Additional equipment for the cascade walk-behind tractor. Why is the cascade walk-behind tractor valued?

Cascade MB-6 is a multi-purpose walk-behind tractor, one of the leaders in sales on the Russian market. The machine has a number of advantages in which it is practically not inferior to more expensive analogues. This model is in high demand largely due to its good driving characteristics and reliability. Trust in the Cascade MB-6 walk-behind tractor, as well as in all products of this brand, is confirmed by positive reviews from real motorists. The machine is widely in demand among Russian summer residents, and also finds its application in the municipal and economic spheres. Demand for the MB-6 model is also observed among farmers and gardeners. Let's consider the main advantages of the technology, pay attention to the rules for first use, and also highlight the main technical parameters of the walk-behind tractor.

The MB-6 cascade is produced by the Reduktor company. The model was designed in 2006, and in such a short time it managed to gain the trust of Russian business executives. In terms of its capabilities, this walk-behind tractor can compete with more high-end machines, as it is equipped with a powerful motor and additional functions that make work efficient and convenient, regardless of the complexity of the tasks. The ability to install various attachments significantly expands the potential of the MB-6 Cascade, and thereby makes it even more versatile.

The performance of the walk-behind tractor is designed to process an area of ​​up to 40 acres.

Design features of the equipment:

• Robust chain gear and dry clutch
• 4-speed manual transmission maintains optimal speed
• Steering column with adjustable height and horizontal position. All controls for the walk-behind tractor are located on the handle. They are located as conveniently and ergonomically as possible
• Chassis lock function if necessary
• Large pneumatic wheels – for increased geometric maneuverability

First use rules

The Cascade MB-6 walk-behind tractor needs to be run in immediately after purchasing the product. This procedure is necessary to ensure that internal parts are worn in and adapted to local weather and road conditions. Thanks to this, the car will last much longer. At the same time, the frequency of unpredictable breakdowns will be significantly reduced, and maintenance will need to be carried out only in accordance with the regulations. So, for proper break-in, it is important to follow the following steps:

• Before starting the procedure, you should remember that running-in does not involve operating the walk-behind tractor at maximum load. Only partial load is allowed - it is believed that this mode is the most favorable for running in parts
• First of all, we start the engine and let it run for 40-50 minutes at idle speed. At the moment, it is also necessary to perform maintenance on the gearbox - engage each gear one by one, and repeat this for at least 5-10 minutes
• During the running-in, various types of work are allowed, including hilling, cultivating, plowing, transporting goods, pumping water and other economic tasks. It is important that during the break-in period the load on the walk-behind tractor does not exceed half of the maximum permissible value. For example, when transporting goods, it is allowed to transport up to 250-300 kg while the permitted 500-550 kg
• The run-in can be considered completed after 8-10 hours. We drive the equipment into the garage and begin maintenance. First of all, you need to pay attention to the condition of the external panels, as well as the lower part of the walk-behind tractor and consumables. If necessary, you can add fuel, change filters, wheels, etc.
• The next day, the walk-behind tractor can be subjected to maximum load.

Attachments

The manufacturer did not provide a single attachment option in the basic configuration of the walk-behind tractor, which can be considered an advantage rather than a disadvantage. Indeed, in this case, the buyer has the opportunity to choose the right set himself, and at the same time save on unnecessary options. Let's highlight the most popular options for the Plowman MB-6:

• Potato digger, potato planter - necessary for planting and digging all types of crops
• Hiller – provides gentle care for agricultural crops
• A plow is a means for the initial processing of the earthen surface. The reinforced transmission together with the plow allows you to cope with even the most difficult virgin soil
• Blade shovel – snow removal module rigidly attached to the walk-behind tractor
• Hay mower - used for making hay, and also useful for working in the area around the house
• Water pump - a means of pumping water from reservoirs for watering crops
• Trolley, trailer - a means of transporting goods weighing up to 500 kg
• Mower is a device for cutting grass, mowing lawns, etc.

As you can see, the Cascade MB-6 walk-behind tractor is adapted for operation in any climatic zones. This is facilitated by a large range of attachments, making the equipment more versatile and suitable for a wide range of tasks.

Specifications and engine

Dimensions: length – 830 mm, width – 480 mm, width – 740 mm. Device weight – 103 kg.

Engine – DM66, four-stroke single-cylinder, volume 0.3 liters. Power – 6 horsepower. There is support for AI-92 and AI-95 gasoline. The gearbox is chain type, with needle bearings. Tank capacity – 4.5 liters. Transmission – four-speed, with two forward and two reverse speeds

Fuel consumption

The Cascade MB-6 walk-behind tractor consumes an average of 1-1.5 liters per hour. Fuel consumption may increase slightly, for example when transporting heavy loads, when driving uphill, or when using soil hooks and cultivating the soil to great depths.

Prices in Russia

The average cost of a Cascade MB-6 walk-behind tractor on the domestic market is 35 thousand rubles. The base price does not include additional equipment. A set of mounted options can be purchased separately for 10-12 thousand rubles, depending on the set of options.

Competitors: Neva MB-2B-6.0, Favorit MB Honda GX160 5.5, Caiman Vario 60S TWK+, Ugra NMB-1N12, Cascade MB61-25-02-01, Pubert Vario 55B TWK+.

Cascade walk-behind tractors can easily be called one of the most common “technical assistants” in our country. Manufacturers have done their best and equipped their product with everything necessary to obtain a multifunctional unit for all occasions.

Many owners note the high build quality, compactness of the equipment and its structural accessibility. The process of creating models takes place at the Perm plant “Reductor”, so the walk-behind tractor fully complies with the specifics of the ISO 9002 standard.

Each version of the device consists of 4 basic units: transmission, power plant, chassis and controls. The unit is often equipped with a variety of engines.

As for the chassis, it consists of a frame with drive wheels and components mounted in it. The Cascade series of walk-behind tractors are distinguished by the ability to independently determine the distance between wheels.
Moreover, the unit is often accompanied by powerful pneumatic wheels with aggressive treads. The creators of the equipment also provided for the specifics of storing the object and supplemented the design with special metal stops. They can be very useful if you need to stop the device during the work process.

The reliability of the transmission is beyond doubt, and its main task is the high-quality transmission of torque to the wheels from the engine itself. It is also an integral participant in the process of determining the speed and rotation of the device. The chain gearbox, clutch and 4-speed gearbox are the basic components of the transmission and are often located in a special unit.

Most models have multiple forward and reverse speeds for excellent maneuverability. The output shaft of the reinforced gearbox is located on bearings with a significant diameter, which are resistant to mechanical damage and the negative influence of various types of vibrations. A specialized belt drive allows the owner of the Cascade walk-behind tractor to install the necessary attachments.




1 — Retaining ring, 2 — Adjusting ring, 3 — Bevel gear, 4 — Adjusting rings, 5 — Bearing, 6 — Intermediate gear shaft, 7 — Upper housing, 8 — Output shaft, 9 — Adjusting rings, 10 — Bearing, 11 — Bevel gear, 12 — Retaining ring, 13 — Boot cup, 14 — Boot, 15 — Cuff, 16 — Adjusting rings, 17 — Lower housing, 18 — Adjusting spacer, 19 — Bearing, 21 — Cover, 22 — Gear, 23 - Gear, 24 - Shaft.


It is worth noting that the system is controlled using the clutch handle, gear rod, steering wheel, engine, power regulator and carburetor air damper. The steering wheel itself can be easily adjusted to the height of the operator, and the center of gravity is placed relatively low.

Thanks to these points, it becomes easy to operate the walk-behind tractor. This is also helped by the location of most controls directly on the steering wheel. Particular attention should be paid to the steering column, which is quickly adjustable, allowing a person, even after several hours of active work with the Cascade walk-behind tractor, not to get so tired and to adapt the basic control elements to personal wishes.

