The procedure for preparing instructions on the implementation of the mentioned schedules is approved by the Ministry of Energy of the Russian Federation.
During the period of validity of the mentioned schedules for individual constituent entities of the Russian Federation, gas supplies to the specified constituent entities of the Russian Federation under gas supply contracts concluded at organized auctions may be suspended until the mentioned schedules are cancelled.
20. If the supplier does not have the opportunity to directly supply gas to the buyer, the supply agreement determines the party concluding a gas transportation agreement with the gas transportation (gas transportation) and (or) gas distribution organizations.
V. Gas metering
21. Supply and selection of gas without taking into account its volume is not allowed.
22. Accounting for gas volumes is carried out in accordance with the procedure approved by the Ministry of Energy of the Russian Federation.
A gas transportation and distribution organization may be assigned by a gas transportation agreement the duties and powers to accept, transfer and ensure accounting for the supplied gas on behalf of the supplier (buyer). The supplier (buyer) who has entered into a gas transportation agreement notifies the counterparty about this.
23. In the event of a malfunction or absence of measuring instruments at the transmitting party, the volume of transferred gas is taken into account according to the control and measuring measuring instruments of the receiving gas party, and in their absence or malfunction - according to the volume of gas consumption corresponding to the design capacity of unsealed gas consuming installations and the time during which it was supplied gas during a malfunction of measuring instruments, or by another method provided for by the contract.
24. Installation, operation and verification of measuring instruments are carried out in the manner established by the legislation of the Russian Federation on ensuring the uniformity of measurements.
25. Responsibility for the technical condition and verification of gas metering instruments lies with the organizations that own the measuring instruments.
26. Each party to a gas supply agreement or a gas transportation agreement is obliged to provide the representative of the other party with the opportunity to check at any time the operability of measuring instruments, the availability of valid certificates of their verification, as well as documents on the accounting and use of gas by the buyer.
27. The clause has lost force according to Decree of the Government of the Russian Federation dated July 23, 2015 No. 741.
28. The party maintaining gas accounting in accordance with the procedure approved by the Ministry of Energy of the Russian Federation, monthly, before the fifth day of the month following the billing period, draws up an act on the volume of gas transferred, which reflects the daily volumes of gas reception and transmission.
If one of the parties disagrees with the determination of the volume of transferred gas, it signs an act, expressing a dissenting opinion.
If there are disagreements, the parties have the right to go to court.
Before the court makes a decision, the volume of gas transferred is established in accordance with the readings of the measuring instruments of the party transmitting the gas.
VI. Payments for gas and its transportation
29. Gas prices and tariffs for its transportation are indicated in the relevant contracts in accordance with the legislation of the Russian Federation and regulations of federal executive authorities.
30. Gas supply and selection are carried out exclusively on a reimbursable basis in accordance with the concluded agreement.
The settlement procedure and payment terms are determined by gas supply contracts in accordance with these Rules.
Contracts under which gas distribution organizations are suppliers must contain the following: prerequisites gas payments:
crediting funds received by gas distribution organizations for supplied gas to specially opened transit accounts of these organizations;
transfer of funds credited to special transit accounts of gas distribution organizations, minus the amounts of surcharges of gas distribution organizations, to the settlement accounts of their suppliers no later than the day following the day of receipt of funds to these transit accounts.
31. The terms of payment for gas transportation are determined by the gas transportation contract on the basis of tariffs for its transportation, established in the manner determined by the federal executive authorities.
VII. Rights and obligations of the parties under the agreement
32. The parties fulfill contractual obligations in accordance with the Civil Code of the Russian Federation, other laws and legal acts of the Russian Federation and these Rules.
33. The gas distribution organization is obliged to immediately implement a complete restriction of gas supply to the consumer, whose networks are directly connected to the networks of the specified gas distribution organization (gas transporter), in the event of an emergency situation and a threat to human life and (or) health caused by the unsatisfactory condition of the consumer’s gas-using equipment.
34. The supplier has the right to reduce or completely stop the supply of gas to customers (but not below the gas consumption reservation) in the event of repeated violation of payment terms for the supplied gas and (or) for its transportation, with the exception of consumers, the list of which is approved by the Government of the Russian Federation.
The decision to stop gas supplies is valid until the circumstances that served as the basis for making such a decision are eliminated.
35. The supplier is obliged to ensure gas quality in accordance with regulatory requirements.
36. Odorization of gas is carried out in accordance with regulatory and technical documentation.
37. The supplier, gas transportation and gas distribution organizations and the buyer are, in accordance with the established procedure, responsible for the technical condition of their gas supply facilities and compliance with operational dispatch discipline.
38. The supplier, gas transportation and gas distribution organizations and the buyer are obliged to immediately notify each other about accidents and malfunctions at gas supply facilities leading to disruption of the gas supply or receipt regime.
39. The gas distribution organization provides, at the request of the supplier, operational information about the gas consumption regime and the status of payments for gas supplied to customers.
40. The gas transportation organization provides, at the request of the gas distribution organization, operational information on the volumes and modes of gas supply for each gas distribution station.
VII.1. The procedure for determining buyers obligated to provide security for the fulfillment of obligations to pay for gas supplied under a gas supply agreement concluded with a supplier, and the procedure for providing such security
40.1. The buyer is obliged to provide the supplier with security for the fulfillment of obligations to pay for gas supplied under the gas supply agreement, if the buyer has not fulfilled or improperly fulfilled the obligations to pay for gas to the supplier and this has led to the formation of a debt to the supplier to pay for gas in an amount equal to twice the average monthly amount of obligations buyer for gas payment or exceeding such double amount.
When determining whether the buyer (with the exception of the heat supply organization) meets the criterion established by the first paragraph of this paragraph, the debt to the supplier for gas payment, confirmed by a court decision that has entered into legal force or recognized by the buyer, is taken into account.
When determining the compliance of the buyer - the heat supply organization with the criterion established by the first paragraph of this paragraph, the amount of debt of the heat supply organization to the supplier for gas payment, multiplied by a factor of 0.6, confirmed by a court decision that has entered into legal force or recognized by the heat supply organization, is taken into account.
Documents evidencing the buyer's recognition of a debt to the supplier are documents that contain the buyer's express consent to the fact of the existence of a debt to the supplier and the amount of such debt (an agreement between the supplier and the buyer, a reconciliation act for mutual settlements, a letter signed by an authorized person of the buyer, or other document).
