Photo session in a blooming apple orchard. How to conduct an interesting photo session under blooming apple trees? Until the end of the promotion

Burning files to disk is a proven method of saving important information in a safe place. True, there is one “but”: not always and everyone has a “blank” suitable for recording at hand. And if you are now faced with such a problem, do not rush to get upset ahead of time! After all, you can use absolutely any old scratch disk that you have to record data.

"Disk Studio" is a multifunctional one that will help you capture the folders you need from your computer and separate files or erase unnecessary information from already full disks. Read the article and you will learn how to clean up the disk in this application.

Step #1. Download the program from the website

To get started, visit the special page on our website where you need. Once the download is complete, run the installation file and follow the instructions. Select the location where you want to place the program and wait until the archive is unpacked. Then start working with the application by double-clicking on the software icon.

Step #2. Launch the program and specify the desired option

The main menu of “Disk Studio” will open in front of you, where you need to select and specify the operations that the program should perform. The application allows you to work with both CD and DVD disc ami. You can quickly figure out how to clear a DVD disc of old files, and then burn songs, videos or any other data onto the selected media. To delete information from a disk, click on the “Copy and erase” tab and select “Erase disk”.

Step #3. Clear your disk of unnecessary files

A mini-menu will appear on the screen in which the program will prompt you to determine the working drive. This should not be a problem, because, as a rule, in most cases there is no choice: in computers and laptops there is only one, if no external device is connected to the equipment. Click the "Open Drive" button and insert the disk, then click "Erase Disk" and wait for the erase to finish.

Step #4. Rewriting an old disc

Unfortunately, there are some discs that cannot be cleaned. But they can be rewritten! In any recording option, specify for the program the files that you want to commit to disk. Knowing about this and films, you will free yourself from unnecessary spending.

To rewrite an old disk, configure additional parameters: speed, the name that needs to be assigned to the disk, if necessary, request its verification and turn off the PC after recording is complete. Don't forget to insert the disc into the drive. When the program asks for confirmation to overwrite and delete files, click Yes.

Now you know how to clear the disk from unnecessary files. As you have already understood from the article, “Disk Studio” is a convenient software for working with disks. You can quickly write absolutely any information to external media or rewrite old disks, filling them with new and useful data.

How to clean a DVD disc

Computers are an integral part of our work, everyday life, and leisure. However, with this widespread use and distribution of computer technology, ordinary users have certain difficulties with its operation. In particular, with regard to working with disks. Not everyone can figure out how to clear a DVD from an existing recording so that a new recording can be made. And it's not as simple as it seems. To simplify this task as much as possible, it is better to use a special program. How to clean a DVD disc and how to do it literally in one click will tell and do it special application for burning CDs, DVDs and Blu Ray discs - “Disc Studio”.
How does this work? Everything is elementary! Now you don't need to be a big computer professional to complete this task. Actually, like a number of others, now the problem will not be the question of how to clean a DVD disc, nor how to record a new one on it - music or video.

So, cleaning the media is a separate function in the program: select the desired drive with a disk and press the “Clean up disk” button. If necessary, you can now overwrite and clear again an infinite number of times.

Even more - the program opens a whole series new features: creation beautiful design to your disk. For example, if you are compiling a home archive or preparing promotional materials for a presentation or handouts. You can choose a disk image or use graphics. Everything that might be necessary and everything that might come to mind is now easy, accessible and simple!

An important nuance is that working with the Disk Studio program, which can be downloaded on the website, helps save all valuable data from loss or unintentional destruction.

"Disk Studio" is good decision for those who want not only to simplify their communication with technology as much as possible, but also to simply “keep up the brand” in everything. Order in your own archives and light work will be provided.

You often come across the fact that a previously perfectly playable disc suddenly stops loading or the files loaded on it simply do not open, although the drive seems to have detected their presence. What happened in this situation? Is the drive broken or is it time to throw this disc in the trash? There are several ways to try to solve this problem yourself without drastic measures to replace the drive or remove the disk itself from use.

1. To determine whether the drive is the cause or not, you need to try playing several discs using it. And if he doesn't read only specific option, then it’s not about him. If the situation repeats when discs stop reading or are problematic to play, then this is a problem with the drive.
2. In the case of a problem disk, you must first clean it of dirt. There are many means for cleaning them, but from experience we can say that there is no point in spending money on any liquids - discs can be easily treated in warm water and soap. After this procedure, they must be blotted with a well-absorbing towel and allowed to dry before placing them in the drive again.
3. In the case of a dirty laser read head of the drive, you can get by with purchasing a special “cleaning disk”. Or you can remove the drive from the computer and disconnect the protective cover by moving it backwards and upwards. Then you need to use something thin but strong, for example, a pin on the front panel through the hole, to press the latch and open the tray that blocks access to the lens by pressing on it. It is necessary to blow off large dust from the surface of the lens using a can of compressed air or even an ordinary blower, but in no case with your mouth. The pear must be without talc inside, otherwise everything will become even worse. Using a brush and lens cleaning liquid, you need to rinse the lens thoroughly, making light movements that do not press on it at all. After this, the lens should dry, and to prevent dust from getting on it again, it is better to cover it with something during the drying period. If plaque forms after drying, it must be removed with a dry soft brush. After this comes the process of assembling the drive.