It is important, immediately after purchasing the device, to carry out a proper run-in, monitor the oil and fuel levels and not overload the machine, otherwise it will begin to fail frequently and will soon become completely unusable.

It is no secret that the engine is the “heart” of the entire mechanism and it is the one that determines the productivity of the machine, its power and efficiency. To understand all the features of a functional part, you need to get acquainted with its structure, which is correctly described in the following drawings:

In this drawing, numbered

• 1 shows a cylinder block;
• 2 – gas distribution mechanism;
• 3 – crank-rod design;
• 4 – fuel consumption system;
• 5 – ignition system;
• 6 – launch device;
• 7 – cooling system.

Similar display (left view)




This cross-sectional diagram shows:

1. Cork;
2. Cylinder block cover;
3. Dipstick plug;
4. Pin;
5. Settling filter;
6. Connecting hose;
7. Fuel tap;
8. Screw;
9. Bolt;
10. Tank mounting clamp, etc.

Thanks to the detailed display of structural parts, every car owner can replace damaged spare parts and understand the features of such an important “organ” of the device.

As standard, the units are accompanied by domestically produced engines DM-66 and DM-68.

But often a long service life leads to the need to replace the “heart” of the walk-behind tractor. The problem of engine selection is also relevant because Russian engines of this type are no longer produced. As a result, there is interest in suitable devices of foreign origin.

The most popular is the Briggs & Stratton I/C engine, which is known for its excellent machine compatibility and greater power (7 HP). The advantages of the choice include a reinforced transmission and the possibility of deeper immersion of the cutter during soil processing.

Another fairly common replacement for the original Cascade engine is the American-made Briggs & Stratton Vanguard OHV. The model is known for its incredible power (7.5 hp), so it is suitable for owners of large areas with heavy soil.


The option with Lifan 168 F-2 is also quite good. The engine capacity is 196 cm 3 . The development belongs to the class of gasoline four-stroke models, known for their practical properties (power - 6.5 hp). Air cooling will allow you to work continuously for quite a long time.

Subaru EX17 also managed to gain recognition among domestic users and demonstrate itself only in the best light. Contains 6 l. With. and is distinguished by a horizontal crankshaft.

Naturally, a lot depends on the wishes of the owner of the Cascade walk-behind tractor, his financial capabilities and the specifics of the machine itself. In order to understand what's what, you need to get acquainted with the current series of the brand and learn about their technical characteristics.

Motoblock Cascade: technical characteristics of series (modifications)

At the moment, the Cascade family includes a huge variety of models that have different frame designs, types of gearboxes and other characteristics. As for the dimensional moments, they are all almost identical:

• length – 830 mm;
• width – 480 mm;
• height – 740 mm;
• track width - with an extension - 610 mm, and without - 350 mm.

It is worth noting that the distribution of walk-behind tractors in series occurs according to the type of motor.

Series Cascade MB6-06

• MB6-06-02-01 is distinguished by a basic steering column and a reinforced gearbox;
• MB6-06-07-02 is known for its rotating column and the presence of automatic wheel unlocking;
• MB6-06-06-01 pleases owners with an increased number of speeds, etc.

In total, the series consists of 10 models, each of which weighs about 105 kg and can reach speeds of up to 10 km per hour.

Technical features of the models of this group:

• 4-stroke gasoline engine;
• Power – 6 l. With.;
• Depth of immersion in the ground – 320 mm;
• Maximum torque – 14.2 Nm;
• Working volume – 317 cubic meters. cm;
• The device to get started is a manual starter and a cord.

As for fuel, it is consumed at a rate of 1.9-2 l/hour.

Series Cascade MB6-08

• MB6-08-02-01;
• MB6-08-02-02;
• MB6-08-04-01;
• MB6-08-04-02, etc.

The differences between these models are similar to the previous series.

Specifications:

• 4-stroke gasoline engine DM-68;
• Availability of an oil pump;
• Supply of decompressor;
• Startup occurs manually;
• Number of cylinders – 1;
• Fuel tank capacity – 3.3 l;
• Engine weight – 25 kg.

Series Cascade MB61-12

• MB61-12-02-01;
• MB61-12-02-02;
• MB61-12-04-01;
• MB61-12-04-02, etc.

All models are equipped with a belt clutch and a high-quality gearbox. If necessary, they can reach speeds of up to 13 km per hour.

Specifications:

• Weight – 94.5 kg;
• Maximum processing depth – 260 mm;
• Engine power – 6.5 l. With.;
• Fuel tank capacity – 3.6 l;
• Cylinder diameter – 68 mm.

AI-92 and AI-95 gasoline are suitable for refueling Cascade walk-behind tractors of this series.
Absolutely all units of the brand have an important feature: a huge variety of attachments, which will only improve over the years.

Since walk-behind tractors belong to a number of universal assistants for agronomists, they can perform many different operations. Naturally, you can’t do without high-quality attachments.

• Trailer. Ideal for handling heavy loads. It is often used to transport construction waste, grass, harvested crops, etc. Designed for a maximum weight of 500 kg;
• Potato planter. The supplement makes the necessary furrows for laying the tubers and buries them efficiently. For those who focus on growing potatoes, such a tool will make life much easier;
• Plow. It is an essential tool when plowing virgin lands and heavy soil;
• Lugs. They will allow you to create conditions for greater adhesion of the unit to the ground during operation, because stability guarantees the quality and safety of the operator;
• Hiller. Copes well with the task of digging up an area and adding soil to the roots of plants;
• Mower. This device is an indispensable assistant if a person has livestock. It allows you to prepare hay for the winter and keep the area tidy.

Naturally, the list of available attachments does not end with the listed tools, so the owners of the Cascade walk-behind tractor will certainly be able to find very interesting and profitable objects for themselves.

In order to always enjoy the maximum functionality of the device, it is necessary not only to properly care for it, but also to be able to carry out basic repair operations.

Brief instructions for repairing Cascade walk-behind tractors

If a person notices that his technical assistant is a little “sick,” he should carefully study the information below.

What to do if:

• The walk-behind tractor does not start. You need to check the spark plug; if it is wet, it means there is an excess of gasoline and you cannot do without drying the cylinder;
• The engine has lost its former power. The reason may be simple clogging of the carburetor filter, because it often leads to over-enrichment of the fuel and the cessation of engine functionality;
• The engine runs intermittently. Most likely, the problem is a clogged muffler, which needs to be rid of excess and washed with gasoline;
• The ignition system is malfunctioning. Clean the spark plugs and adjust the electrode gap.

These problems are the most common, so repairs can be easily done with your own hands or, if you lack tools and the slightest knowledge of technology, contact specialists.

The following videos, shot by the owners of Cascade walk-behind tractors, who have considerable experience in working with the device and share it with the world, can be excellent supporting sources of information.

To combat snow drifts a snow blower is an indispensable thing. The modern garden equipment market offers a wide selection of snow removal equipment, both as a stand-alone machine and as an additional attachment to walk-behind tractors.

Gardeners often have a question: what is better and more practical: snow tractors, a separate snow blower or an attachment to a walk-behind tractor? Let's figure it out.

Device and design

All snow blowers for walk-behind tractors are conditional are divided into types:

• Screw. This type of snow blower is considered single-stage, which means the snow mass moves from the conveyor directly into the blowing mouth, from where the snow is thrown out under the influence of a strong air jet.

• Rotary. These models combine the functions of both a rotor and an auger: using a special rotating screw, snow is fed into a wide mouth with a large rotor. The rotating rotor, due to torque, transfers part of its energy in the form of additional speed to the movement of the snow mass.
• Rotary snow blowers are capable of creating a powerful stream of snow and throwing it more than 20 m.

Design of a snow blower for a walk-behind tractor is a huge shovel-bucket, which, moving in a given direction, captures the snow mass and transfers it in a thin stream to a screw conveyor (auger). This mechanism consists of a pair of screws made of narrow strips with many sharp teeth along the edges.