For the purpose of applying these Rules, the average monthly amount of gas payment obligations (P obligation) is determined by the supplier using the formula:
S post - the cost of gas indicated in invoices for payment of actually consumed gas or in other payment documents issued by the supplier to the buyer for the billing periods for which the buyer incurred the debt to the supplier specified in paragraph one of this paragraph, confirmed by a court decision that has entered into legal force or accepted by the buyer;
n - the number of months in the period for which the cost of gas was determined (S post) and for which the buyer incurred the debt to the supplier specified in paragraph one of this paragraph, confirmed by a court decision that has entered into legal force or recognized by the buyer.
40.2. The supplier identifies a buyer who meets the criterion provided for in paragraph one of these Rules and sends him a notice of the obligation to provide security for the fulfillment of obligations to pay for gas in a manner that allows confirming the fact and date of receipt of the notice.
Notification of the obligation to provide security for the fulfillment of obligations to pay for gas is sent within a period not exceeding 6 months from the date the debt arose, in the presence of which, in accordance with paragraph of these Rules, the buyer is obliged to provide the supplier with security for the fulfillment of obligations to pay for gas.
The said notice must contain the following information:
the amount of the buyer's debt, which served as the basis for presenting a requirement to provide security for the fulfillment of obligations, calculation of the specified amount of debt and the average monthly amount of the buyer's obligations to pay for gas;
the amount of security for the fulfillment of gas payment obligations to be provided by the buyer to the supplier;
the period for which security for the fulfillment of gas payment obligations must be provided;
the period during which it is necessary to provide security for the fulfillment of obligations to pay for gas.
40.3. The amount of security for the fulfillment of obligations to pay for gas to be provided by the buyer, which meets the criterion provided for in the first paragraph of paragraph of these Rules, is determined by the supplier and cannot exceed the amount of the buyer's debt to pay for gas, which served as the basis for the requirement to provide security for the fulfillment of obligations.
40.4. The buyer, who meets the criterion provided for in paragraph one of paragraph of these Rules, is obliged to provide the supplier with security for the fulfillment of obligations to pay for gas for a period determined by the supplier. The specified period cannot exceed 6 months from the date of provision of security for the fulfillment of obligations.
40.5. The period during which it is necessary to provide security for the fulfillment of obligations to pay for gas is determined by the supplier, and the end date of this period cannot occur earlier than 60 days from the date the buyer receives notification of the obligation to provide security for the fulfillment of obligations to pay for gas.
40.6. Security for the fulfillment of obligations to pay for gas is provided by the buyer who meets the criterion provided for in the first paragraph of paragraph of these Rules and is determined by the supplier, in the form of an independent guarantee issued by the bank that meets the requirements of the legislation of the Russian Federation (hereinafter referred to as the bank guarantee).
The bank guarantee ensures the fulfillment of obligations arising after its issuance to pay for gas supplied under gas supply contracts.
By agreement with the supplier, the buyer may be provided with a state or municipal guarantee, or the fulfillment of gas payment obligations may be ensured by other means provided for by law or contract.
Providing security for the fulfillment of obligations to pay for gas is not required if, before the expiration of the period provided for in paragraph seven of this Rule, the obligations to pay for gas, the non-fulfillment or improper fulfillment of which served as the basis for the buyer's obligation to provide security for the fulfillment of obligations, are fulfilled in full.
40.7. If the bank guarantee provided by the buyer satisfies the requirements of the Federal Law "On Gas Supply in the Russian Federation" and these Rules or if the other security provided for the fulfillment of obligations to pay for gas complies with the method and conditions for securing the fulfillment of obligations agreed upon between the supplier and the buyer, as well as the requirements of the law or agreement, the supplier, no later than 3 working days from the date of receipt of the bank guarantee (other security for the fulfillment of obligations to pay for gas), sends the buyer a notification of its acceptance in a way that allows confirming the fact and date of receipt of the notification.
If the provided bank guarantee does not satisfy the requirements of the Federal Law "On Gas Supply in the Russian Federation" and these Rules, the supplier, within the period provided for in paragraph one of this paragraph, sends to the buyer a notice of non-acceptance of the provided bank guarantee, indicating the reason for non-acceptance in a way that allows confirming the fact and date of receipt of the notification.
If the provided other security for the fulfillment of gas payment obligations does not comply with the method and conditions for securing the fulfillment of obligations agreed upon between the supplier and the buyer, as well as the requirements of the law or contract, the supplier, within the period provided for in paragraph one of this paragraph, sends the buyer a notice of non-acceptance of the provided security execution, indicating the reason for non-acceptance in a way that allows you to confirm the fact and date of receipt of the notification.
40.8. The supplier prepares proposals to form a list of buyers for whom gas suppliers are required to provide security for the fulfillment of obligations to pay for the supplied gas.
These offers must contain the following information about the buyer:
full and abbreviated (if any) name of the legal entity, its address, taxpayer identification number and reason code for registering the legal entity with the tax authority in accordance with the information contained in the Unified state register legal entities;
last name, first name and patronymic (if any) of the individual entrepreneur (individual), taxpayer identification number in accordance with the information contained in the Unified State Register of Individual Entrepreneurs (if such information is available);
The supplier sends these proposals electronically to the highest official of the constituent entity of the Russian Federation (the head of the highest executive body of state power of the constituent entity of the Russian Federation), in the territory of which this supplier supplies gas, monthly, no later than the 5th working day of the month.
In the event that the buyer fully repays the gas payment debt, which served as the basis for the obligation to provide security for the fulfillment of obligations, the supplier sends electronically no later than the 5th working day of the month following the month in which the specified debt was repaid, a proposal to exclude such buyer from a list of buyers, compiled in accordance with paragraph of these Rules, to the highest official of the constituent entity of the Russian Federation (the head of the highest executive body of state power of the constituent entity of the Russian Federation), in the territory of which this supplier supplies gas.
40.9. The highest official of a constituent entity of the Russian Federation (the head of the highest executive body of state power of a constituent entity of the Russian Federation), no later than the 5th working day following the day of receipt from suppliers of proposals specified in paragraph of these Rules, creates a list of gas buyers in respect of whom gas suppliers have established the obligation to provide security for the fulfillment of obligations to pay for gas, and places the specified list in open access on the official website of the highest official of a constituent entity of the Russian Federation (the head of the highest executive body of state power of a constituent entity of the Russian Federation) on the Internet information and telecommunications network.
This list is maintained electronically by entering the following information about customers into it:
full and abbreviated (if any) name of the legal entity;
last name, first name and patronymic (if any) of the individual entrepreneur (individual);
address of the legal entity;
taxpayer identification number;
reason code for registering a legal entity with the tax authority;
the date the buyer receives notice of the obligation to provide security for the fulfillment of obligations.