The disc itself may not only be dirty, but also heavily scratched, which also affects the ease of playback. It is possible to restore its surface by polishing. With large and deep scratches, it is unlikely that anything will work out, but if there are a lot of thread-like damage on it, this option can be “cured.”

The simplest method requires clean rags and goyim paste. The disc must be well wetted with water and a little paste applied to it, which must be spread evenly over the entire surface of the disc. Then, using a rag, you need to polish from the center of the disk to the edges until the paste simply disappears. The number of such processes will depend on the state of the disk after each stage. As soon as the disappearance of the most conspicuous scratches is noted, the disc can be considered to be polished. After polishing, the disc should be rinsed thoroughly, blotted and allowed to dry. After this, you can try to play back the recording.

And at the end little advice. If you need to download a driver for your printer, scanner, modem or laptop, you can always do it on the website

Although DVDs are already becoming obsolete, they are still available on many computers and laptops. Many people have a licensed Windows system that is stored on a disk and requires a DVD drive (although it can be installed from it). Therefore, I want to consider in this article how you can clean the DVD drive in your computer or laptop yourself, using simple tools.

I have been using the method described below for many years and it has proven to be very effective.

The reason that the DVD drive began to work poorly, does not read discs or does it intermittently, most often is dust getting on the laser lens. This is what we will clean.

Required tools:

• Philips screwdriver (cross);
• A regular paper clip (it needs to be bent);
• Cotton swab or swab.

Tools

How to clean your computer's DVD drive

First, remove the DVD drive from the computer. You don't need to do this on a laptop.

Turn it upside down and unscrew the 4 screws that secure the lid.

Unscrew the screws

Very carefully remove the lid and set aside. We will see a board with electronic components.

Bottom of DVD-ROM

Now we place the drive so that its front panel faces us. We insert our straightened paper clip into the small hole intended for emergency opening of the drive tray. Feel free to press on the paper clip until the tray comes out of its place a little.

We press here with a paper clip

We manually pull out the tray to about half its length. Now remove the front plastic panel. To do this, you can press the side latches with a screwdriver.

Side bezel latches

Removing the panel

Now turn the drive over with the cover down and carefully remove it from there.

Let's get it DVD drive from the lid

Now you can see the very laser lens that needs to be cleaned. Look at it carefully. Most likely you will find small hairs or dust on it.

Do not try to remove dirt with your hands. There may be greasy stains that will be difficult to remove.

Let's take it cotton swab And light movements brush off dirt from the lens. There is no need to polish the lens, just remove dust and hair.

Cleaning the lens with a cotton swab

To be able to rewrite data on a DVD, you must have a DVD writer (DVD+RW format) installed on your computer. In modern laptops and computers of the latest configuration, as a rule, such DVD-roms are already included in the equipment package.

There are two types of DVD discs - rewritable (RW) and non-rewritable (R). In the first case, you can use the drive several times, deleting and writing new data to it again; in the second option, information can be written to the disk only once. In our case, we need DVD RW. Before writing new information to a disk with data already on it, you must delete the old data (format the disk). This can be done using a special software, or installed on your computer using your own means operating system.

How to delete information from a disc - DVD+RW or CD+RW

If your computer has Windows XP or earlier versions of the operating system installed Windows systems, then it is best to use special programs. For example, which is one of the most popular among PC users. It allows you not only to clean the disk from old information, but also write new data to it. The program is especially popular because, in addition to stable operation, it also has a very convenient and visual interface.

You can download the Nero installation file for free on the Internet and then install it on your PC, following the installer's instructions step by step. After this, it is best to restart your computer, then insert the desired disc into the DVD drive and use the desktop shortcut to launch Nero Start Smart.

In the main menu of the program window that opens, find the “Advanced” function and click on it. In response to this, a dialog box will open in which you need to click on "Erase DVD", thereby activating the “Program Operation Wizard”. The wizard will display prompts on the screen, using which you can clear the disk of unnecessary information. Once the disk is successfully formatted, a notification will appear on the monitor screen.

Use built-in disk cleaning programs

Operating systems Windows Vista and Windows 7 have clear and stable built-in capabilities for formatting DVDs. After the system independently detects the disk installed in the drive, a dialog box will appear on the monitor screen in which you need to click on the “Burn files to disk” function. In the new window that opens, you need to select the disk name, then click on “Show formatting options” to set the parameters for future recording to the disk. If new information will consist of files of the same type (for example, movies or music), then you need to select the Mastered option so that the disc can be read well by the equipment that reproduces these files. To collect files on one disk various types It's better to choose LFS. Having specified the desired parameter, click on the “Next” button. In response to this, the formatting process will automatically start, after which a corresponding message will appear on the monitor screen.

Useful video

We have prepared a video especially for you on how to clear data from a CD/DVD disk: