Dear customers, to our deepest regret, our delivery schedule to addresses and delivery points is completely filled until December 31, 2019 inclusive. You can place an order by phone or using the online shopping cart on the website with delivery after the New Year holidays.

* Including delivery of orders to pick-up points.

How to choose videos?

Sport is one of the most important components of the life of a modern person. Almost everyone is interested in some kind of sport, be it football, which has come to us since ancient times, or a modern innovation - extreme skateboards, snowboards or rollers. Almost every city has its own “communities” of roller skaters who gather together, demonstrating their skills and mastery of their four, and possibly five-wheeled friends. Looking at how yet another alternative teenager slides down a high railing or jumps over a curb, sometimes you yourself want to learn and buy yourself such a means of transportation. But a lot of questions and nuances immediately arise - which model to choose, which company to trust, which roller skates to learn to ride? This is exactly what we will discuss in this article.

General information

Let's start by analyzing the design. Roller skates consist of several parts, which we will look at in more detail a little later. Now, let's see what these details are. A roller skate consists of a boot, wheels (where would we be without them), a frame on which, roughly speaking, our wheels are held, cuffs and all kinds of clips or laces. These are some of the most important components to look for when purchasing new skates.
The main point that beginner roller skaters should pay attention to is the type of roller skates. After all, various manufacturers are releasing more and more new product lines, producing innovations in the world of sports; relatively recently, rollers specially designed for high-speed running, for performing extreme stunts, and skating on railings have appeared. It’s quite easy to distinguish such videos from the rest. But such models are not suitable for beginners. To narrow down your choice, we will list the main features of video clips that beginners definitely shouldn’t buy.
There are a lot of rollers, but some of them have smaller wheel sizes. Such models are designed specifically for aggressive skating, that is, performing various tricks, especially skating on railings. If you buy such roller skates, you will never learn to ride, and you will also ruin your attitude towards this sport.
Also, don’t look for roller skates with five wheels and low boots – these are for high-speed riding. These roller skates do not have good handling and will be completely inconvenient for learning. Another interesting discovery for beginners will be the presence or absence of a brake. Did you think it was necessary to slow down? Pay attention to this, because you need the brake very much; believe me, at first there is no need for too high speeds.

Roller skate shoe

Let's start our acquaintance and instructions for choosing, perhaps, with a roller skate boot. It performs one of the most important functions - supporting the foot, that is, the level of comfort and balance directly depends on it. If the boot is the wrong size or the wrong size, your riding will be neither beneficial nor satisfying. There are several types of roller skate boots - hard, soft and combined. Each design has its pros and cons, on which our final choice depends.
Until recently, the hard boot was the most common among roller skaters. Firstly, it provides excellent impact protection and leg support. This boot is made of durable plastic with a soft sock inserted into it. This model provides good ventilation of the legs. The choice of such roller skates is quite large, so you can always choose the model for yourself. However, hard boots also have their drawbacks - the difficulty of cleaning the rollers, depending on the model, may result in insufficient fixation, which will lead to loss of balance.
Recently, roller skates with soft boots have become fashionable and are gradually taking over the markets. They allow better

fix the joints of the foot, and allow you to perform more complex tricks. Thanks to their flexibility, soft boots make you feel more comfortable in roller skates, just like in regular sneakers. However, for beginner roller skates, these skates may be more difficult to master. It's up to you to choose, especially since the choice of such videos is really very large.
Combined designs of a soft boot with plastic reinforcements are created as an option for the “golden mean”. Indeed, such a boot copes well with both protective and impact-resistant functions, as well as with good leg fixation.

Wheels and frame

The quality of the rollers themselves and, therefore, the ride comfort largely depends on the wheels. They differ not only in size, but also in material, density and quality of bearings.
You will never find good bearings in cheap roller skates from unknown manufacturers. In the case of videos from well-known brands, the situation is exactly the opposite - here they do not risk a proven name for the sake of dubious savings. But for beginners, when choosing roller skates, you shouldn’t delve into where and what bearings are - the main rule is not to go after the cheapest. If you also fall for a cheap fake with plastic wheels, you don’t even have to try to ride! Moving on such rollers is more like walking than riding. And their sound will be more reminiscent of an orchestra of armless, deaf-mute musicians playing pans. Imagine the crackle of plastic on uneven asphalt. Most wheels for modern roller skates are made of polyurethane, which provides good grip on asphalt and silent movement. The main criterion is the diameter and density of the wheel. Typically, these values ​​are indicated on the wheel itself as 72A-78. The first index, marked with the letter A, indicates the density of the wheel. The second number indicates the wheel diameter. At first glance, it is quite confusing and incomprehensible. Let's consider the basic principles of choosing wheels based on these numbers.
Density affects factors such as road grip, driving speed, and comfort. For example, for people with heavy weight, it is worth choosing wheels of increased rigidity (density). Otherwise, you will have to replace almost new wheels quite often. Products are softer, provide maximum comfort when driving on uneven surfaces and allow you to reach maximum speeds, but wear out faster.
The smaller the wheel diameter, the harsher and more aggressive the ride the wheels promote. Smaller wheels make it easier to perform difficult tricks, such as riding along railings.