The absence in the specified list posted on the information and telecommunications network "Internet" of information about the buyer who meets the criterion provided for in the first paragraph of paragraph of these Rules does not relieve such buyer from the obligation to provide security for the fulfillment of obligations to pay for gas at the request of the supplier.
40.10. In the event of failure by a buyer who meets the criterion provided for in paragraph one of these Rules to provide security for the fulfillment of obligations to pay for gas before the expiration of the period for providing security provided for by the notification specified in paragraph of these Rules, and if the specified buyer has a debt to the supplier, which served as the basis for the presentation requirements for the provision of security for the fulfillment of obligations, the supplier sends to the federal executive body, whose competence includes the consideration of cases of administrative offenses related to violation of the procedure for providing security for the fulfillment of obligations to pay for gas, the information specified in paragraph of these Rules, as well as the following information and original documents (duly certified copies of documents):
a) a statement from the supplier containing data indicating the presence of an administrative violation event, including information on the amount of the buyer’s debt, which served as the basis for filing a requirement against him to provide security for the fulfillment of obligations, as well as calculation of the amount of the said debt and the average monthly amount of gas payment obligations ;
b) last name, first name, patronymic (if any), date of birth, place of residence of the manager and (or) other official of the buyer (if such information is available);
c) an agreement under which the buyer violated obligations to pay for gas;
d) court decisions that have entered into legal force confirming the existence of the buyer’s debt, and (or) documents confirming the buyer’s recognition of the debt to the supplier;
e) invoices for gas payments or other payment documents, in connection with non-payment of which the buyer has a debt, which served as the basis for his obligation to provide security for the fulfillment of obligations;
f) a certificate signed by an authorized person of the supplier and confirming the lack of full payment of the debt that served as the basis for sending a notice of the obligation to provide security for the fulfillment of obligations, and the fact of non-provision this security within the prescribed period, and (or) other documents confirming the fact of the buyer’s failure to fulfill the obligation to provide security for the fulfillment of obligations to pay for gas;
g) notice of the obligation to provide security for the fulfillment of obligations to pay for gas or information contained in such a notice;
h) documents confirming the fact and date of receipt by the buyer of the notification of the obligation to provide security for the fulfillment of obligations to pay for gas;
i) documents confirming the person’s authority to sign the application.
VIII. Responsibility for violation of these Rules
41. The supplier, gas transportation and gas distribution organizations and the buyer are responsible for violation of these Rules in accordance with the legislation of the Russian Federation and the contract.
Decree of the Government of the Russian Federation of February 25, 2000 N 162
"On approval of the list of heavy work and work with harmful or dangerous working conditions, during which the use of women's labor is prohibited"
In accordance with Article 10 of the Federal Law “On the Fundamentals of Labor Safety in the Russian Federation” (Collection of Legislation of the Russian Federation, 1999, No. 29, Art. 3702), the Government of the Russian Federation decides:
Approve the attached list of heavy work and work with harmful or dangerous working conditions, during which the use of women’s labor is prohibited.
Scroll
heavy work and work with harmful or dangerous working conditions, during which the use of women’s labor is prohibited
(approved by Decree of the Government of the Russian Federation of February 25, 2000 N 162)
I. Work related to lifting and moving heavy objects manually
1. Work related to lifting and moving heavy objects manually, in case of exceeding established standards
II. Underground work
2. Underground work in the mining industry and in the construction of underground structures, with the exception of work performed by women holding leadership positions and not performing physical work; women engaged in sanitation and household services; women undergoing training and admitted to internships in the underground parts of the organization; women who must go down from time to time into the underground parts of the organization to perform work of a non-physical nature (the list of positions of managers, specialists and other workers associated with underground work, in which the use of female labor is permitted, as an exception, is given in paragraph 2 of the notes to this list)
III. Metalworking
Foundry work
3. Cupola maker
4. Casting beater engaged in manual knocking
5. Batch loader in cupolas and furnaces, busy loading the batch manually
6. Casting welder
7. Metal pourer
8. Chopper working with pneumatic tools
9. Melter of metal and alloys
10. Workers engaged in hanging hot castings on a conveyor and servicing and repairing equipment in foundry tunnels
Welding work
11. Gas welder and electric welder of manual welding, working in closed containers (tanks, boilers, etc.), as well as on high-rise communication structures (towers, masts) over 10 meters and steeplejack work
Boiler rooms, cold forming, drawing and pressing works
Work performed by profession:
12. Boilermaker
13. A turner on spinning lathes, doing manual work
14. A chaser working with hand-held pneumatic tools
Forging and pressing and thermal works
Work performed by profession:
15. A bandage worker engaged in hot work
16. A spring operator engaged in hot work when winding springs from wire with a diameter of over 10 mm
17. Roller busy rolling out rings while hot
18. Spring operator at hot metal processing
Metal coating and painting
19. Sealing inside caisson tanks
20. Constant work on lead plating using the hot method (not galvanic)
Mechanical and metalwork-assembly works
Work performed by profession:
21. A pneumatic driller performing work with a pneumatic tool that transmits vibration to the worker’s hands
22. A repairman engaged in: setting up equipment in workshops and departments: hot-rolling, pickling, enameling, insulation using organosilicon varnishes, lead coating in cable production; on hot repairs of selenium and shoeing devices (equipment);
setting up equipment in workshops and departments for the preparation and use of organosilicon varnishes and varnishes containing 40 or more percent of toluene, xylene;
repair of equipment in closed fuel warehouses and oil facilities at thermal power plants, as well as repair of equipment in tunnels and heating chambers in heating networks;
maintenance of water jacket furnaces in the production of non-ferrous metals and alloys;
adjustment and repair of chill molds in a hot state;
directly in the shops: mill, lubricating, forming, foundry, pipe-filling, gleymixing and assembly shops in the production of lead batteries;
repair of technological equipment at engine testing stations, running on leaded gasoline and located in boxes