This design makes it possible to connect sections of the auger, and therefore significantly increase the working width.

The screw pair rotates towards the center, where the snow comes. The powerful blades spin with such force that they can crush even thick pieces of compressed snow into small pieces. The screws work in such a way that the snow moves very slowly through the mechanism.

This is necessary to ensure uninterrupted operation of the throwing channel.

When working with mounted snow removal equipment, as well as with individual snow blowers, such as Husqvarna, forte qi jy 50, cmi 163, snow fox sf16353l, lux 163, Champion 656, Patriot, Honda, Foreman is very It is important to choose the right speed I installed it correctly.

Many models of manual snow removal equipment have only one speed of movement, this is due to the fact that with such a transmission device, the process of picking up and throwing out snow is more efficient, because a strictly limited volume of snow mass gets into the gripper.

If there is a gearbox in the design, the operator has a choice, but it is considered optimal travel at a speed of 4 km per hour, and if your car is more powerful - 7 km/h. The main criterion for choosing speed is the possibility of free, continuous operation of the conveyor with the rotor.

Before starting work, read the instructions supplied with the snow blower. Pay special attention to the maximum thickness of snow cover that the bucket of your chosen model is designed for. Most often, attachments are designed for snow drift thickness not exceeding 20 centimeters.

Popular models of snow blowers

Among the huge range of products offered by manufacturers, the most popular is the following equipment:

Megaladon-0.6 rotary equipment for the Salyut walk-behind tractor for snow removal

The rotary snow removal attachment for the Salut model Megaladon walk-behind tractor is used as an attachment for clearing small areas. Installed on the walk-behind tractor from the front using a special fastening device included in the kit.

• The main working element is a screw with teeth.
• Rotating, the shaft transfers the snow mass to the center, which then falls into the crater.
• The direction of snow ejection is selected by the operator by rotating the device screen.
• The distance over which the snow will be thrown directly depends on the engine power, as well as on the angle of inclination of the snow exit device.
• The height of snow capture is regulated by special snow blower skids located at the bottom of the device.

Megaladon -0.6 to the Salyut walk-behind tractor

Model features:

• The snow blower is attached to the front of the walk-behind tractor, which eliminates the need to turn the steering wheel and operate in reverse gear.
• The ability to continue the operation of the snow blower after stopping the walk-behind tractor due to the transmission of torque from the engine.
• The screw is made using the latest laser equipment from high-quality material.
• Meets all required safety regulations.
• The snow blower chain is located in a special protective cover and is separated from the direct work area.
• The high-precision design of snow ejection ensures that all selected parameters are met.
• Lightweight design of the snow removal attachment.

Technical Parameters:

Snow plow Texas 92000160100 for the “Texas” walk-behind tractor

A specialized snow plow is installed on the Texas walk-behind tractor (as well as on the Husqvarna walk-behind tractor) from the front. The cutter is replaced with wheels. Used for clearing loose snow on narrow paths and small areas around the house. The kit includes a mount along with the blade.

The snow cover width is 75 cm. The country of origin of the attachment is Denmark. The average retail price on the market for garden equipment attachments is 6,436 rubles.

To spray all kinds of fertilizers, various fertilizers and all sorts of chemicals to protect plants from harmful insects, it’s a good idea to have a special device. The Zhuk sprayer is a friend to gardens and vegetable gardens.

All agricultural workers simply need special equipment such as a potato planter to plant various crops, such as potatoes. learn how to make a potato planter for a walk-behind tractor with your own hands.

To this day, the MAZ-5551 dump truck remains one of the most popular eight-ton trucks in Russia. Click on the link to check out this beautiful truck.

Attachments for Texas walk-behind tractors are selected individually for a specific model, since each auxiliary device is manufactured for a specific machine, taking into account its design features and capabilities.

Sm-0.6 snow thrower for walk-behind tractor "Cascade"

Snow removal attachment for walk-behind tractor The CM 0.6 model cascade captures and throws snow using rotating augers, driven by a walk-behind tractor engine.

Technical Parameters:

Snow removal attachment for the Mole walk-behind tractor

Technical Parameters snow blower for motoblock Mole:

Sp-56 attachment - snow blower for the Tselina walk-behind tractor

The principle of operation of the Sp-56 on the Celina walk-behind tractor is in breaking ice and compressed wet snow with augers snow blower and moving the resulting snow mass to the ejection impeller.

Snow is thrown through the gutter visor to a distance of 12 m, and the direction of the throw is regulated by a special lever at an angle of 190 degrees.

Useful information about the snow blower

Operate a walk-behind tractor with a snow blower attachment won't be too difficult Yes, but don’t forget to take all precautions.

The latest modified attachments are relatively light in weight and easy to operate, so take this into account and try to clear snow in a lower gear.

This way you will ensure control over the operation of the machine and can easily direct the machine in the right direction. When working watch the direction of snow emission, make sure there are no fragile objects or glass windows nearby.

By choosing a device with a powerful bucket, you can easily cope with even dense snow, and the reliable and durable shaft will remain unharmed even if stones accidentally hit you.

The most popular modification is the self-propelled gasoline snow blower, which attracted buyers with its affordable price.

Adviсe:

• Before starting work, make sure that all threaded connections are securely fastened.
• Check chain tension every 6 hours of operation. The permissible deviation from the norm is from 10 to 15 mm.
• When using the snow blower for the first time, run for 30 minutes. After turning off the engine, check the tightness of the fastening.

By purchasing modern mounted snow removal equipment, you make your garden walk-behind tractor a multifunctional device, designed to work in different seasons. Choose a snow blower only in specialized stores that are responsible for the quality of their products.

If you have a Cascade or Neva walk-behind tractor, then in order for it to work for you at any time of the year, we suggest using attachments. Additional equipment can be used not only for plowing the land, but also in winter for snow removal, in summer for mowing grass, in autumn for harvesting and more. Various towing devices will make the walk-behind tractor a universal assistant all year round.

Mounted equipment Cascade, Neva

Each walk-behind tractor has an output shaft at the rear, to which various trailers or attachments are attached.

The plow is considered the most important equipment, because it performs the most difficult task - plowing virgin soil. Heavy walk-behind tractors, such as Neva or Cascade, cope especially well with this. Crow's feet and tillers cultivate the soil, crush weeds and form a homogeneous soil. The hiller, or as it is also called the tiller, will help make furrows for planting potatoes. The digger will harvest crops, such as potatoes or other root crops, and the adapter trailer will transport the load to the desired location. For better traction with the ground and stability of the walk-behind tractor, use lugs and buy weighting materials. If your area is overgrown with grass, then purchasing a rotary mower will allow you to easily cope with it.

Assortment: Agro, Forza, Tselina

All this and other equipment will greatly facilitate work and significantly save time. Check out the range of attachments for walk-behind tractors Neva, Cascade, Agro, Tselina and make it easy for you to solve the necessary problems! See a large range of products in our store catalog.

The "Cascade" walk-behind tractors are similar in the way they attach attachments to many Russian, Belarusian and Chinese walk-behind tractors. For this reason, both proprietary and third-party attachments can be used for them. Below is a more detailed description of attachments for “Cascade” walk-behind tractors.

Okuchniki

Examples of hiller models: Strela-3, Lepestok, Strela-2. Some products have a reinforced design, so they last longer.

The plow is one of the most popular attachments for a walk-behind tractor. You can install a plow of any model on the Cascade, but it is better to give preference to simple designs.

Plow Mole Plow reversible Plow PN-1-20MB

Possible models of plows for Cascade walk-behind tractors: reinforced universal plow, universal plow PNM-1-20, plow with skimmer, reversible, with support wheel and others.

Tracked modules

A module or attachment with tracks allows you to make a heavier and more powerful structure out of a walk-behind tractor.