Most often, there are wheels with the designation 76-82 mm; they are the most universal. For beginner roller skaters, MirSovetov recommends choosing an option with a hardness of 78A-80A and a diameter of 76-80 mm.
The frames on which the wheels are actually attached are also different. There are plastic and metal ones. For beginners in this sport, both are suitable, but for more enthusiastic roller skaters there are some nuances of choice. Metal frames made of lightweight aluminum or alloys have a greater pushing force, meaning it is easier to accelerate on roller skates with such a frame. The main disadvantage of such frames is strong vibration, which is more or less eliminated in models with a plastic frame.

Pleasant trifles

When choosing roller skates, you should pay attention to such little things as clips and lacing. A clip is a mechanical fastener designed to strengthen and secure the boot on the foot. The main advantage of a clip over lacing is the speed of fastening - after all, it will take quite a lot of time to lace the shoe correctly, and the clip automatically fixes the clasp.
Lacing secures the roller skate to the leg better. Laces, unlike clips, tighten the shoe more evenly, so it feels like you are wearing not a rollerblade, but a simple sneaker. Roller skates with laces are more suitable for performing tricks and maneuvers, since the lateral support is much higher than that of the version with clips.
When inspecting the roller fastenings, pay special attention to the heel strap. It secures the heel to properly distribute the center of gravity of the body.
Good ventilation is also very necessary for the feet of a skater. The best “ventilation” of a boot is provided by the mesh fabric, and not by the presence of holes in the plastic, as is commonly believed.

This is the most important thing for beginner roller skaters to take into account when choosing roller skates for themselves. Good luck with your ride and great tricks!

If you love roller skating or have long wanted to buy roller skates, but you still haven’t been able to buy them, it doesn’t matter, because you can make them yourself from available parts that you will definitely find on your shelves. Anyone can make these roller skates, and they won’t have to spend a penny on their production, provided they have the necessary components!)) So, let’s get started..

To make roller skates we will need:

1. A piece of thick plywood
2. Bearings (Choose at your discretion)
3. Two pieces of steel pipe thick along the inner diameter of the bearings
4. Tin strips for making fastening brackets
5. Any closed shoes (shoes, sneakers, etc.)
6. Auxiliary tool

Making roller skates

First you need to take a piece of plywood, attach the shoe to it and use a marker or pencil to trace the outline of the sole.

Then, using a jigsaw or other cutting tool, you need to cut off the excess plywood and leave only the marked sole.

Then you need to take out the insoles and screw the boots to the plywood using self-tapping screws or bolts, preferably at four points. Be sure to place a wide washer under the screws to increase the fixation area.

Now you need to secure the sock, to do this you need to drill through the plywood and the sole and thread a bolt with a washer from the inside of the shoe, and secure it with a nut from the outside. Do all these manipulations with the second shoe..

Now you can put the insoles back in and lace up your shoes.

Next, we take the bearings and cut out a cover along the width of the end, from a bicycle tire tube, it will act as a tire and, in addition, reduce noise. We put the cut rings on the bearings and proceed to the next step.

Then you need to cut two pieces of pipe according to the inner diameter of the bearings, the width can be chosen at your discretion, it is desirable that the bearings protrude slightly on the sides. These tubes need to be pressed into the bearings using a hammer or press.

Next, the resulting wheels need to be fixed to the sole. To do this, we cut out four wide strips from tin and make brackets from them, having previously drilled holes for fastening. We fit the wheels into the sole, put on the brackets and tighten them with self-tapping screws.

Well, our roller skates are ready, you can put them on and skate!

The skates are quite functional and behave well on the track, the only drawback is the rigidity of the ride due to the lack of thick rubber tires, and they make good noise. You can modify the fastening of the skates at your discretion and come up with something with the tires! That's all, I hope you liked it!))

Roller skates are one of the fastest and most maneuverable ways to move around the city. The choice of model depends on your riding style: will you only occasionally ride around the nearest park and embankment, or are you more attracted to tricks, or do you want speed?

For beginners

If you are a complete beginner, then you should opt for fitness models.

Such skates are produced with a soft boot; they are necessarily equipped with a standard brake, which in the future, as your skills improve, can be removed. The frame is elongated, which reduces maneuverability, but increases stability - this is especially important for those who are just starting to ride. In addition, such videos are usually lower in price compared to other models.