Working with lead
23. Smelting, casting, rolling, drawing and stamping of lead products, as well as lead coating of cables and soldering of lead batteries
IV. Construction, installation and repair work
24. Hot repair of furnaces and boiler furnaces
25. Uprooting stumps
26. Fastening structures and parts using a construction gun
27. Slab breaking works, dismantling of buildings and structures
28. Punching holes (grooves, niches, etc.) in concrete, reinforced concrete and stone (brick) structures manually and using pneumatic tools
Work performed by profession:
29. An armature worker engaged in manual installation of frames, manual bending machines and scissors
30. Asphalt concrete worker, asphalt concrete worker-cooker, working manually
31. Hydraulic monitor
32. A digger working on sinking wells
33. A mason engaged in laying modular solid sand-lime bricks
34. Roofer for steel roofs
35. Caisson operator-operator, caisson operator-miner, caisson operator-fitter, caisson operator-electrician
36. Motor grader operator
37. Asphalt dispenser driver, pit driver
38. Operator of a concrete pumping unit, operator of a mobile bitumen melting unit
39. Bulldozer driver
40. Grader-elevator driver
41. Operator of a mobile asphalt concrete mixer
42. Asphalt concrete paver operator
43. Driver of a single-bucket excavator, operator of a rotary excavator (ditch digger and trencher)
44. Operator of a mobile electric welding unit with an internal combustion engine
45. A mobile power plant operator working at a power plant with an internal combustion engine with a capacity of 150 hp. and more
46. Communications installer/antenna operator working at heights
47. Installer for installation of steel and reinforced concrete structures when working at height and steeplejack work
48. Lead solder (lead solder)
49. Carpenter
50. Plumber repairing the sewer network
51. Pipe laying of industrial reinforced concrete pipes
52. Pipe laying industrial brick pipes
V. Mining operations
Open pit mining and the surface of existing mines and mines under construction, beneficiation, agglomeration, briquetting
Work performed in general mining and capital mining professions:
53. Hole driller
54. Bomber, Master Blaster
55. Miner for fire prevention and extinguishing
56. Delivery of fastening materials to the mine
57. Fastener
58. Blacksmith-driller
59. Drilling rig operator
60. Loader driver
61. Machine operator for drilling full-section mine shafts
62. Excavator operator
63. Tipper engaged in manual rolling and rolling away of trolleys
64. Miner
65. Stemman, busy manually feeding trolleys into cages
66. Cleaner busy cleaning bins
67. Electrical mechanic (mechanic) on duty and for equipment repair, engaged in the maintenance and repair of equipment, mechanisms, water and air lines in mining operations
Work performed in the general professions of beneficiation, agglomeration, briquetting and certain categories of workers:
68. A crusher engaged in crushing hot pitch in the production of alumina
69. A roaster engaged in the process of roasting raw materials and materials in the production of mercury
70. Workers and foremen of processing and crushing and screening factories, mines, mines and metallurgical enterprises engaged in crushing, grinding, grinding and blending of ferrous, non-ferrous and rare metal ores, fluorspar and coal, which generates dust containing 10 percent or more free silicon dioxide, when working manually
71. Workers employed in lead enrichment shops
72. Workers and craftsmen engaged in the enrichment of niobium (loparite) ores
Construction of subways, tunnels and underground structures
special purpose
Work performed by profession:
73. Mining equipment installer
74. Miner at surface works
Ore mining
Work performed by profession:
75. Placer miner
76. Bit refueler
77. Drager
78. Dredge sailor
79. Dredge driver
80. Rocket launcher operator
Extraction and processing of peat
Work performed by profession:
81. Ditchman
82. Groomer
83. Operator of machines for the extraction and processing of sod peat
84. Operator of machines for preparing peat deposits for operation
85. Peat excavator operator
86. A peat worker engaged in felling trees and laying peat bricks
Processing of brown coals and ozokerite ores
Work performed by profession:
87. Mountain wax production operator
88. Ozokerite and ozokerite products production operator
89. Crusher
90. Briquette press operator
91. Filling machine operator
VI. Geological exploration and topographic-geodetic work
Work performed by profession:
92. Detonator, Master Demolitionist
93. Installer of geodetic signs
94. Electrical mechanic (fitter) on duty and equipment repair, employed in the field
VII. Well drilling
Work performed by profession:
95. Driller for production and exploration drilling of oil and gas wells
96. Derrick erector, rig-welder, derrick-electrician
97. Drilling rig operator
98. Well cementing operator
99. Motorist of a cementing unit, motorist of a cement-sand mixing unit
100. Pipe crimper
101. Assistant driller for production and exploration drilling of oil and gas wells (first)
102. Assistant driller for production and exploration drilling of oil and gas wells (second)
103. Drilling mud maker engaged in manual preparation of mud
104. Drilling rig maintenance mechanic, directly employed on drilling rigs
105. A mechanic repairing drilling equipment
106. Tool joint installer
107. Electrician for drilling rig maintenance
VIII. Oil and gas production
108. Well workover driller
109. Driller of a floating drilling unit at sea
110. Operator of a steam mobile dewaxing unit
111. Mobile compressor operator
112. Lift operator
113. Washing unit operator
114. Hydraulic fracturing operator
115. Operator for preparing wells for major and underground repairs
116. Underground well repair operator
117. Well chemical treatment operator
118. Assistant driller for major workover of wells
119. Assistant driller of a floating drilling unit at sea
120. Workers, managers and specialists constantly engaged in underground oil production
121. Mechanic for installation and repair of foundations of offshore drilling rigs and racks
122. Repairman engaged in installation and maintenance of process equipment and repair of oilfield equipment
123. Electrician for the repair and maintenance of electrical equipment, engaged in the maintenance and repair of technological equipment
IX. Ferrous metallurgy
124. Ladle worker working with molten metal
125. Metal heater engaged in work in methodical, chamber furnaces and wells of rolling and pipe production
126. Processor of surface defects of metal, engaged in work with pneumatic tools
Blast furnace production
Work performed by profession:
127. Top blast furnace
128. Blast Furnace Plumber
129. Blast furnace hearth
130. Operator of scale car
131. Skipova
Steelmaking
Work performed by profession:
132. Filling machine operator
133. Mixerova
134. Block stuffer
135. Furnace reduction of iron and annealing of iron powders
136. Melter of deoxidizers
137. Converter steelmaker's helper
138. Helper of the open-hearth furnace steelmaker
139. Helper of a steelmaker at an electroslag remelting installation
140. Electric furnace steelmaker's helper
141. Steel pourer
142. Converter steelmaker
143. Open hearth furnace steelmaker
144. Steelmaker of electroslag remelting plant
145. Electric furnace steelmaker
Rolling production
Work performed by profession:
146. Hot rolling mill roller
147. Pitch cook
148. Hot rolling mill operator's helper