The attachment to the “Cascade” is also suitable for the “Neva” or “Oka” walk-behind tractor.

Hitches

The hitch is necessary for connecting attachments to the walk-behind tractor. The average weight of the hitch is 5 kg. Product dimensions: length 43 cm, width 13 cm. Using the hitch, you can attach a hiller, plow, harrow and other devices to the “Cascade” walk-behind tractor.

Double universal reinforced hitch

Milling cutters for the Cascade walk-behind tractor can be conventional, collapsible, bolt-mounted, equipped with stoppers, crow's feet, without shafts or with shafts. Milling cutter sets usually include knives, bushings, connecting shafts, stoppers, bolts, nuts, and lock washers.

Also, depending on the power of the walk-behind tractor, it is possible to install a solid cutter, for example, a Fighter (length 140 cm), or a branded Centaur soil cutter with 6 knives with a protective housing.

Potato planter

The potato planter for the Cascade walk-behind tractor has the following parameters:

• track width 40-50 cm,
• planting depth can be adjusted from 10 to 15 cm,
• The permissible size of tubers is up to 6 cm in diameter.
• The width of the “Cascade” potato planter is 45 cm.
• length - 70 cm (excluding handles),
• height - 60 cm.

The weight of such a device is 22 kg. Several more models of potato planters: KP-1 Expert, KS-12, KSC-1, K-1L and others.

Potato digger

Recommended models of potato diggers for "Cascade" walk-behind tractors: KM-3, KMT-3, KMT-1, A5. You can use a conveyor digger with a Premium active knife. The potato digger used for Centaur models, which weigh more than 100 kg, is suitable.

It is allowed to use digging machines from Zirka, Intertul, Volodar, KM-2, K-30 and others. Take into account the weight of the unit and the dimensions of the digger; attachments that are too heavy are not suitable for small-weight walk-behind tractors.

Snow removal equipment

Winter operation of the Cascade walk-behind tractor involves the purchase of attachments for snow removal. Such equipment includes snow blowers, for example, auger blowers, from any manufacturer.

Snow blower Neva

Models of snow blowers suitable for walk-behind tractors "Cascade": WM1050, GN (width 50 cm), GRUNFELD ST360, AL-KO SnowLine 560. It is acceptable to use snow removal modules from manufacturers Korund, Neva, Skiff, Patriot, Volodar and others.

Blade

The blade shovel used for clearing snow together with the Cascade walk-behind tractor can be regular or reinforced, with or without a rubber pad along the bottom edge.

Standard blade width for walk-behind tractors: 1 m. Blade shovels are produced by such manufacturers as TM Yarilo, Zirka, Korund, Volodar, Buff, Brigadier and others.

Mowers

Many models of mowers are suitable for the Cascade walk-behind tractor, for example: SHIP rotary mower, Motor Sich rotary mower, Forte belt mower, Centaur KR-02, K-1 from Zubr, Zirka, Patriot and others.

For more delicate work than simple grass mowing, the manufacturer recommends using segment mowers.

Rotary mower Zarya Rotary mower Patriot KKR-4

Adapters

The adapter is a riding structure attached to the walk-behind tractor. It is equipped with a seat for the operator of the machine. Models of adapters suitable for use with the “Cascade”: motor-tractor adapter from TM Yarilo, “Boot”, AU-1, BUM-3, universal adapter for walk-behind tractors Zirka, Neva, Patriot, Motor Sich AD-2V.

Front walk-behind adapter

Speed ​​reducers

The creeper is designed to increase the traction force of the unit by increasing the torque. For the Cascade walk-behind tractor, as for other units, the speed reducer is selected based on the power of the unit itself.

Creeper "ZIRKA-135"

That is, to a 6 hp walk-behind tractor. you need a device marked “for cars with a power of 6 hp.” For the Cascade walk-behind tractor, you can use creepers Zirka - 105-135 (width 50 cm, length 24 cm, weight 17 kg), Pubert, Solo, Husqvarna, Viking, Robix, TM Yarilo and others.