Beginners should not neglect protection. Otherwise, the very first meeting with asphalt may forever discourage (in every sense) the desire to improve further.

Even if you don’t plan to skate a lot and for a long time, it’s better to buy fitness rollers in specialized stores rather than in the nearest supermarket. Leading manufacturers are K2, Rollerblade, Powerslide, Fila and Bladerunner.

For experienced skaters

Rollerbladers who are tired of walking through familiar parks and want to go out into the city should take a closer look at freeskate models. These skates can be handled by those who already skate confidently and know how to stop without the help of a standard brake (stopping with poles and fences does not count).

These models are designed for tricks and interesting slides. Visually, they differ from fitness rollers in the very close arrangement of the wheels, the absence of a brake and a short frame.

Even if you don’t plan on jumping on them and skating around cones, freeskate rollers are superior to fitness models in terms of maneuverability, which is especially important for comfortable movement around the city.

If you are more interested in skating around the city rather than performing tricks, take freeskate rollers with a removable inner boot liner (it is also sometimes called a “felt boot”). In such models, your feet will be softer, and you will be able to air out your felt boots between rides.

Manufacturers of freeskate rollers are Rollerblade, K2 and Seba, and Powerslide and Head have separate models.

For tricks

If it’s difficult to figure out on your own whether you’ll like the tricks, go for a ride in a roller rink with an instructor or find like-minded people on social networks.

The same freeskate rollers are used for sliding and skating around cones. But in this case, the choice should fall on hard boots with a non-removable inner part, which will allow you to better feel the skate when skating. Manufacturers: Seba and Rollerblade.

Aggressive skating involves honing tricks in the skate park, using railings and inclined surfaces, which is why these skates have a special notch on the frame. Focus on the manufacturers USD, Razors, Valo, Remz, Xsjado, SSM, K2, Rollerblade and Seba.

You can ride around the city in such skates; they are maneuverable enough for this, but it will not be entirely comfortable due to the rather stiff boot.

For high speed skiing and long distances

For speed skating, special roller skate models are produced with a non-standard frame for larger wheels. If on all previous models you can install four wheels with a diameter of 80–84 mm, then on high-speed rollers 3–4 wheels with a diameter of 125 mm are installed. Such rollers best overcome surface unevenness and maintain speed.

Suitable for those who already skate confidently and plan to use roller skates to move around the city, where the asphalt surface leaves much to be desired. More information about speed skating can be found on the official website of the Speed ​​Skating League.

What to look for when trying on

When you have decided on your riding direction, it's time to go to the store. And even if you are more attracted to the prices in, when buying skates, like shoes, you cannot do without preliminary fitting. But no one forbids you to try on and find a model that suits you in a store, and then buy it online.

The videos are divided into male and female, this division is especially noticeable in fitness models. And this is not just another marketing ploy - it’s about the features of the anatomy. Women's calf muscles are larger, so the indentation at the top of the boot will be deeper and lower than on men's models.

The rollers should fit comfortably, securely fix the leg, but not pinch it.

When trying on, place your foot on the heel and only then tighten the laces and straps - this will help you not make a mistake with the size and fix the skate correctly. Feel free to walk around in the store and ride in the model you like for about 20 minutes, so you will be sure that it suits you.

Remember: the shorter the frame and the closer the wheels are, the more convenient it will be for you to maneuver on these casters. The longer the frame, the more stable you will be when riding in a straight line.

Please note the bearings, all models will have an ABEC rating.

The higher the ABEC number, the higher the manufacturing accuracy of the bearing.

ABEC 3 is found in inexpensive skates and children's models; such bearings are not worth taking. It is better if you have ABEC level 5 or 7 bearings - their ball processing accuracy is higher. But ABEC 9 will only be needed by those who ride on large wheels (larger than the standard 84 mm ones): on regular wheels you will not feel the difference between ABEC 7 and 9.

You can also buy hand rollers. In thematic groups on social networks there are quite a lot of offers for the sale of such skates: either the previous owners realized that this type of recreation was not to their liking, or experienced skaters splurged on a more interesting model and are selling the old one.

When purchasing used rollers, find out in advance whether the model you like has thermoforming.

If there is one, you shouldn’t take such rollers: the boot has already adapted to the characteristics of the previous owner’s feet. The wheels will most likely have to be replaced with new ones and the bearings washed. Therefore, the final price will be slightly higher than what you see in the ad.

An important point: do not spare money on special socks.

Outwardly, they resemble knee socks, the toe and heel are padded, and the part under the foot is made of pleasant terry fabric. These socks will protect you from where your foot touches the upper hard part of the boot, they perfectly absorb sweat and help to fix your foot in the skate even better.

What kind of rollerblades do you skate on? What do you like or dislike about the chosen model?