149. Presser-stitcher of rail fastenings
150. Fitter-wire worker engaged in long-rolling production
Pipe production
Work performed by profession:
151. Calibrating mill roller
152. Roller of a hot pipe rolling mill
153. Roller of a furnace pipe welding mill
154. Roller of a cold pipe rolling mill
155. Roller of a pipe forming mill
156. Pipe drawer employed in non-mechanized mills
157. Pipe calibrator on a press
158. Blacksmith on hammers and presses
159. Helper of a rolling mill for hot rolling of pipes
160. Helper of the roller of a cold pipe rolling mill
Ferroalloy production
Work performed by profession and certain categories of workers:
161. Forge of ferroalloy furnaces
162. Melter engaged in melting and granulating molten vanadium pentoxide
163. Ferroalloy smelter
164. Workers engaged in the smelting of silicon alloys in open arc furnaces
165. Workers engaged in the production of metal chromium and chromium-containing alloys by an aluminothermic method
Coke production
166. Work related to direct employment in the production of benzene, its hydrotreating and rectification
Work performed by profession:
167. Barilletchik
168. Door
169. Crusher
170. Luke
171. Scrubber-pumper engaged in servicing the phenol installation in the coking products recovery shop
172. Repairman servicing coke oven batteries
X. Non-ferrous metallurgy
Work performed in general professions:
173. Anode pourer engaged in pouring anode bottom sections in the production of aluminum, silumin and silicon
174. Installer repairing bathtubs, engaged in drilling a recess for the cathode rod in the production of aluminum, silumin and silicon
175. Melter
176. Calcifier
177. Repairman, electrician for the repair and maintenance of electrical equipment, employed in the main metallurgical shops
178. Sinterer
179. A charger working at furnaces in the production of tin
Production of non-ferrous and rare metals, production of powders
from non-ferrous metals
180. Work performed by workers and craftsmen employed in workshops (departments and areas) for the production of titanium tetrachloride (tetrachloride)
181. Work performed by workers and craftsmen employed in the loparite concentrate chlorination shops
182. Work performed by workers and craftsmen employed in workshops (departments and areas) for the recovery of tetrachloride and metal separation in the production of titanium metal
183. Work performed by workers and craftsmen employed in departments (areas) of chlorination and rectification of titanium raw materials (slag)
184. Work performed by workers employed in the department of slag processing by sublimation at a fuming installation in tin production
185. Work performed by workers employed in smelting shops, as well as in the processing of cinders in the production of mercury
Work performed by profession:
186. Anode operator in aluminum production
187. Titanium sponge knocker
188. Metal pourer
189. Cathode
190. Converter
191. Capacitor
192. Installer of reaction apparatuses, engaged in the installation and dismantling of baths and furnaces, in the repair and restoration of reaction apparatuses
193. Mercury chopper
194. Pechevoy in the production of zinc dust
195. Pechevoy on Waelz kilns
196. Pechevoy on the recovery and distillation of titanium and rare metals
197. Furnace for the recovery of nickel powder
198. Furnace for processing titanium-containing and rare earth materials
199. Electrolyte bath slurry worker cleaning baths manually
200. Molten salt electrolyser
Pressure processing of non-ferrous metals
201. Work performed by a hot metal roller engaged in rolling non-ferrous metals and their alloys
Aluminum production by electrolytic method
202. Work performed by workers and craftsmen
Alumina production
203. Work performed by a loader operator engaged in repair work in hard-to-reach places of pneumatic and hydraulic loaders
XI. Repair of power plant equipment and networks
Work performed by profession:
204. Electrician for repair of overhead power lines, engaged in steeplejack work repairing high-voltage power lines
205. Electrician for the repair and installation of cable lines, engaged in the repair of cable glands with lead litharge and soldering of lead cable couplings and sheaths
XII. Abrasives production
Work performed by profession:
206. Balancer-pouring abrasive wheels, busy pouring abrasive products with lead
207. Bulldozer operator engaged in hot dismantling of resistance furnaces in the production of abrasives
208. Melter of abrasive materials
209. Podina worker employed in the corundum workshop
210. Resistance furnace dismantler employed in the silicon carbide production shop
XIII. Electrical production
Work performed in general professions:
211. Mercury distiller
212. Mercury rectifier molder performing work with open mercury
Electrocoal production
213. Work performed by workers on pitch smelting
Cable production
Work performed by profession:
214. Lead or aluminum cable crimper engaged in hot lead crimping
215. Remover of sheaths from cable products, engaged in removing only lead sheaths
Production of chemical power sources
Work performed by profession:
216. Foundry worker of lead alloy products
217. Dry mass mixer (for lead batteries)
218. Melter of lead alloys
219. Battery plate cutter engaged in stamping and separating formed lead plates
XIV. Radio engineering and electronic production
Work performed by profession:
220. A tester of parts and devices engaged in testing devices in thermobaric chambers at temperatures of +28 ° C and above and -60 ° C and below, provided that they are directly in them
221. Caster of magnets on crystallizer furnaces
222. Melter of shopalloy and bismuth
XV. Aircraft production and repair
Work performed by profession:
223. A mechanic for repairing aircraft engines and a mechanic for repairing units engaged in the repair of engines and units running on leaded gasoline
XVI. Shipbuilding and ship repair
Work performed by profession:
224. Reinforcement worker of reinforced concrete ships, working on vibrating tables, vibrating platforms, cassette installations and with manual vibrators
225. Ship bender engaged in hot bending
226. Boilermaker
227. Painter, ship insulator, engaged in painting work in tanks, second bottom areas, warm boxes and other hard-to-reach areas of ships, as well as in work on cleaning old paint in these areas of ships
228. Coppermaker for the manufacture of ship products, engaged in hot work
229. Ship carpenter working in closed compartments of ships
230. Workers of the commissioning team at mooring, factory and state tests
231. A ship's hewer engaged in work with hand-held pneumatic tools
232. An assembler of metal ship hulls, engaged in sectional, block and slipway assembly of surface vessels with constant combination of his work with electric tack, gas cutting and metal processing with hand pneumatic tools, as well as in ship repair
233. Mechanical mechanic for testing installations and equipment, engaged in adjusting and testing marine diesel engines in enclosed spaces and inside ships
234. Ship fitter, engaged in installation inside ships during repairs
235. Ship repairman engaged in work inside ships
236. Ship hull repairman
237. Ship rigger
238. Ship's pipefitter
XVII. Chemical production
Work performed in chemical production by profession and certain categories of workers:
239. Melting operator engaged in smelting and refining pitch
240. Steamer engaged in tearing and steaming rubber
Production of inorganic products
Calcium carbide production
241. Workers, shift managers and specialists employed in furnaces and manual crushing of carbide
Phosgene production
242. Workers, shift managers and specialists engaged in technological stages
Production of mercury and its compounds
243. Workers, shift managers and specialists engaged in technological stages, except for remotely controlled production
Production of yellow phosphorus
244. Workers, shift managers and specialists directly involved in the maintenance of mine slot furnaces, roasting and sintering furnaces, fines granulation plants, in phosphorus electric sublimation departments, in the filling of phosphorus tanks, in the maintenance of phosphorus storage tanks, phosphorus sludge, sludge distillation and in the processing of fire-liquids slag
Production of phosphorus trichloride and phosphorus pentasulphide
245. Workers, shift managers and specialists engaged in technological stages
Production of chlorine using the mercury method
246. Workers engaged in technological stages
Production of liquid chlorine and chlorine dioxide
247. Workers engaged in technological stages
Carbon disulfide production
248. Workers, shift managers and specialists employed in the retort and condensation departments
Work with fluorine, hydrogen fluoride and fluorides
249. Workers, managers and specialists (except for work performed in laboratories using hydrofluoric acid and fluorides)
Production of arsenic and arsenic compounds
250. Workers, shift managers and specialists engaged in technological stages
Production of silicon tetrachloride
251. Workers, shift managers and specialists engaged in technological stages
Production of technical iodine
252. Workers engaged in squeezing iodine
Production of organic products
Production of benzatron and its chlorine and bromine derivatives, vilontron
253. Workers, shift managers and specialists engaged in technological stages
Production of aniline, paranitroaniline, aniline salts and fluxes
254. Workers, shift managers and specialists engaged in technological stages
Production of benzidine and its analogues
255. Workers, managers, specialists and other employees employed directly in production and at the dissolution station of these products
Production of carbon tetrachloride, golovax, rematol, sovol
256. Workers, shift managers and specialists engaged in technological stages
Production of chloropicrin
257. Workers, shift managers and specialists engaged in technological stages
Production of catalysts containing arsenic
258. Workers, shift managers and specialists engaged in technological stages
Production of ziram, mercury- and arsenic-containing pesticides
259. Workers, shift managers and specialists engaged in technological stages
Chloroprene production
260. Workers, shift managers and specialists engaged in technological stages
Production of chloroprene rubber and latex
261. Workers involved in the technological stages of polymerization and product separation
Production of ethyl liquid
262. Workers, managers and specialists engaged in technological stages
Production of benzene, toluene, xylene
263. Workers, shift managers and specialists engaged in technological stages
Paint and varnish production
Production of lead litharge and red lead, lead crowns,
white, lead green and jurmedite
264. Workers, shift managers and specialists engaged in technological stages
Production of chemical fibers and threads
265. Regeneration operator engaged in the regeneration of carbon disulfide
Production of fiberglass-based products
synthetic resins (phenol-formaldehyde, epoxy,
unsaturated polyester resins)
266. Operators engaged in contact molding of large-sized products with an area of 1.5 sq.m or more
Production of medicines, medical, biological
drugs and materials
Antibiotic production
267. Filtration operator engaged in manual disassembly and assembly of filter presses with frame sizes greater than 500 mm
Extracting morphine from raw opium
268. Filtration operator engaged in manual disassembly and assembly of filter presses with frame sizes greater than 500 mm
Androgen production
269. Operator for the production of synthetic hormones, engaged in the production of testosterone preparations and its derivatives
XVIII. Production and processing of rubber compounds
Work performed by profession:
270. Vulcanizer engaged in loading and unloading products in boilers over 6 meters long, vulcanizing propeller shafts
271. Rubber mixer operator
272. Workers employed in the departments: cold vulcanization, production of radol and facts
273. Repairer of rubber products, engaged in the manufacture and repair of large rubber parts and products, vulcanization of reinforced parts (large tires, rubber fuel tanks, reservoirs, conveyor belts, etc.)
Production, retreading and repair of tires
274. Work performed by a vulcanizer, tire collector (heavy duty)
XIX. Oil, gas, shale and coal processing, production
synthetic petroleum products, petroleum oils and lubricants
Work performed by profession and certain categories of workers:
275. Coke cleaner
276. Coke unloader
277. Workers, shift managers and specialists employed in gasoline leaded process plants
278. Workers employed in extraction shops and departments of aromatic hydrocarbons production
279. Workers engaged in the preparation of arsenic solutions for the purification of sulfur-containing petroleum gas
XX. Logging and rafting
Logging work
280. Loading and unloading of round timber (except for pulpwood, mine stand and firewood up to 2 meters long)
281. Stacking of round timber (except for pulpwood, mine stand and firewood up to 2 meters long)
Work performed by profession:
282. Forest feller
283. A lumberjack engaged in felling, bucking logs and hilling logs, chopping firewood, harvesting and cutting tar resin, as well as harvesting wood using hand tools
284. Timber piler, engaged in the creation of inter-operational and seasonal reserves of logs and trees, loading trees, logs and round timber (with the exception of pulpwood, mine stands and firewood up to 2 meters long) onto timber rolling stock and unloading them, performing the work manually
285. Chokerer
Timber rafting
Work performed by profession:
286. Raftsman
287. Rigger engaged in loading and unloading rigging
288. Raft shaper
XXI. Production of pulp, paper, cardboard and products made from them
Work performed by profession:
289. Operator for preparing chemical solutions, working on dissolving chlorine
290. Impregnation operator engaged in the production of anti-corrosion and inhibited paper
291. Cooker of fibrous raw materials
292. Pulp cook
293. Woodpair
294. Pyrite crusher
295. Loader of balances into defibrators
296. Loader of pyrites, sulfur furnaces and turmas
297. Sulphate loader
298. Acid
299. Mixer
300. Acid tank liner
301. Fiber sawmill
302. Impregnator of paper and paper products, engaged in fiber impregnation
303. Sulfurous acid regenerator
304. Repairman, lubricator, cleaner of production and office premises, electrician for repair and maintenance of electrical equipment, employed in the production of sulfite cellulose and sulfurous acid
305. Sodaman
306. Paper (board) machine dryer, employed on high-speed paper and board machines operating at speeds of 400 or more meters per minute
307. Chlorine man
XXII. Cement production
308. Work performed by workers cleaning sludge pools and talkers
XXIII. Stone processing and production of stone foundry products
Work performed by profession:
309. Stone casting pourer
310. Stonemaker
311. Stonecutter
312. Mill operator busy breaking diabase crushed stone into powder
313. Stone processing equipment operator
314. Stone sawyer
315. Stone miller
XXIV. Production of reinforced concrete and concrete products and structures
316. Work as a carver of concrete and reinforced concrete products
XXV. Production of thermal insulation materials
Work performed by profession:
317. Bitumen worker
318. Cupola maker
XXVI. Production of soft roofing and waterproofing materials
319. Work performed by the digester loader
XXVII. Production of glass and glass products
Work performed by profession:
320. Quartz blower (except for those engaged in the manufacture of products with a diameter of up to 100 mm and a wall thickness of up to 3 mm)
321. Quartz smelter
322. Mirror dyer working with mercury
323. Batch compiler engaged in manual work using red lead
324. Halmovschik
XXVIII. Textile and light industry
Work performed in general textile manufacturing professions:
325. Sizing equipment operator engaged in non-mechanized lifting and removal of rollers
326. Plumber cleaning sewer trenches and wells
Primary processing of cotton
327. Work as a press operator
Hemp and jute production
328. Work as a fiber preparer engaged in breaking bales of jute
Wool production
Work performed by profession:
329. Washer of technical cloths
330. Assistant foreman employed in a weaving workshop in the production of cloth
Fulling and felt production
Work performed by profession:
331. Fuller engaged in the production of dense felts
332. Shoe fitter engaged in manual work
333. Shoe remover from lasts, engaged in removing felted shoes by hand
Tanning and leather production
335. Transportation, unloading and loading of large leather raw materials and semi-finished products manually in the soaking and ash shops of leather factories
Work performed by profession:
336. A skinner engaged in turning large leathers on blocks by hand, in the fleshing and breaking of large leather raw materials
337. Leather roller engaged in rolling large and hard leathers on rollers
338. Leather cutter
339. Sorter of products, semi-finished products and materials, engaged in sorting large leather raw materials
340. Cleaner of products, semi-finished products and materials, engaged in cleaning large leathers and large leather raw materials on blocks by hand
Production of leather shoes
341. Work as a molder of parts and products, working on Anklepf type machines
XXIX. Food industry
342. Baling waste from corrugated packaging production
Work performed in general food production professions:
343. Diffusion operator servicing periodic diffusers when loading manually
344. Ice harvester, engaged in collecting ice in reservoirs and laying it in piles
345. Bone charcoal maker
346. Cleaning machine operator engaged in manual dismantling of separators
Production of meat products
Work performed by profession:
347. Livestock fighter engaged in operations of stunning, hooking, bleeding of large and small cattle and pigs; evisceration, manual removal of cattle hides; sawing up carcasses; scalds and scorches of pork carcasses and heads; horizontal processing of cattle carcasses
348. Skin peeler
349. Skin processor
Fish extraction and processing
350. All types of work on fishing, search and reception and transport sea vessels, with the exception of sea floating crab canneries, fish processing bases, large freezing fishing trawlers and refrigerated sea vessels, where women’s labor is allowed in all jobs, excluding jobs (professions, positions) , specified in sections XXXII "Maritime transport" and XXXIII "River transport" of this list
351. Manually turning barrels of fish
Work performed by profession:
352. Loader-unloader of food products, engaged in loading grates with canned food into autoclaves manually
353. Processor of sea animals, engaged in fleshing the skins of sea animals
354. A fish processor engaged in pouring and unloading fish manually from vats, chests, ships, slots and other navigable containers; mixing fish in salting vats by hand
355. Presser-squeezer of food products, engaged in pressing (squeezing) fish in barrels by hand
356. Receiver of watercraft
357. Coastal fisherman engaged in manual hauling of cast nets, ice fishing on cast nets, set nets and vents
Bakery production
358. Work performed by a dough handler working on dough mixing machines with rolling bowls with a capacity of over 330 liters when moving them manually
Tobacco-shag and fermentation production
359. Work performed by an auxiliary worker engaged in transporting bales of tobacco
Perfume and cosmetic production
360. Work performed by a worker engaged in grinding amidochloric mercury
Extraction and production of table salt
Work performed by profession:
361. Salt piler in swimming pools
362. Pool preparer
363. Track worker on the lake
XXX. Rail transport and metro
Work performed by profession and certain categories of workers:
364. Battery worker repairing lead batteries
365. A handcar driver and his assistant working on broad gauge railway lines
366. Freight train conductor
367. Fireman of steam locomotives in the depot
368. Diesel train driver and his assistant
369. A locomotive driver and his assistant working on broad gauge railway lines
370. Locomotive driver and his assistant
371. Diesel locomotive driver and his assistant
372. Traction unit operator and his assistant
373. Electric locomotive driver and his assistant
374. Electric train driver and his assistant
375. Track fitter (if the established norms of maximum permissible loads for women when lifting and moving heavy objects manually are exceeded)
376. Porter engaged in moving luggage and hand luggage
377. Inspector-repairer of wagons
378. Pipe puncher-blower
379. Conductor for escorting cargo and special wagons, engaged in escorting cargo on open rolling stock
380. Locomotive boiler cleaner
381. Impregnator of lumber and wood products, engaged in impregnation using oil antiseptics
382. Car speed controller
383. A mechanic for the repair of rolling stock, performing the following work:
for repairing fittings on steam locomotives when washing them warmly; in fire and smoke boxes;
for blowing the bottom and gutters of electric rolling stock and diesel locomotives with electric transmission;
for disassembling, repairing and assembling drainage devices and safety valves, for inspecting and filling valves for drainage devices in tanks containing petroleum products and chemical products
384. Train compiler, assistant train compiler
385. Contact line electrician working at heights on electrified railways
386. Workers loading asbestos waste, constantly working in the ballast quarry of asbestos waste
XXXI. Road transport
Work performed by profession:
387. A car driver working on a bus with more than 14 seats (except for those employed in intra-factory, intra-city, suburban transportation and transportation in rural areas within one day shift, provided that he is not involved in the maintenance and repair of the bus)
388. A car driver working on a vehicle with a carrying capacity of over 2.5 tons (except for those employed in intra-factory, intra-city, suburban transportation and transportation in rural areas within one day shift, provided that they are not involved in the maintenance and repair of the truck)
389. Automobile repairman manually washing engine parts of a car running on leaded gasoline.
390. A car repair mechanic engaged in running-in an engine using leaded gasoline.
391. Fuel equipment mechanic employed in motor vehicles repairing fuel equipment for carburetor engines running on leaded gasoline.
XXXII. Maritime transport
392. Coastal boatswain, coastal sailor, senior coastal sailor (with the exception of those working at passenger berths of local and suburban lines)
393. Ship fireman and boiler operator engaged in servicing boilers on ships and cranes, regardless of the type of fuel burned in the boilers
394. Cranmaster and his assistant
395. Crane operator (crane operator) working on a floating crane and his assistant
396. Engine command staff (mechanics, electromechanics and others) and engine crew (machinists, mechanics, electricians, turners and mechanics of all types and others) of ships of all types of fleet
397. Deck crew (boatswain, skipper, mate and sailors of all types) of ships of all types of fleet, as well as floating cleaning stations, docks, floating reloaders of grain, cement, coal and other dust-generating cargo
398. Workers of complex teams and loaders engaged in loading and unloading operations in ports and piers
399. Crew members of all types of fleet, combining work in two positions of deck and engine personnel
XXXIII. River transport
Work performed by profession and position:
400. Loaders, dockers-mechanists (except for dockers-mechanists who constantly work as crane operators, drivers of intra-port transport and workers servicing machines and continuous mechanisms for cargo processing, with the exception of substances belonging to hazard classes 1 and 2)
401. Ship stoker employed on ships operating on solid fuel
402. Sailors of all types of passenger and cargo-passenger ships (except for hydrofoil and planing ships, as well as ships operating on intracity and suburban lines), dredgers, dredgers and mixed river-sea navigation vessels
403. Crane operator (crane operator) working on a floating crane
404. Engine crew of ships of all types of fleet, as well as crew members of ships of all types of fleet, combining work in two positions of deck and engine personnel
XXXIV. Civil aviation
Work performed by profession and certain categories of workers:
405. Aviation mechanic (technician) for airframe and engines, aviation mechanic (technician) for instruments and electrical equipment, aviation mechanic (technician) for radio equipment, aviation technician (mechanic) for parachute and rescue equipment, aviation technician for fuels and lubricants , engineer directly involved in the maintenance of aircraft (helicopters)
406. Porter engaged in moving baggage and hand luggage at airports
407. Gas station operator engaged in refueling aircraft with leaded gasoline, as well as refueling special vehicles with leaded gasoline
408. Workers engaged in cleaning and repairing the inside of gas turbine aircraft fuel tanks
409. Workers engaged in the preparation of bitumen and repair of runways and taxiways (filling joints) at airfields
XXXV. Connection
410. Operational and technical maintenance of radio equipment and communication equipment on high-rise buildings (towers, masts) over 10 m high, not equipped with elevators
XXXVI. Printing production
Work related to the use of lead alloys
411. Work on casting operations and finishing of the stereotype
Work performed by profession:
412. Printing equipment adjuster, employed in the areas of casting stereotypes, type, typesetting and whitespace materials
413. Caster
414. Stereotyper
Gravure printing workshops
415. Work in the gravure printing department (except for acceptance and packaging of finished products)
416. Work performed by an intaglio plate etcher
XXXVII. Production of musical instruments
417. Peeling and cleaning of cast iron frames of pianos and grand pianos using abrasive wheels
418. Work performed by a wind instrument parts maker engaged in the manufacture of parts for brass instruments
XXXVIII. Agriculture
419. Performing operations in crop production, livestock farming, poultry farming and fur farming using pesticides, pesticides and disinfectants (under the age of 35)
420. Maintenance of stud bulls, stud stallions, boars
421. Loading and unloading of animal corpses, confiscated goods and pathological material
422. Work in wells, slurry tanks and tanks, silos and haylage towers
423. Work as tractor drivers in agricultural production
424. Working as truck drivers
425. Removing skins from the corpses of cattle, horses and cutting up carcasses
426. Transportation, loading and unloading of pesticides
427. Laying drainage pipes manually
XXXIX. Work performed in various sectors of the economy
428. Cleaning, scraping and painting work in ship and railway tanks, ship liquid fuel tanks and oil tankers, cofferdams, fore- and afterpeaks, chain boxes, double-bottom and double-hull spaces and other hard-to-reach places
429. Painting work using lead white, lead sulfate or other compositions containing these dyes
430. Installation, repair and maintenance of contact networks, as well as overhead power lines when working at a height of over 10 m
431. Direct fire extinguishing
432. Maintenance of floating craft, dredgers with ship rigging work
433. Cleaning of containers (reservoirs, measuring tanks, tanks, barges, etc.) from sour oil, products of its processing and sulfur-containing petroleum gas
434. Work with metallic mercury in open form (except for workers employed in installations and semi-automatic machines, where effective air exchange in the workplace is ensured)
435. Mixing gasoline with ethyl liquid
436. Cleaning mercury rectifiers
Work performed by profession:
437. Antenna-mast operator
438. Bitumen cooker
439. Snowmobile driver
440. Diver
441. Gas rescuer
442. Mercury dispenser engaged in dosing open mercury manually
443. Wood splitter engaged in manual work
444. Boilermaker repairing hot boilers
445. Boiler cleaner
446. A painter engaged in preparing lead paints by hand
447. Painter engaged in painting inside containers using paints and varnishes containing lead, aromatic and chlorinated hydrocarbons, as well as painting large-sized products in closed chambers with a spray gun using the same paints and varnishes
448. Crane operator (crane operator) busy working at sea
449. A driver (stoker) of a boiler house engaged in servicing steam and water-heating boilers when loading manually with the consumption per change of solid mineral and peat fuel per driver (stoker) exceeding the established norms of maximum permissible loads for women when lifting and moving heavy objects manually
450. Paratrooper (paratrooper-firefighter)
451. Workers of the engine crew of floating cranes
452. Grinder engaged in grinding pitch
453. Repairman of artificial structures
454. Emergency repair mechanic engaged in cleaning the sewerage network
455. Rigger engaged in installation and dismantling of equipment
456. A cleaner engaged in cleaning pipes, furnaces and flues
Notes:
1. An employer may decide to employ women in jobs (professions, positions) included in this list, subject to the creation of safe working conditions, confirmed by the results of certification of workplaces, with a positive conclusion of the state examination of working conditions and the state sanitary and epidemiological inspection service of a constituent entity of the Russian Federation.
2. List of positions of managers, specialists and other workers related to underground work, in which, as an exception, the use of female labor is permitted:
general director, director, chief, technical director, manager, chief engineer of mines and mines for the extraction of coal, ore and non-metallic minerals by underground methods, for the construction of subways, tunnels, mine construction and mine tunneling departments, construction and construction and installation departments and construction and other underground structures, their deputies and assistants; chief, chief engineer of mining workshops and sections, their deputies and assistants; senior engineer, engineer, technician, other managers, specialists and employees who do not perform physical work; engineer, technician, laboratory assistant, other specialists and employees who do not perform physical work and do not permanently stay underground; chief surveyor, senior surveyor, mine surveyor, mine surveyor; chief geologist, chief hydrogeologist, chief hydrologist, mine, mine geologist, geologist, mine, mine hydrogeologist, hydrogeologist, hydrologist;
workers servicing stationary mechanisms that have automatic start and stop, and who do not perform other work related to physical activity; workers undergoing training and admitted to internships in the underground parts of organizations;
employees of scientific and educational institutions, design and engineering organizations;
doctor, paramedical and junior medical personnel, bartender and other workers involved in sanitary and consumer services.